Super Finishing Machine

SUPFINA 622/1

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Lsdelrt Saspfx Akqoru Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Located at [location] for self-dismantling Dismantling and loading can be offered as an option.

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. Lodpou Ngybofx Akqeru *

Condition: refurbished (used), CN Centerless grinding machine ROSSI MONZA 1500 CN currently being overhauled and fully electrically/electronically retrofitted Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing Grinding wheel 350 mm * 610 mm dia This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 350 Grinding wheel diameter: 600 CNC: Siemens Ledpfx Aksmmqiroqjru

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Ledpfx Aouz If Nokqeru Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t Ledpfxsuddgfs Akqjru 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Lodpoy Dg Euefx Akqoru Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: 400x500x300 cm +/- 5.000 kg

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm Lodpfx Akox Enapjqjru • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Lodpezwd Hgofx Akqoru Additional Capabilities: - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 190840, Year of construction: 2019, load capacity: 600 kg, fuel type: electric, battery capacity: 96 Ah, battery voltage: 24 V, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), empty load weight: 131 kg, Zallys JESPI platform truck, year of manufacture 2019 Data: Zallys JESPI Year of manufacture: 2019 Operating hours (h): No counter Load capacity (kg): 600 Weight (kg): 131 Front tires: Pneumatic Rear tires: Pneumatic Battery year of manufacture: 2019 Battery capacity (Ah): 96 Battery voltage (V): 24 (2 x 12 V) Accessories: Charger Operating manual Note: Loading platform is tiltable. Motor power: 1 kW Max. speed: 5 km/h Loading platform: L: 1200 mm x W: 850 mm x H: 200 mm Device: L: 1750 mm x W: 880 mm x H: 1270 mm Lrsdpfx Aozc Nq Nokqou

Condition: used, Grinding wheel dimensions (od x id x width) Ø 650 x Ø 304.8 x 500mm Min/max diameter to be ground 3 / 200 mm Width of regulating wheel 500 mm Number of regulating wheel speeds Infinite Min/max speed of regulating wheel (r.p.m.) 10 / 255 r.p.m. Diamond dressing (auto/manual) Automatic longitudinal, manual penetration for both wheels Lsdpfx Akoix N Enoqjru Diamond dressing speed 255 r.p.m. Number of CNC axes 1 Regulating wheel dimensions (od x id x width) Ø 350 x Ø 203.2 x 500mm Width of grinding wheel 500 mm Maximum length to be ground in plunge grinding 500 mm Power of grinding wheel head motor 55 Kw Power of hydraulic motor 3 Kw Total power 60 Kw Voltage 220/380V Length 2,300 mm Width 2,800 mm Height 2,100 mm Weight 15,000 Kg