Used Peak Ph-200-220 for sale (20,817)

Condition: used, Year of construction: 2014, functionality: fully functional, pressing force: 2,000 t, table width: 2,900 mm, table length: 5,000 mm, Hydraulic Tryout Press Manufacturer: SCMB Type: PHT 2000 The machine offered is a hydraulic tryout press. In 2014, this press underwent a comprehensive general overhaul in Germany by a specialized company. During this process, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from reputable European manufacturers were used for the overhaul. A special highlight of this tryout press is that both the ram and the bolster table are equipped with draw cushions. The bolster table is designed as a movable table. The ram can be stopped and mechanically locked in any desired position as required. Technical details: - Pressure: 2000T with ram plate - Table size: 5000 mm x 2900 mm - Draw cushion size: 4200 mm x 1800 mm - Draw cushion stroke: 280 mm - Draw cushion force: 380T - Draw cushion load: 4-way regulated draw cushion, no need for balancing - Table height above floor: 585 mm - Ram size: 5000 x 2900 mm - Ram cushion size: 3900 x 1500 mm - Ram cushion stroke: 150 mm - Ram cushion force: 200T - Ram return force: approx. 95T - Ram upper position: 1650 mm - Ram stroke: 1050 mm - Air pins recessed by 10 mm - Minimum installation height: 650 mm - Clamping below: manual clamping - Clamping above: manual - Centering: via air pin pattern Pgedpfsyxhp Dox Amisk - Sliding table travel: 3000 mm - Ram locking: Stepless - Blanking shock damping: No The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy of these details. The actual technical data and functionality of the machine are decisive. Toolmaking (Tryout / Spotting)

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully until the end!! The pump is not suitable for: Water, food industry, or non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more appropriate. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal is also not EX-certified! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently corrosion-resistant. It is especially used where chloride-induced pitting and crevice corrosion or stress corrosion cracking could be an issue. Alloy 59 is used for: environmental technology, chemical industry (chemical processes involving oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Grade 2.4605 is predominantly used in the chemical industry, the pulp and paper industry, and in flue gas desulphurization plants. Pgjdpfx Ameigqutoisk Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, especially to mixed sulfuric/hydrochloric acid environments. Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when catalysts based on chlorides are used - Multipurpose installations in the chemical industry - Plant parts in the fine chemical and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuel power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulphuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal reconditioned by specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 260 mm, throat depth: 410 mm, controller manufacturer: Cybelec, controller model: VisiTouch 19, working width: 3,100 mm, bending force (max.): 200 t, distance between stands: 2,550 mm, control type: CNC control, degree of automation: automatic, Baykal APHS PRO 31200 CNC Press Brake The Baykal APHS PRO 31200 is a CNC-controlled press brake constructed with an all-steel welded frame. The machine features HAWE hydraulics, Fiessler laser safety system (AKAS / LCII), as well as a CNC-controlled crowning system, and is operated via a Cybelec Visitouch 19MX 3D control unit. Technical Specifications: Pressing force: 200 t Bending length: 3100 mm Bending length between frames: 2550 mm Throat depth: 410 mm Table height: 880 mm Max. ram stroke: 260 mm Motor power: 18.5 kW Oil tank capacity: 210 l The 5-axis backgauge (X + R + Z1 + Z2 + X5) enables precise positioning. The positioning accuracy is ±0.03 mm, and the travel speed along the X-axis is 330 mm/s. Control System: The Cybelec Visitouch 19MX offers intuitive operation via a 19" touchscreen with 3D visualization and simulation. Parts can be imported as DXF flat patterns or 3D files. Features such as automatic bending sequencing, backgauge positioning, and tool setup assist with programming complex parts. Pgsdpfx Amoyrgcnsijk Equipment: - Fiessler AKAS / LCII laser safety system - Automatic motorized table crowning (WILA system) - Manual quick-release clamping, Promecam / AMADA style - 2 front sheet supports, laterally adjustable - Centralized lubrication - Hour meter - CE compliance Machine Data: Year of manufacture: 10/2025 Serial number: 31880 Weight: 11,500 kg Dimensions (L×W×H): 3820 × 1800 × 2700 mm The machine is in stock and available for immediate delivery. The warranty is 12 months for single-shift operation.

