Anvil with round and rectangular horn, standard anvil, Bohemian pattern

190

Condition: used, Year of construction: 2021, operating hours: 4,056 h, Drive: Wheel Empty weight: 19.000 kg Digging depth: 5.725 m = Additional options and accessories = Gbjdpeyzcdzsfx Aa Aek - Digger blade

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system External dimensions: Height 9,500 mm Width 2,200 mm Depth 2,700 mm 58 beams, each with a payload of 190 kg with clear usable dimensions: W = 1,850 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the access opening 900 mm above the top floor, then 850 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surfaces cleaned, signs of wear possible Gbsdpfx Aodnlkhoa Ajk Performance data Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.25 kW / 400 volts More Extras: Manual lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Year of construction: 2022, condition: used, Westtech Woodcracker CL190 Available immediately Year of manufacture: 2022 - Cutting diameter softwood (mm): 250 - Cutting diameter hardwood (mm): 190 Gsdpeyfpmpefx Aa Aobk - Gripper opening = shear opening (mm): 685 - Own weight (basic – fully equipped) (kg): 210 – 310 - Recommended oil flow main circuit (l/min): 40-80 - Recommended operating pressure main circuit (bar): 250 - Recommended oil flow auxiliary circuit (l/min): 20-30 - Recommended operating pressure auxiliary circuit (bar): 200 - Carrier vehicle operating weight (t): 2.5 – 7.5 - Optional: Autospeed - Optional: Accumulation gripper - Optional: Cylinder slewing drive: 2 x 40° Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are the official distribution and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz service, Iveco service, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: good (used), mileage: 299,000 km, fuel type: diesel, maximum load weight: 5,025 kg, overall weight: 11,990 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), full service history, power assisted steering, tachograph, traction control, Purchased and serviced at an Iveco authorized service center, one owner, full documentation Body with side panels, galvanized, reinforced, oversize load plates Side panels and posts can be removed – year 2018 – mileage 299 000 km – power 190 KM – max allowed weight 11990 kg – load capacity 5025 kg – body dimensions (L x W) 7.5m x 2.48m – wheelbase 5.1m Godpjy Afw Tofx Aa Ajbk Truck is equipped with: automatic gearbox rear air suspension air conditioning lane keeping assists hill start assist If you have more questions, feel free to contact us by phone or whatsapp

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD display/control panel 1 Gbedjwwucuspfx Aa Aok Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

Condition: used, mileage: 166,966 km, power: 180 kW (244.73 HP), first registration: 10/2001, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: black, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2001, Equipment: ABS, EBS, airbag, crane, differential lock, electronic stability program (ESP), fog lights, traction control, = Additional Options and Accessories = - Rear work lights - Front work lights - Leaf spring suspension - Power brake booster - Combination lights - Roof cover - Clear view mast Gbedpfx Aex A Erusa Ajk - High beam - Windscreen - Enclosed cab - Roof lights - Cabin - Beacons - Air suspension - Air-suspended seats - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sun visor - Automatic heating - Toolbox - Power take-off (PTO) - Power take-off (PTO) = Further Information = Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Suspension: Leaf spring Rear axle: Tire size: 295/80R22.5; Twin tires; Max. axle load: 11,500 kg; Suspension: Air suspension Weights Unladen weight: 9,520 kg Payload: 9,480 kg Gross vehicle weight: 19,000 kg Functional Mast: Telescopic (3 sections) Mast length: 7.5 m Lifting capacity: 4,000 kg Body manufacturer: HIAB 085 Financial Information Price: On request Identification Registration number: BL-HP-62

Condition: used, mileage: 161,902 km, power: 200 kW (271.92 HP), first registration: 12/2014, fuel type: gas, overall weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, loading space length: 6,350 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, soot filter, tail-lift, 2-seater, power steering, 8-speed manual transmission, electric windows, electric exterior mirrors, heated exterior mirrors, onboard computer, Euro 6, radio-CD, air conditioning, Waeco reversing camera, rear air suspension, Carrier Supra 1000Mt refrigeration unit, power connection, rear swing doors, right-side door, Dhollandia tail lift, errors/intermediate sale/typographical errors excepted. Sale only to traders and for export. Fg-300754! Key no. 186! Test/inspection drive to Dekra, Tüv, or Iveco possible! New Tüv on request! Gsdpsx Iaizjfx Aa Asbk

