Used H Frame Press for sale (66,849)

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Ljdpfx Asw A Rdrjkqohf Heating system: Infrared Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm

Condition: new, Year of construction: 2021, Aircraft Piston Compressor AIRPROFI 703/270/10 H Silent including accessories (new, unused condition): Accessories included: - Aircraft refrigerated compressed air dryer AD 36 - Condensate drain AMD - AOWT 2 oil-water separator - Pre-/fine filter - Extremely quiet operation due to sound-insulated housing and additional silencer on the intake filter - Suitable for installation in noise-sensitive areas and directly at the workplace - Two-cylinder high-performance cast iron compressor unit runs at low speed for particularly smooth and low-vibration operation: less wear and longer service life - Large fan wheel on the compressor and temperature-controlled radial fan on the housing ensure optimal cooling of the entire interior - Intercooler and aftercooler, as well as an additional air duct between motor and compressor, minimize condensate formation - Premium Condor pressure switch - Equipped with glycerine-filled pressure gauge, operating hours counter, and fault indicator via LED lights - High-quality electric motor with motor protection switch and soft start - Integrated phase monitoring - Mechanism for easy tensioning of the V-belt - Service-friendly design - Ready for connection with all fittings and safety devices - Models with air receiver: internal and external galvanized air receiver Dimensions and weights: Length approx. 1690 mm Width/depth approx. 780 mm Height approx. 1740 mm Weight approx. 262 kg Air receiver: Max. pressure 10 bar Tank capacity 270 l Electrical data: Connection voltage 400 V Mains frequency 50 Hz Noise emission: Sound pressure level Lp 63 dB(A) Sound pressure level measured at 1 m distance according to DIN 45635 T 13 Compressor: Compressor system: HOS Intake capacity approx. 674 l/min FAD (free air delivery) approx. 550 l/min FAD measured at 6 bar working pressure Lhodpfx Aeyxyiiskqsf Number of cylinders: 2 Number of stages: 2

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Lsdpfsdfc Unsx Akqehf SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. Lhodpfx Ajgwa T Rokqjf 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW Ledpfxegwa Urs Akqshf 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW Ljdsdfc Iyspfx Akqjhf 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars Ljdpfx Akegv I Ihsqshf 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg Ledpfx Ajgv I N Uskqehf 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. Lhjdpedfcqasfx Akqjf SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! Lhodpfxed Iya Ne Akqof IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. Ljdpfx Akodfc Ikeqjhf 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: not inspected (used), Year of construction: 2022, machine/vehicle number: 792-1017, functionality: unexamined, stroke length: 20 mm, table width: 300 mm, table length: 300 mm, operating pressure: 6 bar, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Ljdpfxjyn Ef Hs Akqohf Maximum working pressure: 0.6 MPa / 6 bar Air consumption: 30 l/stroke Stroke: 20 mm Table dimensions: 300 x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 1150 mm Machine weight: 150 kg Note: The pressing tool is not included in the scope of delivery. External reference: Groven - Lot 11

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EP8607, Press brake punch for Trumpf Lhsdpfx Akjyzpf Ejqsf 86 degree H220mm gooseneck punch 42CrMo material with full body hardened and radius tip laser hardened

Condition: used, Format: 0x0 Equipment: Lhsdpfx Akox Rh D Ssqof Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes Lhjdpfx Asgvkmrjkqsf can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos Lhedpex Tpg Hefx Akqjf

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used Ljdpfx Aeyim Ayekqshf • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Lhsdpfxjxuhw Do Akqjf Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 Ljdpfxjv Sd S Nj Akqehf If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Lhsdpfx Akeyg Hcdjqef

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters Lhedpfx Ajh T Dctokqef connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: Lsdpfx Aswud Tkjkqjhf max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: used, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2007, Equipment: ABS, * Anfragen gerne per WhatsApp * Auflieger für Wechselbare Presscontainer * Hersteller H&W * Typ: HWDCSS39 * Scheibenbremsen * ABS * Liftachse Lsdpfshy R Swsx Akqshf * Lenkachse * hyrd. Ausschubzylinder * 4 x Containerveriegelung Twistlock * 7200 kg Leergewicht. * Reifen 385/55R22,5 ca. 80-70-80% * deutches Fahrzeug * Neupreis 73000 Euro * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. * Keine Gewähr auf Eingabefehler. Transport zum Hafen möglich Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Ljdpfevd Aavex Akqohf Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: used, mileage: 167,307 km, power: 257 kW (349.42 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 15,850 kg, maximum load weight: 10,150 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 2,500 mm, total width: 3,550 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio, cruise control, ABS (anti-lock braking system), constant throttle, raised exhaust, automatic, lifting+lowering, central lubrication system, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, last axle forced steering, environmental badge green Wheelbase: 4200 mm Body: FAUN POWER PRESS 524 , WAAGE SYWATEC scales Sywatec weighing range 200kg-12000kg, reversing camera Vehicle is without engine!!! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lodjvhhgvopfx Akqshf