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Pgjdpfxsgkgwfe Amiok Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: used, functionality: fully functional, Carton Erector BE-2200 Manufacturer: Soco-System Condition: used Model/Type: BE-2200 ATS Overall length: approx. 2960 mm Overall width: approx. 1700 mm Overall height: approx. 1340/1600 mm Carton size: min. 180 L x 130 W x 100 mm H Carton size: max. 440 L x 315 W x 450 mm H Internal article number: 2026032301 The conveyor system was in operation up until dismantling. Features: - Condition: fully functional, with signs of use - Ideal for rapid material handling Podjywkbtopfx Amiegk - Professionally dismantled and packed - Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the high-quality workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customized offer or advise you on design or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our outstanding network of professionals. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 Pedpfx Asrbm T Domiogk -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: good (used), Flange connection, V-flange, pipe flange, stainless steel flange, safety breakaway coupling -Pipe flange: Stainless steel flange -Type: HG/T20592-2009 PL200 PN10 304 Psdpfxjymar Ej Amijgk -Diameter: Inside 213 mm -Bolt circle: Ø 295 x 22 mm -Dimensions: Ø 340 x 265 mm -Weight: 26.1 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 30,000 kg, power: 250 kW (339.91 HP), input voltage: 400 V, Stationary shredder LINDNER Jupiter 2200. Pjdpfjuv Htuex Amisgk Electric drive: 250 kW Including switch cabinet and hydraulic unit.

Condition: new, Year of construction: 2025, weight 2600 kg height 1550 mm 0 2197 l length 3800 mm revolutions per minute 1500 U/min voltage 380/50 V/Hz engine output 2 x 7 kW The VKT 2200 is a linear vibratory finishing machine and is used for the surface treatment of parts made of all types of metallic and non-metallic materials. The machines in this series are generally used for long and large-volume parts. With the help of movable partitions in the machine, sensitive parts can be processed without being damaged by friction from other parts. Pjdjymf Sqepfx Amiegk Optional accessories - Pneumatic sound insulation hood - Speed control - Dosing pump - Magnetic valve - Electrical control panel stand - Rinsing water pipe system The pictures are for orientation only. The optional accessories can be surcharge. Gerd Wolff reserves the right to change the colour and technical data of the machines. The VKT 500 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: used, Year of construction: 2015, Includes software, PC and monitor! Pgjdpsynh Rfsfx Amiek • Up to 305 mm/s at 1600x800 dpi • Up to 152 mm/s at 1600x1600 dpi • Max. print width: 1067 mm • Max. print length: 15 m • Also prints on thick media up to 16 mm *Specifications according to manufacturer!

Year of construction: 2006, condition: good (used), Built in: 2009 - Type of strapping: single, double, multiple - max speed for single strap: up to 40 bundles/min - max speed for parallel (double) strap: up to 20 bundles/min - min bundle dimensions (w x l): ~180 x 130 mm - max bundle dimensions (w x l): ~580 x 510 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm Pgodeh Nuh Sopfx Amijk - max weight bundle/package: ~20 kg - Infeed / outfeed (conveying) height: ~800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 160/180/200 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~650 mm - Over all width equipment: ~1750 mm - Over all height equipment: ~1950 mm - Input Power: ~1,1 kW - Voltage: 400 VAC, 3Ph, N, PE, 50 Hz - Air requirement: ~8 l/Umreifung 6 bar / ~8 l/cycle 6 bar - Weight: ~500 kg - Operator Manual included as print-out on paper - Optional Equipment: Can be combined with a in-line strapping machine to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: new, Year of construction: 2026, The stationary mitre band saw machine for universal use Design: - Solid saw frame made of die-cast aluminium Pgodpsg Hy Shsfx Amiok - Saw frame can be swivelled over the material - Robust vice - Large cutting range - Two cutting speeds - Saw blade guides made of hard metal with ball bearings - Electric coolant system Technical data: - Mitres from 0° to 60° right hand - motor power 2000 W/1-Ph. 230 V - infinitely variable belt speed from 35 - 80 m/min. - machine weight 140 kg - saw band dimension 2140 x 20 x 0,9 mm cutting ranges: 0° = Ø 175 or 200 x 75/190 x 135 /175 x175 mm 45°= Ø 110 / 150 x110 / 110 x 110 mm 60°= Ø 75 / 100 x 70 / 75 x 75 mm

