Miscellaneous

Berg und Schmid Toggle press for beech corners

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg Csdpfoxtnn Tox Anwsgt

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg Codstu Ikcepfx Anwegt

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Cgjdpfev Sq S Nex Anwjt Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Cgjdpfx Aspk Iv Ujnwet Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Cgjdpfx Anox Nfr Dswst Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: good (used), Tranklein EH I corner cutter Cedpfx Anjwunicjwsgt Made in Germany. Perfect condition. This is a professional device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. A knife with a radius of 4 mm is included. Stack height 55 mm Weight 32 kg This is the currently produced model.

Condition: excellent (used), Functions: creasing, cutting, and perforating in a single pass Computer-controlled operation Automatic sheet positioning Maximum sheet size: 370 × 650 mm High cutting precision and repeatability Csdpfxextxdfo Anwjgt Ideal for digital production and small print runs

Condition: used, Year of construction: 2007, Format: Equipment: Allows you to cover covers of max. A3 + format. The machine is equipped with work table illumination, cutter guillotine, edge folding module, vacum table Max. Area (W x D) 750 ?? 476 mm. Max. bending length 750 mm. Max. dimensions of finished cover (closed) 352 ?? 455 (back) x20 mm. Thickness of cardboard cover 8 mm Cgedsxz Exlspfx Anwot Voltage 220-240 V. Dimensions of the machine (W x D x H) 1000 x 780 ?? 210 mm Weight 43 kg

Condition: excellent (used), Year of construction: 2023, Hefter Systemform SF1500-Plus compact folder, year 2023. Max. format: SRA3. Speed up to 18,000/h. 6 folding types. Automatic setting. Paper 52–170 g/m² (parallel fold up to 230 g/m²). Pile feeder for max. 800 sheets. Delivery conveyor. Located in our stock. Immediately available. Very good condition. Csdpexvrx Ijfx Anwjgt

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Straightness: Cgedpfx Anemcw S Sswot Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)