Sleeve Setting Machine

JUKI DP-2100

Condition: good (used), 50 pcs on stock many models Ledpfx Agelif N Iozjak

Condition: ready for operation (used), Year of construction: 2012, A total of seven post bed sewing machines Dürkopp Adler with 2-needle system are available. Year of manufacture: 2x2012/3x2013/2x2014, roller foot diameter: 35mm, max. stitch length: 5mm, max. sewing speed: 3000stitches/min, needle system: 134LR, max. presser foot lift: 12mm. An on-site inspection is possible. Laedpfx Agsxnbtlozok

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit Laedpfefl Iqusx Agzsk 4x8 kw heating wire 32kW 160 ° C max

Year of construction: 2024, condition: new, AMF Reece S4000-ISBH AMF Reece S4002-ISBH AMF Deco 3000 ATT Motor DC Drive Sewing Speed 1,500 - 3,800 spm Stitch Type Single Thread Chainstitch Stitch Density 3 - 12 s/cm (8 - 30 spi) Stitch Bite 1.7 mm - 2.3 mm (1/15" ~ 3/32") Number of Buttonholes 1 - 8 Distance between buttonholes 4 - 63 mm (3/16"~2-1/2") Adjustable in Program Buttonhole Length 15.8 mm - 25 mm (5/8" - 1") Max Distance from Edge 67 mm (2-5/8") Max Distance First to Last Buttonhole 63 mm (2-1/2") Angle Adjustable 0~6° Thread Trimming Pneumatic Recommended Thread Core Spun Polyester #50 Recommended Needle AMF Reece Series 750 #90/14, #80/12, #70/10 Clamp Height 12.7 mm (1/2") Max Work Thickness 3 mm (1/8") Clamping Step Motor Lubrication Semi-Automatic Control System PLC Table Types Crosswise Electrical Requirements 230V, 50/60Hz, 1 Ph Air Requirements 5.5 basr (80psi) 14ℓ/㎥ (0.5cfm) Ljdpfxjtp Nwbj Agzjak Dimensions Head and Table 1100 mm(L) x 600 mm(W) x 710 mm(H) Dimensions Packed Weight 1300 mm(L) x 770 mm(W) x 1150 mm(H) 171kg

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. Lajdpfxsf Dc D Hj Agzsk 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor,

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Laedpfx Agew Tt R Iozok Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Year of construction: 1999, condition: used, Lattice girder line PITTINI IMPIANTI (Italy) Lodpsikvg Nsfx Agzjak Brand name – Pittini Impianti ( made in Italy) Built year – 1999. Still installed, under power, production stoped 5 years ago. Min – Max UPPER longitudinal wire diam. - 5,00 – 12,00 mm Min – Max LOWER (2 wires) longitudinal wire diam. - 4,20 – 12,00 mm Min – Max Fret(zig-zag) wire diameter – 3,60 – 8,00 mm Min – Max lattice girder height – 90 – 250 mm Lattice girder base width – 100 mm Lattice girder pitch – 200 mm Min - Max. Cutting length (run-out table) – min. 3,60 m - max 12 meters. Min. Cutting length – 200 mm Max speed (capacity) – 24 meters per minute Power – 380 V , 50 Hz Total installed power – 85 kW

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. Lajdpfx Agsr Ix Igszok All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston Lodpfx Aev D Nxlsgzsak

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Laedpfsq Ii S Esx Agzok