Used Skodock Dn 100 for sale (24,023)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Pgedovf E Avjpfx Amiok Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Typical applications: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/350-A Temperature range: Warm chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Pgodjy Hkgbjpfx Amiok Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Precooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Program operation - Digital setpoint and actual value display - 2-zone system (warm and cold chamber) - Automatic transfer basket for shock tests Technical design: - Warm and cold chamber separated - Transfer basket system for rapid temperature change - Test chamber made of stainless steel - Insert shelf / wire rack - Viewing window in door - Water cooling connections available - Integrated control cabinet Dimensions: External dimensions (HxWxD): approx. 2335 x 940 x 1820 mm Installation dimensions (HxWxD): approx. 1990 x 940 x 1652 mm Internal dimensions (HxWxD): approx. 410 x 480 x 660 mm Weight: approx. 950 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality thermal shock test chamber manufactured by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for thermal shock testing and is commonly used in industry, research, and quality assurance. Application fields: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Pgedpfsy Hkfdex Amiok Max. 100 K/min on average for shock test cycles (without radiant heat) Transfer rate: ≤ 15 min in the range -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 16.7 kW Nominal current: approx. 26.8 A Site-side fuse: 32 A slow-blow Connection: Cekon 32 Cooling system: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features and equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs) - Digital setpoint/actual value display - RS232 interface - 2 free switching channels for controlling test objects on-site - Fault alarm with floating contact (rated for up to 30 V-DC, 2 A) - EMC tested Technical design: - Hot and cold chambers - Transport basket with spindle drive - Test chamber / basket made of stainless steel, Material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with closing plug - Compressed air connection 1/4" male - Pressureless condensate drain R 1/2" internal thread - Safety door lock - Lockable door with window Dimensions as per installation drawing: External dimensions approx.: 2335 x 940 x 1820 mm Entry dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further data: Degree of protection: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh For your assurance as a buyer, the following procedures are performed on all offered chambers beforehand: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) Podjy Hkd Hjpfx Amiegk - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Pgodjydbfhepfx Amiek Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Required space: 500 x 600 mm

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm Psdswwl I Iopfx Amisgk min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: good (used), functionality: fully functional, Door lock milling machine SL 100 - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW Pgodpfxeygm Awe Amiek Transport available at extra cost!

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Pgedpfxjwnprxs Amiok Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Serial No.: 33-0241 Clamping range: 10–160 mm Diameter for facing up to 100 mm Clamping length: 90–1950 mm Drill spindle: ISO40 DIN2079 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm Podpfx Aext Dzpomijgk The machine was in use until recently and is fully operational. Price: net, ex stock, loaded.

Condition: used, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,110 mm, loading space width: 1,260 mm, loading space height: 305 mm, total width: 1,710 mm, total height: 600 mm, A67 GW26400283277, Low-loader by Anssems, model GT 750.211x126 Gross weight: 750 kg, low-loader, unbraked, 100 km/h, Pgodpfxeyqdqtj Amiek and much more. Errors and prior sale excepted.

Condition: new, 100 mm Pedpfoy H N Idsx Amisgk roll diameter 315 mm bending speed 5 m/min bending capacity - flat iron max. 12 x 20 mm 75 mm Drive 11 kW weight 2.600 kg range L-W-H 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 Pgsdpsy Emtujfx Amiok 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: good (used), Year of construction: 2009, Internal Item No.: 26044 Universal Milling Machine Psdpfx Amey H D N Njiogk Optimum UF 100 Year of manufacture: 2009 + 3-axis digital readout Spindle taper: SK40 Spindle speed: 45 - 1660 rpm Table: 1120 x 260 mm Travel: X 625 / Y 220 / Z 430 mm Dimensions (LxWxH): 200 x 200 x 170 cm Weight: approx. 1500 kg The machine is fully functional and can be inspected under power, by appointment, in a heated storage facility of over 500 m².

Condition: used, Year of construction: 2005, Horizon brochure production line consisting of: VAC-100 vacuum collating tower (2 units) SPF-20A stapling and folding module FC-20A front trimmer Technical data: Horizon VAC-100 – vacuum collating tower Function: Collating printed sheets Number of stations per tower: 10 (20 in total with 2 towers) Paper format: min. 120 × 148 mm, max. 350 × 500 mm Paper weight: 52–208 g/m² (up to 300 g/m² in some cases) Stack height per compartment: 55 mm Production speed: up to 9,900 sets/hour Control: touchscreen control panel Horizon SPF-20A – Stapling and folding module Function: Stapling and folding brochures Stapling heads: 2 × Hohner 48/5 Paper size: 120 × 180 mm to 350 × 500 mm Final format: 90 × 120 mm to 250 × 350 mm Stapling thickness: max. 4 mm (stapling only), max. 2 mm (stapling + folding) Stapling distance: 73–160 mm Wire diameter: 0.5 mm Production speed: up to 4,050 brochures/hour (A5), approx. 3,200 brochures/hour (A4) Power consumption: approx. 450 W Dimensions: 271 × 81 × 110 cm Weight: approx. 490 kg Horizon FC-20A – Front trimmer Function: Front edge trimming of brochures Brochure size: max. 250 × 20 mm; min. 85 mm Trim size: max. 20 mm Pgsdpexpv Adjfx Amisk Processing: min. 4 pages / max. 88 pages (at 80 g/m²) Production speed: up to 3,400 cycles/h Power supply: 230 V / 50 Hz, 0.2 kW Dimensions: 610 × 810 × 1,070 mm Weight: approx. 240 kg

