Book cover machine

Kolbus DA 270

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen Fsdpfx Aijzhwu Ejdepi - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variatio from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: ready for operation (used), Size: max 480 x 325 mm Fjdpfxjd N D Nws Aidopi Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Speed: max 14.000 c/h Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20

Condition: excellent (used), Year of construction: 2014, Ref:11081 . 2014 Kolbus DA-270 Casemaker For high-speed production of hard book covers, Lever Arch files and games boards. Comprising: ‘Co-pilot’ system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste *Special board centre strip cutting device Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit with pre-melter* Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Fsdpfeyzy Rrox Aidspi Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals. N.B. Compressed air and water supplies to client’s account. Accessories: Board centre-strip cutting device for cutting rigid centre board strips to width, with possible width variance from product to product for digital book production. ° Board sheet thickness max. 2 mm ° Width max. 1,500 mm | height min. 140 mm | max. 390 mm ° Board centre-strip max. 7 mm | max. 60 mm Kolbus ECK standalone corner cutter to work with case maker Specification: Size of opened case, Max: 670 x 390 mm Min : 205 x 140 mm Centre strip width : 6 - 90 mm, thickness 1 – 4 mm Joint width : 4 - 15 mm Turn-in width, closed : 8 – 15 mm Output, variable : up to 65 cycles/min Floor space : L: 6700 x W: 3000 x H: 2,200 mm Electrical loading : 15 kW (3ph, 400V, 50 Hz) Air requirement : 33 Nm3/h 6 bar.

Condition: used, Year of construction: 2004, Case maker Kolbus DA 270 Year: 2004 Fedpfx Aoyym Ubjidjpi Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Booklet Maker The machine is fully operational and ready for production. Very low mileage. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100m Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g Power supply: 230V Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-200A 10.4″ color touchscreen Non-stop operation thanks to the mis-assembly ejection function Max size: 508x356mm; Min size: 180x120mm Fpodpfxey Sd Suj Aidei Max speed: 4500 booklets/hour Weight: 500kg Stitching Wire-folding Two Hohner heads Up to 200 jobs can be saved in the machine’s memory. Additional options include wire feed control and a block stitching module. Horizon FC-200A Cutting thickness 4-5mm 230V power supply Weight 244 kg New trimmer design, stable operation with servo motors, and additional booklet guide. Touch panel for quick format changes. Reset the machine to a different format with a single click. The machine includes: LC-200 delivery, operating tools, spare parts, and documentation.

Year of construction: 2003, condition: good (used), Built in 2003 Size max 670x390 mm Fpodpfx Aisd Td U Dodsi min 205x140 mm Speed 3.900 c/h

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine is in very good working condition. Still in production. Test possible at any time. Fpedpfxoyux Sgj Aidsi Available immediately.

Condition: ready for operation (used), Loop stitching heads for calender hooks Fodoir A Hpepfx Aidjpi

Condition: reconditioned (used), Year of construction: 2006, Casemaker - device for processing center strip rolls Fedpfx Aev Uh Nkjidspi - processing hot-glue - viscosity control device - board center strip magazine - board cutting device PS - device for producing quarter-bound cases in 2 passes - device for processing of asymmetric cases

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt Fedpsx Ary Esfx Aidepi - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!