Pipe-Bending Machine

ERCOLINA Mega Bender 030 / Top 030

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! Ijdpfx Aewbil Ssbgsia With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic inverter on spindle Iiedpforq D Ukox Abgoa SK40 machine in very good condition

Year of construction: 2008, condition: used, functionality: fully functional, Unit was used for grinding oil cleaning for carbide machining. Eckert cooling unit 3 filter towers with sludge bag Iiedpfx Aelczcwjbgsa Filter capacity 80-100 l/min. Filter fineness 3-5 µm In the description the unit is described with sludge drum, technical data are similar. Original instructions available in paper form Videos available on request.

Condition: like new (used), Manesty D3B tablet press Isdpjiy Nnyofx Abgoia Serial: 24D117 Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: Iodpfex D E Hbsx Abgjia • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Iisdjtia Hhepfx Abgsa

Condition: used, Year of construction: 2020, Technical details: x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg Iedpjyqyfgofx Abgeia B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. *

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours Iedpoivg Hgefx Abgjia This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit.

Condition: used, Pillar drilling machines Iijdpfx Abjb N Ezrogoa

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Isdpfx Aox E Ahzobgsia Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).