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm Gbedpfxsqwlmqo Aa Ajk turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: used, mileage: 384,885 km, power: 228 kW (309.99 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 9,755 kg, maximum load weight: 8,245 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,700 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 52 m³, loading space length: 8,150 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Equipment: air conditioning, cruise control, tail-lift, Tare: 9755kg, Permissible total weight: 18000kg, Cargo space (L W H): 8150 mm x 2480 mm x 2600 mm, Cargo space volume: 52 m³, Air leaf spring suspension, Tail lift, Digital tachograph, Electronic brake system EBS, Brake assistant, Electronic stability program ESP, Adaptive cruise control, Comfortable driver seat, Pneumatic driver seat, Driver's armrest, Radio/CD, Bluetooth mobile phone preparation, Lane keeping warning, Roof spoiler, Electric and heated rear view mirrors, Immobilizer, Central locking with remote control, Underrun protection: Front, Twin tyres, Spare wheel, Axle load indicator, Hill start control, LED daytime running lights, Telematics system, Speed limiter, Emergency brake assistant Gedpfxer Ap Sye Aa Asbk

Condition: used, Travel: 260x160x180mm Work-place: 600x900mm Complete with belongings - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gjdpfx Aox Igc Uoa Aebk Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Anvil with base -LxWxH: 1000x350x360 mm (anvil dimensions) Gbedpfx Asx N Ew Tea Aek -Weight approx. 300 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2018, KONICA MINOLTA ACCURIOLABEL 190 Year of Manufacture: 2018 _____ Machine Specifications and Equipment:  Total Print Count: ONLY 0.4 million  Web width: 330 mm  Print Speed: Up to 60 ppm  Resolution: 1200 x 1200 dpi  Paper Formats: A6 - SRA3, custom sizes  Duplex Printing: Yes  Connectivity: USB, Ethernet  Toner System: Simitri HD polymerized toner  All spare parts replaced by KONICA MINOLTA GERMANY – like new. Gbsdjyz Ac Dopfx Aa Ask

Condition: used, mileage: 730,586 km, power: 420 kW (571.04 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 11,100 kg, maximum load weight: 6,900 kg, overall weight: 40,000 kg, tire size: 385 / 55 R 22.5 / 5mm, axle configuration: 4x2, wheelbase: 5,100 mm, next inspection (TÜV): 10/2024, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 9,300 mm, total width: 25,500 mm, total height: 39,000 mm, front tire size: 385 / 55 R 22.5 / 5mm, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: as good as new (ex-display), The Numturn S 560/1500 is a state-of-the-art CNC Flat Bed Lathe designed for the Lathes category, offering high performance for large workpieces. This machine boasts a robust box-way design that ensures maximum precision while facilitating heavy machining tasks. Its powerful Siemens servo motor drives the main spindle through a 4-step transmission, allowing for infinitely variable spindle speeds and high torque across various speeds. Equipped with an 8-station VDI tool changer, the Numturn S 560/1500 maximizes productivity and flexibility in operations. The user-friendly Siemens 828D control enables quick setup through two electronic hand-wheels, resembling manual lathe operation for enhanced user experience. With a hydraulic tailstock featuring high clamping force and a reliable automatic central lubrication system, maintenance is efficient and straightforward. For those looking to enhance their productivity, the Numturn S 560/1500 represents an excellent solution in CNC Flat Bed Lathes. To learn more about this machine or to request a quote, don’t hesitate to contact us. Gjdpfx Aajuyg Ers Aobk

Condition: used, mileage: 620,454 km, power: 420 kW (571.04 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 10,700 kg, maximum load weight: 7,300 kg, overall weight: 40,000 kg, tire size: 385/55 R 22.5 /5mm, axle configuration: 4x2, wheelbase: 5,500 mm, next inspection (TÜV): 11/2023, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,900 mm, total width: 25,500 mm, total height: 37,000 mm, front tire size: 385/55 R 22.5 /5mm, operation weight: 18,000 kg, Equipment: air conditioning,