Year of construction: 2025, condition: ready for operation (used), functionality: fully functional, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, working length: 2,500 mm, machine/vehicle number: 0100-0149-2024, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Working length: 2,500 mm Psdsym Di Iepfx Amisgk MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,100 x 1,500 mm Weight: 700 kg EQUIPMENT Suitable for flat material External reference: Lot 15 / Blickle

Condition: new, Year of construction: 2025, machine/vehicle number: 2512377, fuel type: diesel, motor manufacturer: JCB 448 TWGA, General information Field of application: Construction Weights Empty weight: 1.250 kg Functional Generator capacity: 80 kVA CE mark: yes Other information Generator: Mecc Alte ECP34 1s4 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Emission level: Stage V / Tier IV final Pgedpfx Aox Tyx Tjmiek Transport dimensions (LxWxH): 1,63x0,8x1,25 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Control Panel

Condition: defective spare-parts repository (used), functionality: not functional, power: 20 kW (27.19 HP), fuel type: diesel, color: white, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2011, Equipment: all wheel drive, Equipment carrier: + Egholm + City Ranger 2200 T MODULOflex Pedpfxoyv A Ayo Amiegk + Year of manufacture: 2011 + Daihatsu diesel engine 950T + Sweeper attachment + Parts donor with missing components Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, intermediate sale reserved!

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos Pedpeh S Ti Ejfx Amijgk -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal Pgedeyuplkjpfx Amijk -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Pgedpev I Ddqefx Amiek 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: excellent (used), Van Aarsen radiator model 2200 Pgsdpfx Aswcp U Nomiok

Condition: excellent (used), Year of construction: 2006, load capacity: 130 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2, This system is equipped with a KUKA KRC2 control unit and features the KR 150 L130-2 2000 robot model. The robot offers a payload capacity of 130 kg and a reach of 2900 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 L150-2 2000 KRC2 Payload: 130kg Arm Reach: 2900 mm Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 Pjdpfsw Idw Isx Amisgk Included: Manipulator + KRC2 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Psdpfx Amoud R T Sjijgk

Condition: new, MIG/MAG – Pulsed MIG/MAG – TIG DC HF – Electrode Single-phase power supply 1x230V greenWave® inverter technology Integrated wire feed unit Pgedpfsyrfd Rjx Amiok 9 innovative welding processes from Böhler Welding 3.5" color LCD control panel 220A at 35% (40 °C) 23.7 kg

Condition: excellent (used), Year of construction: 2006, load capacity: 150 kg, arm reach: 2,700 mm, The KUKA KR 150 is a 6-axis industrial robot designed for high-precision and high-speed applications. With a 150 kg payload capacity and a wide working envelope, it delivers reliable performance in tasks such as welding, assembly, handling, and machining. Model: KR150-2 2000 Condition: Used Pgjdjw Nat Ispfx Amisk Year: 2006 Included: Manipulator + KRC2 + KCP2 Teachpendant + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: Kuka's Website)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Pgjdpfx Ameq Hfahsiek As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 2007, functionality: fully functional, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, This system is equipped with a KUKA KRC2 ed05 control unit and features the KR 210-2 2000 robot model. The robot offers a payload capacity of 210 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing Pgodpfx Asw H Nuqsmisk CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 KRC2 ED05 Payload: 210kg Arm Reach: 2700 mm or 3100 mm Condition: Used and tested Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )