Used Fmc Finisher for sale (3,064)

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under power by appointment. Including Felsomat FZ250 Loading system Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Crjdpfexwdwlex Anwob Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2021, operating hours: 2,725 h, 2021 Rösler Model RHBD 13/18T Overhead Conveyor Shot Blasting System (only 2725 hours) Credpfx Anjy Am Dujwsb 3 Part System. Modern, High-Performance Overhead Conveyor Shot Blasting System Designed For Continuous Surface Treatment Of Medium To Heavy Components. Suitable For Cleaning, Descaling And Surface Preparation Prior To Coating. The System Was Used For Blasting Magnesium Die-Cast Components. With The Same Blasting Media, The System Can Also Be Used For Aluminium Die-Casting Or Aluminium Casting, Brass Casting, E.G, Fittings. The Blast Cabinet Has Four Blast Turbines With Automatic Abrasive Recirculation For Continuous Use Of The Blasting Media. The System Has A Wet Separator. The Overhead Conveyor System Has 18 Rotating Stations To Which 18 Workpiece Carriers Can Be Attached. There Are 14 Stainless Steel Workpiece Carriers On Which Components Can Be Hung. Operating Hours: 2,725. Rated Power: 135 Kw/400v. 6 Blast Wheel Turbine. Rated Speed Per Turbine: 2,500 Rpm. Rated Blast Media Quantity Per Turbine 45Kg. With Circulating Overhead Conveyor, Including Workpiece Carrier, With Wet Filter System. Control System Siemens Simatic HMI. S/No.96410 (2021) Overhead Conveyor Steel System Model RHBD. Shot Turbines Gamma. Gate Width 1,300mm, Gate Height 1,800mm. Pneumatic Gate Operation, 4 Gate Leaves. Safety Monitoring, Swivel Field Gate. Lifting/Lowering Device For Hooks. Wear Protection Plates 10mm Against Turbines And Ceiling. Wall Thickness Of Blasting Chamber 8mm. Filter System 4,000 M³/H. Wet Separator Type RF 800 NS, No. 96411. Conveyor System Freely Configurable. Maximum Hook Load Per Suspension 1,000kg. Workpiece Carriers In The Blasting Cabin Automatically Rotating, Freely Configurable. Recommended Diameter Of Hanging Workpiece Carriers 1,100mm. Recommended Height Of Hanging Workpiece Carriers 1,600mm. 14 Goods Carriers With A Diameter Of 1,000mm And A Height Of 1,450mm Available. Abrasive Return Via Linear Conveyor System And Elevator Conveyor Into The Feed Hopper. Abrasive Supply To The Blast Turbines Through Screw Distributors With Adjustable Abrasive Quantity. Occupational Safety And Explosion Protection Report For Magnesium Processing Available. Dimensions Of The Blast Cabinet Approximately: Width 2,800mm, Length Approximately 10,500mm, Height Approximately 3,500mm. Please Note The Machine Was Dismantled In August 2025.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C5200S colour production system. Item for sale: 1 x Ricoh Pro C5200S with the following features: Includes staple finisher Not the right configuration for you? We can easily configure the machine to your specifications. Please contact us for more information! Meter readings: Total: Approx. 729,313 pages Colour: Approx. 498,989 pages Black: Approx. 230,324 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. Crsdpfxoxnx Dbe Anwjb For more information, please feel free to contact us personally.

Condition: ready for operation (used), Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Cedpfxoyycc Ie Anwerb Type: VBT 2E 650 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2005 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm

Condition: used, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,200 mm, spindle speed (max.): 3,000 rpm, feed rate X-axis: 15 m/min, table length: 2,000 mm, table width: 1,600 mm, quill diameter: 130 mm, spindle stroke: 800 mm, CNC HEIDENHAIN Tool changer with 40 positions Equipped with automatic tilting head Complete overhaul of RAM and spindle Cedpsy A Rudofx Anwsrb

Condition: used, functionality: fully functional, rotational speed (max.): 800 rpm, inner dimension width: 400 mm, Rösler HTZ 400 drying centrifuge incl. heating fan, stepless speed control Crodpfx Asy Ap E Uonwjb 2 units for sale No. 1 - Year 2016 No. 2 - Year 2011 - 7552 hours The Rösler centrifuges of the HTZ series are ideally suited for spotless drying of small parts, while preventing any mixing of workpieces.

