Sewing Machine

Müller Martini FK III

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data Iiodpfxjuf Sy Ae Ad Rjb - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm Iedpfxjd Eg Tus Ad Rjib min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: used, Year of construction: 1998, Falzmaschine / Folding machine Heidelberg TD66/6-4-2 Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Iisdpfx Adjuhiqqo Rsb Press Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles - anti-noise-hood - center control-station for all functions - standard delivery - compressor - tools, technical documentation Price on request ,-- / FCA ex DK Iedpfx Asw I S Eyed Rsib Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Isdpexpv Adofx Ad Roib Trim size: max. 20 mm Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Weight: approx. 240 kg

Condition: used, machine/vehicle number: 316383, Pappschere - Board Cutter Krause PS 120 Serial-No. 316383 Schnittbreite / Cutting width max. 1200mm Vorderanschlag und Schmalschneider / front gauge and narrow-cut device Anlegeleiste hierauf verschiebbare Winkelanlage / movable angle support Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Iisdpfxeup Eits Ad Rsb On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2007, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2007 Gathering machine: Raccoglitrice MX - Number of gathering stations: 18 - Optical sheet control - Pump(s) - Distribution unit - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 2007 Iiodpst Sz T Hjfx Ad Rob - Colour monitor - Pre-loader - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Sewing machine (2) Meccanotecnica Aster 2000 Year: 2005 - Pre-loader - Optical sheet control (BAK) - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Isdpfx Adshx Elfo Roib Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: excellent (used), Year of construction: 2009, operating hours: 56 h, 6. The tower is empty This machine can be used either as a standard 5-color printing press or as a 4-color printing press with coating. The 5th tower offers both options – a fully functional chamber doctor blade coating system (TRESU) and a fully functional color printing unit. RCI remote control for color and register (side and circumferential) Rolandmatic film dampening system with recirculation and cooling EPL Ergonomic Plate Loading automatic ink roller washing device automatic blanket and impression cylinder washing device Grafix Digital 3000 powder spray unit Grafix Select Dryer IR dryer extended high-pile delivery Iiodpfx Aoy Ndpzod Rjb standard accessories excellent condition, well maintained, only 56 million impressions

Condition: good (used), Year of construction: 2008, Straight Machine PQC-S Console PDCS II: Print Density Control KMS 4 - Komori Monitoring System KHS -AL: Pre-Inking System Skeleton Transfer Cylinders Komorimatic Dampening Unit FAPC: Fully Automatic Plate Change AMR (Automatic-Make-Ready) Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Technotrans Beta C. Combi Ink Temperature Control Coating System Tresu with Doctor Chamber Blade Baldwin Graphiset GS4 IR Dryer Grafix Megatronic-S: Powder Sprayer Powder Exhauster Grafix Ijdpfxey Hw A Ne Ad Reib Non-stop Delivery Watercooled Press Automatic Paper Size Adjustment Extended Delivery (2000mm) Impression Account: 150 Mio.