LINCK VZM & CSMA

LINCK VZM & CSMA

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Bwedpfx Afegwqk Setji Conveyors system between the machines included.

Condition: used, CPM 9042-12 granulator with many spare parts Bwedpfx Afsw Saaystei

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. Bwsdpfx Ajwp Rqfsftoi The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 1996, condition: ready for operation (used), Working width: 2300mm, max. roll diameter: 1500mm, working speed: 180m/min, including crane track and longitudinal cutting system, shaft, belt and wiring overhauled. Bwodpfx Asd Hr Uzeftoi

Condition: good (used), Year of construction: 2000, functionality: fully functional, Cambio 500 debarking line consisting of: Infeed centering. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Outfeed control unit. Tilting trough for long timber. Bwsdpfewxdimox Aftoi Spare parts.

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Bwedpfsl Sli Djx Aftji

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar Bjdpfsrzq Arex Aftjwi PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Year of construction: 2026, condition: new, power: 200 kW (271.92 HP), ⚡ Processing Capacity & Specifications ✔️ Capacity: Up to 1300 kg/h ✔️ Total Power: 200 kW ✔️ Footprint: 120 m² Perfect for high-capacity, continuous 24/7 production. 🔁 Applicable Materials ✔️ Building, installation, flexible, and appliance cables ✔️ Communication, data, electronic, and low-grade cables ✔️ Automotive, harness, and all types of mixed copper cables ✔️ Industrial, armoured, and contaminated/difficult cables 🔍 Included Machines & Functions - Shredder (SSH): Pre-shredding and size reduction - Overbelt Magnetic Separator (OMS): Removes ferrous metals - Granulator (FGR): Refines particles for efficient separation - Zigzag Separator (ZZS): Air separation of light and heavy fractions - Turbo Mill (TRM): Ultra-fine grinding for maximum liberation - Densimetric Separator (DES): Precise density-based separation - Dust Collector (DTF): Ensures a clean and dust-free environment 🔄 Key Advantages Bwjdpowkflgsfx Aftsi - High Purity Output: Achieves 99.9% copper purity via multi-stage separation. - Efficiency & Automation: Fully automatic operation with minimal labour and low total cost of ownership (energy & maintenance). - Operational Reliability: Continuous feeding system without process fluctuation, ensuring high uptime. - Smart Design: Modular, maintenance-friendly architecture with PLC-controlled automation and real-time monitoring. - Compliance & Safety: CE-compliant, vibration-optimised, sound-reduced, and dust-controlled operation. 🎯 Designed For - Recycling businesses aiming for fast ROI through high metal recovery. - Operators requiring stable output quality even with mixed cable inputs. - Companies seeking efficient, low-energy, and durable turnkey solutions

Condition: new, TECHNICAL DATA Bwsdpofbgz Iefx Aftji Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, Corner cutting module Bsdpsuxn H Ijfx Aftowi with its electrical panel