Used Zopf T200 for sale (289)

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table Laedsdk H A Ijpfx Ak Dja - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 Lodpfx Aodibygek Dsaa - demo model - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm Lasdpod A Nb Hofx Ak Doa -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: new, Year of construction: 2023, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 ° Laodpfx Akedkxkxs Dea

Condition: refurbished (used), Lathe for iron and metalworking Lasdsy D Sunjpfx Ak Dsa Nosotti brand T200/1500 model accessories how to take photo

Year of construction: 2008, condition: used, Tray Sealing Machine – MULTIVAC T200 Manufacturer: MULTIVAC Model: T200 Machine type: Semi-automatic tray sealing machine Description The MULTIVAC T200 is a compact semi-automatic tray sealer designed for professional food packaging applications. The machine seals pre-formed trays with film, providing secure and hygienic packaging for a wide range of food products. The T200 is known for its reliability, simple operation, and compact design, making it ideal for small to medium production environments. Technical Specifications - Manufacturer: MULTIVAC - Model: T200 - Machine type: Semi-automatic tray sealer Ljdpfoyt I Hdsx Ak Doaa - Packaging type: Pre-formed trays with sealing film - Operation: Manual loading with automatic sealing cycle - Construction: Stainless steel hygienic design - Control: Digital control panel Key Features - Compact tabletop tray sealing machine - Suitable for various tray sizes (tooling dependent) - Easy to operate and maintain - Hygienic stainless steel construction - Ideal for small and medium production runs Applications - Ready meal packaging - Meat, poultry, and fish packaging - Cheese and dairy products - Fresh food and convenience products Condition Used Manufacturer: MULTIVAC Model: T200

Year of construction: 2014, condition: excellent (used), 1,0 St. Trockenlufttrockener mit Material- förderer, als Singlelösung, auf Rollen Hersteller: SOMOS / Mann + Hummel mit Fördergerät Typ: T200 MC2 Baujahr: 2014 Lsdpfjiq Ng Rex Ak Dsaa Inhalt Trichter: 20 Liter Trichter: Edelstahl Trockenluftmenge: 200 m³/h Trockenlufttemperatur: max. 200° C

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending machine - Model T 200 with stop - feeding machine - stroke length 185 mm - Weight 500 kg Lsdpfxexyy Ave Ak Dsaa Bending capacity up to flat bars ST 37 is 200x12 mm (with appropriate tool) with punch R 5 and die V 100 mm

Condition: ready for operation (used), type of input current: three-phase, spindle diameter: 35 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,200 rpm, table width: 245 mm, table length: 1,110 mm, total length: 1,150 mm, total width: 900 mm, total height: 890 mm, Good morning, We offer for sale a spindle moulder with bottom spindle, manufactured by GRIGGIO, model T2000. Here are a few useful details about the machine: * Spindle diameter: 35 mm (option to change to 30 mm for an additional 1,500 PLN) * Motor power: 4 kW Lajdpfxorfaxxj Ak Dja * Star-delta motor starter * Left/right spindle rotation * 5 spindle speeds adjustable by belt: 3/4.4/6/7/10 thousand rpm * Manual up/down adjustment * Foot brake and foot spindle lock * Longitudinal sliding table, e.g. for tenoning, dimensions: 24.5 x 111 cm * Original paintwork * Overall dimensions: 115 x 90 x 89 cm (L x W x H) This machine has been in regular use in a joinery workshop and shows acceptable signs of use, but it has undergone a comprehensive and rigorous inspection at our facility to eliminate any potential faults. This guarantees that the machine is fully operational, requires absolutely no further investment, and is ready for immediate use in your workshop.

