Heavy Forklift - Diesel

Kalmar DCE150-12

Condition: good (used), machine/vehicle number: 3375, Year of construction: 2007, load capacity: 15,000 kg, lifting height: 4,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,250 mm, total width: 2,950 mm, operation weight: 24,180 kg, additional equipment features: Front mud guards, Warning triangle, Centralized greasing system, Equipment: lighting, Kalmar DCE150-12 from Uniktruck Ijdpfx Aew Tm Hpjhyeht

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 1 pc 1000kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1/Dyn5/Dyn11, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Ijdol Tm Uvopfx Ahysht

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,812 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,695 mm, fork carriage width: 2,500 mm, empty load weight: 20,440 kg, total length: 5,325 mm, drive type: Diesel, construction width: 2,560 mm, Diesel forklift Load center: 1200 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Ijdpfxjwq Eyqj Ahyeht Front tires size: 12.00-20 Rear tires type: Superelastic Rear tires size: 12.00-20 Description: In addition to this Kalmar model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing & financing with favorable conditions are always possible for us. We are also happy to buy your used vehicle directly, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DCE150-12. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upward. We are also happy to display your vehicle for consignment sale. Sideshift, fork positioner, Heater, full cab,

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,812 h, load capacity: 15,000 kg, lifting height: 3,030 mm, fuel type: diesel, mast type: simplex, construction height: 3,200 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 20,440 kg, total length: 5,325 mm, drive type: Diesel, construction width: 2,560 mm, Diesel Forklift Load center: 1200 mm Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Ijdoxtragjpfx Ahysht Front tires type: Pneumatic Front tires size: 12.00-20 Rear tires type: Pneumatic Rear tires size: 12.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing at attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCE150-12. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to display your vehicle with us for commission sales. Sideshift, fork positioner, heating, full cabin,

Condition: used, Year of construction: 1997, functionality: fully functional, 2500 kVA cast resin transformer, manufacturer Veneta, year of manufacture 1997, 20 kV ± 2.5% / 400 V, with rolling wheels, HV/LV connections on top, Dyn5, 6.4% uk. Isdpfx Aow I A Dtohysht

Condition: used, Year of construction: 2011, load capacity: 15,000 kg, total length: 7,700 mm, Diesel forklift Kalmar DCE 150-12 Ihjdpfxexd E Tzj Ahyet Drive Diesel Year built 2011 Lifting weight (kg) 15,000

Condition: new, Year of construction: 2023, New cast epoxy resin dry distribution 3 phase transformer manufactured by SEA Italy, 800kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked. Ijdpendn Hrsfx Ahyoht

Condition: used, different types available Iedpfxsdc A Sbj Ahysht

Condition: new, machine/vehicle number: wtcs750s, Westtech Woodcracker CS750 Smart - available immediately Equipment: Ihodeiady Espfx Ahyot - Tiltator can be rotated continuously - Cutting diameter: 750 mm - Grab opening width: 1,280 mm - Own weight (basic - fully equipped): 820 - 980 kg - Recommended liter output: 65 - 110 l/min - Recommended operating pressure: 230 -280 bar - Service weight of carrier vehicle: 15 - 30 t - Saw box: actively suspended - Chain lubrication of saw: grease - Optional: Power tiltator can be rotated continuously Available in multiples / fits perfectly with Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be offered in conjunction with a Magni. Also fits Merlo. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you!

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Iedpfx Ahowx Aaqjyeht Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Availability: short-term Location: 63934 Röllbach