Year of construction: 2024, condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock and ready for shipping Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° Codpfshlkqpex Anwerb - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length Cedpfx Ajiv Imnsnwjrb - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Year of construction: 2011, condition: good (used), Heated surfacefinishing machine for Zink-magnesium coating Crjdpjfndpnofx Anweb Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Crodpsyuubdofx Anwjb Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1992, functionality: limited functionality, Paint booth as shown in the pictures for sale, including crane runway as visible in the images. If dismantled by the buyer, price is negotiable. Crjdpfoy Aldasx Anwsb

Condition: ready for operation (used), WALTHER TROWAL Type CA 650 incl. centrifuge -Drum diameter: 1600 mm -Coating in good condition -Speed: 1450 rpm -Timer -Centrifuge Crsdpsyz Sitsfx Anwob -Soundproof cover -Working platform -Power: 11 kW Subject to errors and omissions.

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Credsy Ai Ehjpfx Anwsb Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: like new (used), These machines are used in the food industry to process fruit and vegetables, separating the pulp from skins, seeds, and other waste. The machine is primarily used as a juice and purée extractor. It is also used to remove seeds and pulp from juice extracted by other machines. The extractor offers a high production capacity, which varies depending on the following factors: type of product (citrus fruits, pomegranates, tomatoes, etc.), condition of the product, and type of processing the product has already undergone. In general, the 'Finisher' extractor offers the following advantages: - Production of clearer juices (from mixtures of pulp, seeds, and skins) due to the lower solids content compared to crushing processes. - Prevention of aeration in the extracted juice. - Achieving the lowest possible moisture content in the waste. WORKING MEASUREMENTS: Mesh length: 60.5 cm Crsdpfx Ajyz Ttmjnwsb * Output may vary depending on the product.

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. Crjdpfxeh Nnbco Anwsb * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm Cedpfx Ajyu S D Asnworb SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: good (used), functionality: fully functional, With this offer, you are purchasing a used Konica Minolta AccurioPress C3080 colour production system. Item for sale: 1 x Konica Minolta AccurioPress C3080 with the following equipment: Includes Intelligent Quality Care Unit IQ-501 Includes Paper Deck PF-707m Includes Booklet Finisher FS-513 Includes feeding unit Csdpfxexzn H Se Anwjrb Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 1,783,104 pages Colour: approx. 1,342,253 pages Black: approx. 440,808 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: excellent (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C165’ Object of sale: 1 x Canon imagePRESS C165 with the following equipment: incl. Staplefinisher W1 Pro Crjdpfewkqxxjx Anweb Not the right equipment? It is no problem to configure the machine according to your wishes. Please contact us! Counter readings: Total: Approx. 80,775 pages Colour: Approx. 53,342 pages Black: Approx. 27,433 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Canon imagePRESS C9010 VP’ Object of sale: 1 x Canon imagePRESS C9010 VP with the following equipment: incl. Prisma Controller or Fiery incl. booklet finisher N2 incl. High Capacity Stacker H-1 incl. POD Deck D1 Counter readings: Cedpeu Ecl Ejfx Anwjrb Total: Approx. 1,880,920 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) Crodpfx Ajyrr Rqsnwob - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Year of construction: 2013, condition: used, Technical details: Credpfx Ansixl Ahowsb swing diameter: 80 mm workpiece length: 450 mm weight of the machine ca.: 3500 kg

Condition: excellent (used), Year of construction: 2008, Top finish brushing machine Italmeccanica TOP FINISH 6T -2M brushing machine one horizontal shaft two edge pin two rotary Codpsk Iu Hvjfx Anworb

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M28L/7640, Offer Number: M28L/7640 Machinetype: finishing lathe Info: vibratory feeder Make: RORSCHACH Type: GF3 Constr. year: 1977 diameter range: 3,5-10 mm total screw length: 150 mm output - pieces/min: 28 head dia.: 24 mm max. Location: In our warehouse Credpfx Anjwi S Skowob

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Cedpfx Ansyx Irljwsrb Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal Crjdoyguz Uepfx Anwob • Tool magazine: 30 positions Technical Specification Taper Size ISO 50