Used Angle Bender for sale (6,739)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm Lsdpfx Akemck Rysqjrk - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: as good as new (ex-display), Year of construction: 2024, Tube Bender BB 48 without mandrel Ledpfefp Al Uox Akqork - model BB 48 - capacity up to 48 x 3,0 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 2,2 rpm - motor 1,5 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight ca. 200 kg

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up operations to complex sequence applications—with up to 20 phases and 250 cycles—for optimal speed, accuracy, and ease of use with every connection. The controller features various interfaces, including an Ethernet port, an RS232 port, 7 logic inputs, and 8 logic outputs (24 volts). The CVI II controller can operate an ER series handheld power tool or an EM series stationary screwdrive. It is important to note that the CVI II can also be used in combination with a sensor-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Storage Capacity Between 2,500 and 8,500 tightening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening Strategies – Torque and Angle Monitoring – Angle and Torque Monitoring – Torque and Angle Monitoring – Torque and Angle Rate – Prevailing Torque – Yield Strength – Stall Torque – Torque and Angle – Plastic Zone Detection – Additional Torque and Angle Sensors – Self-Tapping – Current Monitoring Connectable Tools: Angle Screwdrivers / Stick Screwdrivers / Pistol Screwdrivers / Stationary Screw Spindles Dimensions (L x W x H): 400 x 400 × 330 mm Weight: 30 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! Ledpfewxv Hkex Akqsrk International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2025, controller manufacturer: Self-developed brand, workpiece length (max.): 2,000 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, machine/vehicle number: 2016, Product Features: The KaFe manual Panel Bender (Bending Center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per cycle. Full servo control ensures product accuracy within 3 seconds. Lrsdpsxu Uhvefx Akqek Product Function: The KaFe Manual Panel Bender (Bending Center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance corporate image in the sheet metal industry.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 280 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Bender / Brake - RG-C 2012 + Cutter 2.0-Meter Sheet Metal Bender – Professional Tool for Roofers Our 2.0-meter sheet metal bender is a durable and precise machine designed for roofers and sheet metal professionals. With its sturdy construction and advanced mechanisms, it ensures high reliability and ease of use, even under intensive operation. Equipped with additional functionality-enhancing features, this model allows for greater precision, repeatability, and ease of metal sheet handling. Key Features: ✅ Working length: 2100 mm – enables efficient bending of sheet metal, increasing productivity. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. ✅ Optional accessories – possibility to equip with additional accessories for enhanced functionality. Our 2.0-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. ❗️2.0-Meter Sheet Metal Bender – Technical Specifications❗️ Maximum bending length: 2100 mm / 83" Maximum bending capacity: Lrsdpfx Asv D Hw Sjkqek ➡️ Steel sheet: up to 1.2 mm ➡️ Aluminum sheet: up to 1.5 mm ➡️ Copper and zinc sheet: up to 1.5 mm ➡️ Stainless sheet: up to 0.6 mm Maximum bending angle: 130° Bending beam thickness: 25 mm Maximum clamping beam lift height: 100 mm Overall dimensions: 2460 x 900 x 1200 mm Weight: Approx. 280 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): ▪️Back support arms for large sheets ▪️Functional protractor for precise angle bending ▪️Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): ▪️Swivel casters with brake Enhanced Features for Precision and Efficiency: 👉 Rear support table – simplifies sheet metal positioning for smooth, accurate processing. 👉 Angle gauge – ensures repeatability of bending angles for consistent results. 👉 Front measuring bumpers – enable cutting multiple sheets to the same width without additional measurements. 👉 Solid steel springs – assist the bending beam, providing lifelong durability and eliminating the need for replacements, unlike gas springs. 👉 Turnbuckle adjustment – allows fine-tuning of the clamping beam force based on the thickness of the processed sheet, ensuring a secure and even hold. Applications and Benefits: This 2.0-meter sheet metal bender is an essential tool for roofing contractors, sheet metal workers, and workshops, offering an efficient and precise solution for bending roofing components, flashings and various sheet metal trims. With its user-friendly features, repeatable precision, and enhanced durability, it is the perfect choice for professionals seeking high-quality results. The price does not includes shipping cost. Contact us for more information and to find the perfect model for your needs!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! FREE SHIPPING TO GERMANY. Shipping costs to other countries on request. Ljdpfx Akov Ax N Djqjrk

