CNC Compression spring machine

JD 525

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 3 Standard slide units Working range: Nsdpfx Akjl D N Hvocola wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: Nledswp Rqfepfx Akcsa • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Nlsdpfxjvbd Ezs Akcea Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units Nodpfxetzlzas Akcjla 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Nlodpfxjd H Ur Ae Akcea Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Njdju Hmacepfx Akcsla Machine cleaned and repainted

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Nsden E N Ndjpfx Akcsla Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: Njdpfx Akodfgg Iecsla A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), CPM 2000 granulator, 90kW engine Nedewcdpnepfx Akcjla die diameter 410mm We have several pieces

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Upgraded to the latest standard with spare parts support in 2015 Njdpfev Sz Tdsx Akcela Supported bag types: Quicklime, hydrated lime, cement, gypsum