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Ljdpfxsgkgwfs Ak Djaa Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: good (used), Welding rotary table Protec KT 2000 A Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° with hand and foot remote control Height horizontal 1200mm Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm Lodpfopdqfrjx Ak Deaa

Condition: good (used), Year of construction: 2009, In different assemblies, several parts. Interface Module Panel Manufacturer. SIEMENS S7 Typ: X1 Profibus-DP ET200S Panel consist of the following pieces: 1 - X1 Profibus-DP ET200S 1 - IM 151-1Standard 6ES7-151-1AA04-0AB0 1 - PM-E 6ES7 138-4CA01-0AA0 4 - 4DI 6ES7 131-4BD01-0AA0 3 - 4DO 6ES7 132-4BD01-0AA0 1 - 1SI 6ES7 138-4DF01-0AB0 Ledpfxsgblhvj Ak Djaa

Condition: new, Year of construction: 2025, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter ⦁ Suitable for all standard materials ⦁ Designed for pipes and profiles Lasdpfxox Irvms Ak Dsa - Operation via eccentric lever - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm - Weight 200 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Lasdswc Rk Ejpfx Ak Dja Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Ljdpfx Akjx A Hfvs Djaa Max feed speed: 40 m/min

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Lasdpfxec Snvfj Ak Dea Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: Laodpeyvfhdofx Ak Doa - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: used, Year of construction: 1990, operating hours: 7,248 h, total length: 3,000 mm, total width: 1,400 mm, total height: 2,200 mm, Weight: 3.450 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: ITPS 050 20 P00356 - Operating hours: 7248 - Drive system: CNC - Power [kW]: 6.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2000 - Column gap [mm]: 1730 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 105 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3000mm x 1400mm x 2200mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ljdpfx Akey Dcpvj Dsaa Lukas van Rossum

Condition: good (used), Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning Ljdpfx Aoy Eg T Ujk Djaa N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating system – Programming of manual and automatic anuba inserting – Inserting of single, anuba – Step by step execution Installed electrical power 7,62 Kw Compressed air 6-7 atm Machine Overall dimensions m 4400 x 1600 x 1600 h Weight kg 1650 Electrical cabinet overall dimensions mm 1050 x 550 x 1100 h Weight kg 390

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, MAZAK QUICK TURN SMART 200M 500U Max. turning diameter: 360 mm Max. turning length: 532 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Lajdpoy D Awtsfx Ak Dja Machine is equipped with: - Mazatrol Smart CNC control - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar feeder - automatic parts catcher - NC tailstock - high-capacity coolant pump - chip conveyor, side ejection - 8 static tool holders - 2 driven tool holders

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, Technical Data Clamping Unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum daylight: 900 mm Opening stroke: 500 mm Rotary table diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical Data Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 Nm Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions LxWxH: 4.11 m x 2.65 m x 4.81 m Lajdpfx Ajy Ak Nusk Doa Total weight: 22,000 kg Equipment Display text German Display text English CEE socket 16A Hydraulic core pull 4x Air valve 1x Machine with water battery Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), functionality: fully functional, Four-side Planer Weinig Unimat 2000 Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom 11 kW 12,000 rpm Right 7.5 kW 6,000 rpm Left 11 kW 12,000 rpm Right 7.5 kW 12,000 rpm Top 11 kW 12,000 rpm Bottom 7.5 kW 12,000 rpm Top 11 kW 12,000 rpm Lodpfsy Emi Asx Ak Djaa Bottom 30 kW 6,000 rpm Feed speed adjustable via inverter up to 36 m/min 4 powered feed rollers in the worktable Pneumatic material pressure rollers Total machine power: 106 kW Year of manufacture: 2002

Condition: new, Year: 2023 Condition: Used Serial Number: 273-00-129 Stock Number: 2948 Lodpfxoyz Sxhe Ak Doaa Cutting diameter: max. 200 x 180 mm Description: Includes extra blade Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Weight: 320 kg

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, 3-axis welding positioner, 2-ton load capacity, in good condition Incl. hand remote control (foot control available on request) Lodpjyupgzofx Ak Djaa Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Year of construction: 2007, condition: good (used), fuel type: electric, Golf cart CLUBCAR PRESEDENT 2-seater Golfkar Golfcart 2007 with charger Video can be sent via Whatsapp. Ongoing stock, see website. Lsdpfx Ajy Ewglok Dsaa Prices are ex Nuland. Van de Wert Trading B.V. has a rotating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees. (see our general terms and conditions) You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland