Grinding flanges, diamond stones, grinding magnet

Jung

Condition: used, functionality: fully functional, Grinding length approx. 500 mm Grinding width approx. 200 mm Magnet size 450 x 175 mm (SINUS magnet) Speed, continuously variable, up to 30 m/s Machine connection power approx. 3.7 kW Psdpfo Agpf Eex Adxorc

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, - CHMER-FANUC Control - Max. workpiece dimensions: 800 x 560 x 215 mm - Max. workpiece weight: 350 kgs - X-axis travel: 400 mm - Y-axis travel: 250 mm - Z-axis travel: 220 mm - U/V axis: 60/60 mm - Maximum chamfer cut: +/-14.5 degrees - Wire feed speed: max. 330 mm/s - Machine dimensions (L x W x H): 2100 x 2600 x 2000 mm - Machine weight: approx. 2700 kg Accessories - EROWA collection system - Cooling water system Prjdpfx Asyr H Rfjdxsc - Dielectric cooler - Machine documentation A robust, precise, and high-quality Taiwanese wire EDM machine is for sale. The machine was used by a small family business that closed at the end of last year.

Condition: used, Width x Depth: 450 x 175 mm Height (approx.): 120 mm Prjde Aggcyjpfx Adxsc Pitch: 10 mm

Condition: good (used), grinding length: 400 mm, grinding width: 150 mm, Table length 400 mm Table width 150 mm Grinding length 400 mm Grinding width 150 mm Design: hydraulic Max. distance from table to spindle center line 350 mm Table speeds: continuously variable from 0.00 m/min up to 0.0 m/min Automatic vertical feed: from 0.000 mm up to 0.013 mm Diameter of grinding wheel 00 mm Width of the grinding wheel 16 mm Grinding wheel speeds: from 800 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor 0.30 HP Machine weight approximately 900 kg Overall dimensions of the machine: Length 1300 mm Width 1000 mm Height 1500 mm Predsvga Suepfx Adxjc

Condition: used, Abdreharm RA 1, Abrichtbereich: aushoehlend 0,5 - 32 mm (104 - 162 mm) umfassend 0,5 - 22 mm Abdreharm RA 2, Abrichtbereich: Pedpfx Ade Uryzsxerc aushoehlend 154 - 210 mm umfassend 10 - 65 mm Abdreharm RA 3, Abrichtbereich: aushoehlend 22 - 70 mm (66 - 120 mm)

Condition: used, Year of construction: 1961, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 270 mm grinding length: mit Magnet: 500 mm Distance Spindlecenter - clamping surface area, min:: 350 mm grinding spindle speed: 1000...4700 U/min table surface area: 720 x 200 mm Prodju Ngg Uepfx Adxsc table load capacity: 60 kp magnetic plate size: 455 x 180 (Gleichstrom) mm magnetic-table: vertical kippen 90° längs Stück total power requirement: 2,0 (2,7 PS) kW weight of the machine ca.: 1600 + 176 kg Gleichrichter kg dimension machine xH: 1,4 x 1,8 x 1,7 m transport measurements machine: 1,4 x 1,8 x 1,6 m dimensions electric cabinet: L: 850 x B: 450 x H: 1.100 mm dimensions of grinding wheel: Ø 225 x 20 x Bohrung Ø 51 mm mm The magnetic plate (24V) is cooled. Grinding spindle: The grinding wheel infeed is electric, vertical 270mm, infeed z-axis 0,002 mm to unlimited inching infeed 0,001 - 0,010mm Peripheral speed max 35 m/sec. allowed equipped with coolant tank, pump and magnetic separator, as well as grinding wheel - size Ø 152 x 14mm plus various accessories (in the cabinet) like some grinding wheels and balancing flange The machine is pre-equipped for an exhaust system. *

Condition: good (used), Year of construction: 1981, functionality: fully functional, overall weight: 2,200 kg, Machine in good condition. Prodpfj Afp R Dsx Adxoc Magnetic clamping plate, 600x200. 1 flange. Can be tested while powered on.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: 310is-WA, number of axes: 5, This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Additional equipment • Includes all accessories in the photos • Includes digital documentation Machine Benefits Technical Machine Benefits • Internal dimensions of the work tank: 1100 x 800 mm • Wire diameter: 0. 1 mm to 0. 3 mm (0. 25 mm present on the machine) • Wire spool capacity: up to 16 kg • Automatic wire cutting and feeding Extra Information Psdpeyali Aefx Adxsrc Machine still under power

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg Predpfx Aoyh Amljdxsc - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,700 mm, total length: 2,300 mm, total width: 1,500 mm, Empty weight: 2.000 kg - Serial number: OF50-158 - Drive system: Conventional - Power [kW]: 2.6 Pedpfxowningj Adxerc - X-axis travel [mm]: 500 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 400 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 400 - Magnet depth [mm]: 140 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Options: Digital readout - └ Type of digital readout: VisoData - Control: Conventional - Motor power: 2.0kW - Transport dimensions: 2300mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 6,800 h, Neuson 3402 Year of manufacture: 1999 Approximately 6,800 operating hours Lehnhoff MS03 quick-change system Hydraulic tilting bucket 1 digging bucket Tracks approximately 75% worn Prsdpfxsz Hirke Adxec Swivel joint sealed Wear and tear consistent with age Door included Ready for immediate use Delivery possible

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Prsdpjy Naw Iefx Adxsc Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min Predpfsz Agz Rsx Adxjc 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Psdjizka Ijpfx Adxerc Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1996, JUNG JF 600 Surface Grinding Machine Jung JF 600 Year of manufacture 1996 Overhauled in 2018 Excellent CONDITION The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 1993 / 2018 Table length: 600 mm Table width: 250 mm Axis movement: Longitudinal travel (X-axis): 600 mm Cross travel (Z-axis): 280 mm Maximum distance between table and spindle center: 500 mm Grinding length: 600 mm Table speed: Continuously adjustable from: 1 m/min to: 24 m/min Creep feed: from: 0.03 m/min to: 0.40 m/min Automatic cross feed: Continuously adjustable from: 0.010 mm/min to: 10000 mm/min Connection: 50 Hz 3x 380 Volt Grinding spindle motor: 9.5 kW Total power requirement: 13 kVA Machine weight approx.: 2500 kg Predpfjyxdaljx Adxjc Machine dimensions: Length: 2910 mm Width: 2320 mm Height: 1840 mm Additional equipment: Coolant system About the machine: For sale is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. A grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this machine ideal for toolmaking, jig and fixture construction, and small batch production. This model series is characterized by extensive standard equipment and ease of use. The robust spindle head design and the double V guideways in both the longitudinal and cross axes guarantee long-term precision. The intuitive controls make operation easy and significantly increase productivity. The guideways are regularly lubricated via central lubrication. The Jung has been mechanically and electrically checked by us. Take advantage of the opportunity to view and test the Jung on site under power. Further surface grinders from well-known manufacturers can be found on our website.