Ultrasonic Cleaner with PLC Medical Type

INTERSONIK MIDI 50 PLC

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Csdpfju S Ahqjx Agpegl Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Scattered light Cgjdpen Arm Tjfx Agpjl

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm Csdpfxjg Iirno Agpjgl strip thickness: 1 - 5 mm

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. * Technical data will follow shortly * For self-dismantling and collection. Cgedpolf H Tcefx Agpsl

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2 year 2022 Control Siemens SlimLine Cgjdpfx Agexyi Hwopsl Travels: X-500 mm Y-450 mm Z-400 mm B -5 / +110 ° C 360 ° Spindle max 15,000 rpm Tool magazine for 60 tools BBT40 Through-spindle coolant 70 bar Chip conveyor Filter paper High-pressure coolant pumps Workpiece probe, tool probe Quickset (rotary axis calibration) Machine in very good condition, available at our warehouse in France, 01360 Loyettes.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Cgedpfx Ajwuddvegpel Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. Cgodpfovcfi Djx Agpjl The Machine can be inspected under power.

Condition: used, Year of construction: 1998, machine/vehicle number: 10870, Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Cgjdouqd Abopfx Agpol Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton Standard configuration BRUDERER precision roller feed BBV 205 / 120

Condition: excellent (used), Year of construction: 2013, operating hours: 24,666 h, functionality: fully functional, - Top functional packaging machine (thermoforming machine) of the PowerPak series. - Perfect for packaging pasta products. Cgjdjua Hchspfx Agpjl - Viewing under production conditions (packaging of gnocchi) possible at any time. - With matching feed belt and ExaktaPack brand scale (included). Technical details GEA PowerPak: - Film width: 350 mm lower web, 334 upper web - Approx. 12 cycles / minute - Forming tools: 1.1, 2.1, 2.2 - Rigid film, PP, PET, etc. - Bottom web preheating - Longitudinal and cross cutting with silent edge strip winding - Machine length approx. 9m - Draw-off: 60 mm - Busch vacuum pump (included) - Eject station and distribution pneumatic - Flow cooler for cooling form and seal stations. Additional information on request and/or inspection gladly possible.

Condition: ready for operation (used), functionality: fully functional, power: 114 kW (155.00 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 25 kg, tire condition: 50 %, axle configuration: 2 axles, number of seats: 1, Year of construction: 2015, operating hours: 8,454 h, machine/vehicle number: 250M301296, Equipment: UVV, additional headlights, air conditioning, cabin, crane, hydraulics, trailer coupling, 6.20 + 4.80 m incl. generator Sorting grab Polyp grab Lifting magnet all with quick coupler also available: Atlas 230MH | 2011 | 6.80 + 5.00 | Polyp grab Liebherr A904C | 2011 | 6.60 + 5.00 | Polyp grab Csdpfx Aetucngsgpogl