Used Generator - Emergency Generator for sale (13,585)

Year of construction: 1977, condition: good (used), 2 pieces DDR emergency power generators Engine manufacturer: VEB SKL Magdeburg GDR Type: 8NVD26 A2 year of construction: 1977 continuous power: 294 kW max. line: 323 kW displacement: 52,96 liters compression ratio: 14 engine speed: 750 rpm specific fuel consumption: 224 g/kwh fuel consumption in 8 hours:640 liters boost pressure ratio: 1.38 charge air temperature after supercharger: 60°C Generator: Manufacturer: VEM Dessau Type SSED 509-8a voltage 400 volt electrical power: 330 kVA cos. F: 0,8 Lajdpfx Akjigyt Hj Dja Dimensions: Length 4270 mm, width 1516 mm, height 2030 mm. Total weight approx. 8500 kg per piece !! Further information exclusively by telephone !!!

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for Laedpfxjvyp H Uj Ak Dsa annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: excellent (used), Year of construction: 2017, operating hours: 25 h, functionality: fully functional, overall weight: 2,300 kg, fuel type: diesel, continuous power (apparent): 126 kVA, For sale an emergency power generator suitable for factories, a powerful 126kVA power will power many devices and machines. IVECO engine after a general check, replaced oils, filters, fully functional. Mecc Alte power generator producing up to 126kVA, this generator was connected in one hall and used only once for 3 hours! We are also able to make a generator body and deliver it to the specified address! More information from the seller. Automatic operation system: Thanks to the built-in ATS system, the generator is in "standby" mode and is constantly ready to start automatically when the power goes out in the network. The principle of operation is simple, after a specified time from the moment of the power outage, the generator will turn on by itself, while when the power returns, the generator will turn off, restoring the power from the network. A solution that will work great in gastronomy, offices, manufacturing companies - everywhere where the generator is an emergency source of energy. Additional advantages include a) maintenance-free b) no interference in the operation of the generator by third parties c) the fastest possible restoration of energy in the facility ✔ Automatic battery charging ✔ Start-up reliability ✔ Possible connection in single-phase and three-phase installations ✔ Mechanical lock Mecc alte 126 kVA = 101 KW AC generator Manufacturer: English Mecc alte Model: ECP 24 2S4 Fuel: Diesel Year of production: 2017 - but never used. Serial number: 0002006067 Meter setting: 10 M/h Weight (kg): 2300 IP: 23 Power: 126kVA CE marking: Yes Laedpfov Rbt Ujx Ak Dsa Measurements: Length (m): 2.3 m Width (m): 0.8 m Height (m): 1.6 m Note The price given is in net value and is valid for Export and for companies. A large discount is possible for individual customers - We invite you to contact us directly by phone to get your best price :) ————— After price negotiations, we are able to record a detailed video (for a determined customer) or perform a computer test or paint meter test, so as to ensure comfortable conditions for purchasing equipment remotely. —————- Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe transaction. Additionally, the possibility of obtaining a technical guarantee with Assistance without a km limit. ————— THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN THE MEANING OF ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE ANNOUNCEMENT.

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Lodov Uag Ijpfx Ak Doaa

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Lajdpsyl Nntofx Ak Dja

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Lsdpfx Aex U Tgmsk Deaa The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Lajdpsxfrv Eefx Ak Doa Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Lasdsw U N Daopfx Ak Dja

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: Lsdpfx Akjruakgo Deaa B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Laodpoxaqa Sefx Ak Dea Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Ljdpfjxdfazox Ak Djaa Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Laodpjxdfa Uefx Ak Doa Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Lsdpfxjrtryko Ak Dsaa Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen. Ljdpeyt Rc Iofx Ak Dsaa

Condition: good (used), Year of construction: 2014, operating hours: 246 h, functionality: limited functionality, overall weight: 3,000 kg, fuel type: diesel, color: green, power: 176 kW (239.29 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 176 kW (239.29 HP), nominal power (apparent): 220 kVA, continuous power: 163 kW (221.62 HP), continuous power (apparent): 203 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo mPenta, type of cooling: water, Brand: Pramac Model: GSW220V Lodpfx Akey A Iuus Deaa Year of manufacture: 2014 Serial number: PEE2563417 Operating hours (read): 246 Capacity (kVA): 220 - 202.8 Capacity (kW): 176 - 162.2 Engine brand: Volvo Penta Engine model: TAD733GE Fuel: Diesel Alternator brand: Mecc Alte Alternator model: Eco38 2S Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 317.6 Dimensions LxWxH (mm): 2650 x 1180 x 2450 Weight (kg) approx.: 3000 Units in stock: 1 Made in: Spain Comments: Ex-emergency set in good condition

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min Ledpfoyh Rmmex Ak Doaa working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Lsdpot S Ny Usfx Ak Dsaa Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container

Condition: used, Year of construction: 1992, SCANIA DS9 56 engine - variant A20T Ledpjtphzdsfx Ak Deaa LEROY SOMER generator LSA 46M3S 140 kW / 175 kVA / 400 V / 1500 rpm

Condition: used, functionality: fully functional, Working area: approx. 800 x 4,000 mm multi-stage pre-screen bar grate drive 2 x 4 kW VIMARC Lajdpfx Aksw Dzwfs Dsa with steel construction and feed hopper

Condition: used, Year of construction: 2023, operating hours: 8,973 h, machine/vehicle number: ESF372667, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Generator capacity: 40 kVA Lajdpfx Akoyz Iyuo Dea Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: used, This listing is for a Bioquell Clarus L Hydrogen Peroxide Vapour (VHP) Generator. The unit is in full working condition and ready for immediate use. A mobile system designed for surface bio-decontamination of labs, isolators, and equipment, providing 6-log sporicidal reduction Ljdpfx Aoy D T Ngjk Deaa

Condition: like new (used), Year of construction: 2011, operating hours: 36 h, machine/vehicle number: 02573550-060, color: green, power: 310 kW (421.48 HP), output frequency: 50 Hz, nominal power (apparent): 345 kVA, Used Diesel Generator – Cummins | 352 HP / 263 kW Standby | Enclosed | With Fuel Tank Technical Specifications: Engine Brand: Cummins Engine Model: QSL9-G5 Standby Power: 352 HP /263 kW at 1800 rpm Prime Power: ~310 HP / 231 kW at 1500 rpm Laodpowzirxsfx Ak Dsa Voltage: 400/231 V Frequency: 50 Hz RPM: 1500 Fuel Type: Diesel Cooling: Liquid-cooled Control Panel: Included Fuel Tank: Integrated base frame fuel tank (visible on photos) Condition: Used – very good visual and operational condition Soundproof Enclosure: Yes Manufacturing Label: Frame code 4A9A145639

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Laedpexb D Hbjfx Ak Dsa Excellent working condition 📍 Location: England

Condition: used, Year of construction: 2023, operating hours: 12,298 h, machine/vehicle number: ESF372638, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Laedpfx Aoyzl Hxok Dja Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg Ledpfxsy Emwys Ak Doaa EQUIPMENT CE marking Suitable with ATS switching system for mains takeover