Condition: used, maximum load weight: 574 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 145 mm, total width: 2,047 mm, total height: 905 mm, A33 GW26N0158435 Lowering motorcycle trailer by Unsinn, model UA 2615-7-13, GVW 750 kg, lowerable, 1x centrally mounted airline rail, 100 km/h. Vehicle not prepared/conditioned. Pgsdpfx Ajymvalemisk Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Pgodpfsyuty Sox Amiek Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. Pgodpfxsy Hfnmo Amiek This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: used, Year of construction: 1997, operating hours: 3,861 h, overall weight: 1,500 kg, rotor diameter: 235 mm, total length: 2,500 mm, total height: 2,500 mm, total width: 1,500 mm, rotor width: 794 mm, power: 11 kW (14.96 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, No. 04527 Single-shaft shredder Vecoplan VAZ 100/80 U40 Used, year of construction 1997, 3861 operating hours The waste shredder VAZ 100/80 is designed for shredding wood waste, pallets, crates, particleboard and fiberboard, paper and cardboard, plastics, etc. The machine is most commonly used to produce fuel chips from wood waste, wood scraps, and pallets. Feed opening 1000 x 800 mm LW Universal rotor, tool size 40 Connected load 13 kW, drive power 11 kW Throughput capacity for logs 250 - 350 kg/h Throughput capacity for particleboard 800 - 1000 kg/h Screen hole size (diameter) 25 mm Rotor diameter 235 mm, rotor width 794 mm, speed 95 rpm Rotor mounted in self-aligning roller bearings with steel housing Feed unit made of channel steel, driven by hydraulic cylinders Guided in brass rails, with rollers on the sides Main drive via gear motor with two-stage worm gear Motor speed 95 rpm Automatic foreign object breakage protection PLC control, automatic mode / manual mode Hydraulic unit with 2 operating speeds 2 suction connections on the sides, 200 mm each Currently, the machine is designed so that the wood chips fall downward. If the opening at the bottom is closed, an extraction system could be connected. Includes 1 new counter blade, various cutting blades, complete technical documentation Transport dimensions approx. 2500 x 1500 x 2500 mm LWH Psdpfx Aey Hlgiomiogk Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: excellent (used), Desposer kitchen waste disposal unit, waste shredder, garbage chute -Power: 0.75 kW -Voltage: 230/460 V -Speed: 1725 rpm (60Hz) -Connection: Ø 170 mm -Quantity: 2 available Price: per piece Pgodpfjb A Hp Isx Amiok -Dimensions: 230/H440 mm -Weight: 20 kg

Condition: like new (used), Year of construction: 2008, Retrofitted: 2026 Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: OptionalMaximum weight on table (kg/m2): OptionalNumber of T slots: UndefinedT slots dimensions: Undefined Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 0 - 2500 mm (adjustable) Milling head Head type: Universal Auto-indexing UAD (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y-Z): 30000 mm/min Weight and dimensions Machine weight approx.: 70000 kgMachine dimensions approx.: 17560 x 12800 x 4270 mm Accessories Guarding: pendular with automatic front door and peripheral safety fenceAutomatic tool changer: ATC80 with electrical motorsChip conveyor: 1 front longitudinal and 1 transversalExternal coolant high-pressure coolant through spindleElectronic handwheel: 6FX2007-1AE14 SiemensOperator´s cabinet: adjustable in vertical traverse Other technical features 2 ROTARY TABLES:Model:   DEMMELER DRLTS1800Table surface: 2400 x 1800 mmMaximum load on table: 40 TT slots number: 9T slots dimensions: 22 mmRotary axis: HydrostaticMaximun speed (S1/S6): 3.4 / 5.4 r.p.m.Clamped tangencial torque: 175000 NmW axis: 1500 imum feedrate: 20000 mm/ntity of guideway (W axis): 4 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Pgodpfx Ameyvwchjiok

Condition: good (used), Pressure 100 t Bending length 2050 mm Pgsdpfxsltk Uxo Amiek Control CYBELEC DNC 880S Equipment/accessories: - axes controlled: Y1, Y2, X, R, Z1, Z2, X1 - hydr. Wila clamping on top - motor. Crowning

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked Pgodpey Eylwsfx Amijk - Set according to manufacturer's specifications - Immediately ready for operation

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Pgodpfxovvi Sco Amijk

Condition: new, Year of construction: 2025, pressure 100 t stroke 380 mm table surface area 1100x424 mm Pgedpfxsxu Nv Io Amijk dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: used, Year of construction: 2015, controller manufacturer: Fanuc, controller model: 31i-B, _____ Description: Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mm Turning length : 678 mm In General: Year of manufacture:2015 Control system:Fanuc i 31-B Turning diameter:175 mm Max. turning length:678 mm Spindle: Podpfey Hnt Esx Amisgk Technology:Motorised spindle Speed:4,500 rpm Power:11 kW Bar capacity:65 mm C-axis:0.001° Clamping cylinder:Hollow clamping cylinder Chuck:Collet chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Power:7.5 kW Bar capacity:51 mm C-axis:0.001° Clamping cylinder:Semi-hollow clamping cylinder Chuck:Collet chuck Tool carrier I (X/Y/Z/B): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:330 mm Y-axis:80 mm (+/- 40 mm) Z-axis:1,040 mm B-axis:182° (+/- 91°) Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12/24 Tool holder:BMT Tool drive:6,000 rpm X-axis:127 mm Y-axis:65 mm (+/- 32.5 mm) Z-axis:678 mm Equipment: Chip removal:Chip conveyor Coolant supply:2x high-pressure coolant pumps Bar feeder:IEMCA Master 80 HF - 4 meter Finished part removal:Part gripper + conveyor belt Set-up operation:Electronic handwheel