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping Lodpoivqrbsfx Akqsrk - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) Ledpfx Astt Ecdskqjrk 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 Ljdpfsu Rt Syjx Akqsrk The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. Lredpfx Aof Epznskqek It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: Lrodjf Eywwopfx Akqek -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, functionality: fully functional, Year of construction: 2026, RCMI 280 Three-roll profile bending machine Technical characteristics: Section modulus 720 cm³ Main shaft diameter 280 mm Side shaft diameter 280 mm Outside diameter of the bending rolls 720 mm Adjustable rolling speed 0-4 m/min Installed power 44 kW (60 hp) Weight 34,000 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls powered (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rollers, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Lrsdpfeiivhdex Akqjk Technical documentation and CE certificates Digital displays for the rolls position of the side rolls

Condition: new, functionality: fully functional, Year of construction: 2026, Specifications R-62 Lrsdpfxjiinllj Akqek Standard rolls diameter: 460 mm Diameter of the central / side shafts: 180 /160 mm Motor power: 15 kW Rotation speed: 0-7m/min Net weight: 8,000 kg Standard version R-62S: Vertical working position Hydraulically variable speed of rotation on all three rolls with hydraulic motor. one motor for the top roll, one motor for the side rolls Automatic speed compensation between top and side rolls Hydraulic adjustment of the side rolls Digital displays for the position of the side rolls Fully hydraulically adjustable guide rolls SKF ball or roller bearings in all journals Hardened gears running in oil Hanging control unit with mini joysticks for all control functions with digital displays Emergency push button Complete set of adjustment tools Operating and maintenance manual

Condition: new, functionality: fully functional, Year of construction: 2026, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Ljdpfx Aod Eqg Nekqerk Weight 5,720 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 A 50.0 PTFE VA Lrsdpeigwcyjfx Akqok -Connection: DN50 PN16 -Dimension: 290/103/H260 mm -Weight: 4.4 kg

Condition: good (used), clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm Ljdevx Nlhopfx Akqerk -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Lrodpfx Akoxrgbpoqjk -Table surface: 1000x800 mm, height 1250 mm -Wall thickness: 90 mm -T slots: slot width 36 mm -Dimensions: see photos -Dimensions: 1000/800/H1250 mm -Weight: 1069 kg

Condition: used, Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm -Bores: M20 -Clamping grooves: 172 x 21 mm -Dimensions: 995/197 / H995 mm Lsdpfx Akehcgklsqsrk -Weight: 160 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm Lrjdeq Rx Afepfx Akqek -Weight: 18 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter, angle milling cutter, shell angle milling cutter Lrsdpfju Uwvnox Akqsk -Cutter head: face milling cutter SK50 with extension -Type: Ø 140 mm -Recording: SK50 -Dimensions: Ø 140 x 335 mm -Weight: 13.1 kg

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm Lrjdob Nblyopfx Akqok -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Condition: used, Clamping angle for workpiece clamping Lrjdpfxod Duu Ue Akqsk -Dimensions: W/H/L 355/345/550 mm -Thickness: 33 mm -Long hole: 34 x 350 mm -Surface: milled -Weight: 74 kg

Condition: used, Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing Lrodpjlcfixsfx Akqek -Number: 2x clamping angle available -Price per piece -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm Lodpfx Akjlg H I Sjqjrk -Weight: 9.7 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve Lrodpfx Aksigrwfjqek -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve unused -Type: 2000 D23 Ø 20.0 PTFE VA -Connection: DN20 PN16 -Number: 2x valve available -Price per piece -Dimension: 220/100/H90 mm -Weight: 1.4 kg