IMA AXIS CARD

KERN

Condition: used, Year of construction: 2006, functionality: limited functionality, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Credpjyyx Imsfx Ab Uea Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Sledge path plan 260 mm centre distance 1000 / 1500 / 2000 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Codpfx Abswgn Ags Ujra Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Crjdpfor D Nmyjx Ab Usa Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Crjdeyr Si Topfx Ab Uoa Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces Cedpfx Asx H A Nbob Ujra • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: used, Year of construction: 2002, Kern 3000 envelope inserting machine. The device is in working condition, used only occasionally at a backup facility, so it requires cleaning and maintenance. Credpfx Abov D Eg Sj Uea

Condition: used, Various micrometers from different manufacturers Pos1 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos2 Manufacturer: Tesa Swiss Made Measuring range: 100 – 125 mm Scale division: 0.01 mm Pos3 Manufacturer: Unknown Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos4 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Locking screw defective Pos5 Manufacturer: Hommel Werke Measuring range: 25 – 50 mm Scale division: 0.01 mm Pos6 Manufacturer: Mahr Messtechnik Measuring range: 70 – 95 mm Scale division: 0.01 mm Pos7 Manufacturer: Tesa Measuring range: 0 – 25 mm Scale division: 0.01 mm Pos8 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos9 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos10 Manufacturer: Mahr Measuring range: 120 – 145 mm Scale division: 0.01 mm Pos11 Manufacturer: Tesa Measuring range: 75 – 100 mm Scale division: 0.01 mm Locking screw missing Pos12 Manufacturer: Mahr Measuring range: 125 – 170 mm Scale division: 0.01 mm Pos13 Manufacturer: Unknown Measuring range: 195 – 220 mm Scale division: 0.01 mm Pos14 Manufacturer: J.E. Reinecker Chemnitz Measuring range: 100–125 mm Scale division: 0.01 mm Pos15 Manufacturer: Mitutoyo Measuring range: 25–50 mm Scale division: 0.01 mm Pos16 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos17 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos18 Manufacturer: PAV Measuring range: 250–275 mm Scale division: 0.01 mm Pos19 Crodeyhmwqepfx Ab Usa Manufacturer: Hommel Werke Measuring range: 200–225 mm Scale division: 0.01 mm Pos20 Manufacturer: Mahr Measuring range: 70–95 mm Scale division: 0.01 mm Pos21 Manufacturer: Unknown Measuring range: 100–125 mm Scale division: 0.01 mm Pos22 Manufacturer: Mahr Measuring range: 45–70 mm Scale division: 0.01 mm Pos23 Manufacturer: Mahr Measuring range: 145–170 mm Scale division: 0.01 mm Pos24 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos25 Manufacturer: Mitutoyo Measuring range: 0–25 mm Scale division: 0.01 mm Pos26 Manufacturer: Kern Measuring range: 0–25 mm Scale division: 0.01 mm Pos27 Manufacturer: Mahr Measuring range: 195–220 mm Scale division: 0.01 mm Pos28 Manufacturer: Unknown Measuring range: 70–95 mm Scale division: 0.01 mm Pos29 Manufacturer: Unknown Measuring range: 25–50 mm Scale division: 0.01 mm Pos30 Manufacturer: Mitutoyo Measuring range: 25–50 mm Scale division: 0.01 mm Pos31 Manufacturer: Mahr Messtechnik Measuring range: 195–220 mm Scale division: 0.01 mm Pos32 Manufacturer: Mahr Measuring range: 220–245 mm Scale division: 0.01 mm Pos33 Manufacturer: Mahr Measuring range: 245–270 mm Scale division: 0.01 mm Pos34 Manufacturer: Mahr Measuring range: 270–295 mm Scale division: 0.01 mm Pos35 Manufacturer: Mahr Measuring range: 120–145 mm Scale division: 0.01 mm Pos36 Manufacturer: Mahr Measuring range: 145–170 mm Scale division: 0.01 mm Pos37 Manufacturer: Mahr Measuring range: 170–195 mm Scale division: 0.01 mm Pos38 Manufacturer: Steyr Measuring range: 150–175 mm Scale division: 0.01 mm Pos39 Manufacturer: Steyr Measuring range: 175–200 mm Scale division: 0.01 mm Pos40 Manufacturer: PAV Measuring range: 250–275 mm Scale division: 0.01 mm Pos41 Manufacturer: PAV Measuring range: 275–300 mm Scale division: 0.01 mm Thread micrometers – Measuring micrometers Micrometer – Micrometer screw gauge – Measuring instrument e.g. for gear measurement – External measuring instrument – Disc

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm Cedsr U Skhjpfx Ab Uora turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: excellent (used), Professional stereo microscope KERN OZT 464 from the renowned German manufacturer KERN & Sohn GmbH, designed for industrial, laboratory, electronics, and research applications. Equipped with a high-quality ODC824 digital camera (3.1 MP CMOS, USB 2.0), enabling direct image transfer to a PC – an ideal solution for documentation, inspection, and analysis. Credpjxmlfiofx Ab Uoa Technical specifications: • Microscope model: KERN OZT 464 • Type: stereo, binocular with trinocular camera port • Eyepiece: widefield WF 10x/20 mm • Magnification: approx. 7x – 45x (standard) • Illumination: adjustable LED, upper and lower • Power supply: 100–240 V, 50/60 Hz • Camera: KERN ODC824, 3.1 MP, 1/2” Aptina CMOS, USB 2.0 • Image capture and analysis software (Windows compatible) • Includes power and USB cables Condition: • Device in very good condition, fully functional • Clear and sharp image, smooth mechanical operation • Complete set with all cables, protective cover, and digital camera Applications: • Research and industrial laboratories • Quality control and metrology • Electronics servicing and micromounting • Education, science, and microscopic documentation

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Csdpfx Abswfglwj Uora Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. .