Door manufacturing machine

Lehbrink WL 31

Condition: new, • Working capacity 3300mm X, 200mmY, 180mm Z • 1 x vertical electro-spindle 7kw with saw • 1 x vertical electro- spindle 7kw 12 – 18000 rpm Gjdpfen Nv S Tox Afnjbh • 1 x electro-spindle kw1.7 with point to point vertical / horizontal drilling group • 1 x horizontal electro-spindle 5.6kw 12-18000 rpm • 4+4 work piece holding benches moveable on the X axis/ Each fitted with adjustable pneumatic workpiece clamps • L/H and R/H retractable work piece reference stops • Stand alone electrical control cabinet with hand held remote control for machine set up • Simple parametric programming with 3D working models • Perimeter safety cabin with front doors, vertical operation, synchronised with machine cycle

Condition: ready for operation (used), Technical characteristics Useful table dimensions : 3100 x 1500 mm Tilting table Rubber membrane 700% elasticity at break Gbsdpjt N Augofx Afnsh VENTURI vacuum with non-return valve 1kg/cm² pressure 12 mm HPL top On request : silicone diaphragm valve Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Gbedpfxjtixpuo Afneh Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Year of construction: 2015, condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Gbsdpfjcczuqjx Afnoh Press bonding framework of internal and external doors " Companies Lignum-Evert Johanson --- pneumatic-hydraulic press bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded hardware give one year warranty

Condition: used, Hydraulic wood panel gluing press NOES Specification: Model: NOES Number of pushers: 6 Motor power: 2 x 17 kW Power: 3 x 380 V Made in: Denmark Gbjdsqla H Uspfx Afnjh If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET402P3-20 - 2200371822, cooling capacity: 89.4 kW (121.55 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,701 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3.45 bar, total width: 1,260 mm, total length: 3,300 mm, total height: 2,120 mm, warranty duration: 3 months, input current: 82 A, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled chiller, Type: TAEevo Tech 402 P3-20 MTA S.p.A. TAEevo Tech 402 P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crankcase heater, phase monitoring, 500 ltr. buffer tank, built-in P3 circulation pump and condenser pressure control. Cooling capacity kW 89.4 Cold water temp. outlet/ inlet (°C): 7 / 12 Volume flow (m³/h) 15.2 Available pump pressure (bar) 3.45 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Gbsdpfx Afetk Hpnjnsh Max. Power consumption (kW) 48 Max. Current (A) 81 Starting current circuit (A) 176 Protection class: IP54 Dimensions: Length (mm) 3298, width (mm) 1255, height (mm) 2119, Weight (kg) 1728 Connection Rp 2"1/2 Serial no.: 2200371822 Year of manufacture 2021 Condition: Optically 2-3, technically OK Used Used machines may have optical defects due to their use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), Year of construction: 2012, Single-sided edgebanding machine for softforming, rebated door edges or any other softforming application Glue system with slot nozzle available for different glue Eva, PU, Poliolefina panel thickness range 10-60 mm 2 x milling unit for processing workpiece profiles IR lamps for material heating unit for applying anti-adhesive agent glue melter and glue application system with tank made by Meller, temperature and melting time electronically controlled pressure zone: revolver with heated pads or can be replaced with rollers magazine for edge banding tape front and rear cut-off units Gbodowt Uu Aepfx Afnjh bottom and top milling units for longitudinal band excess (2x top and 2x bottom) top and bottom polishing units PC control system for quick, easy and precise setting of the main machine functions including aggregates

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Machine type: machining center Gbsdpfxjx Nw Drj Afneh If you have any questions or need more information, please feel free to send us a message or give us a call.

Year of construction: 2010, condition: excellent (used), 306- Compressor Compair C 38, year 2010, operating hours 144, ser.no. WCA1C2807A1A40135, volume flow: 3,8 m³, ABE and KFZ-Brief available, TÜV 12.2022, car and truck towing device, 4 cylinders Cummins Diesel, operating pressure adjustable 7-10 Bar Gsdpfx Afoibhwyenobh

Condition: good (used), machine/vehicle number: 2845, Year of construction: 1999, SISU 20-40” from Uniktruck Gbedpfxsqxc Udj Afnoh