Used Lisec Akl- Hm for sale (1,833)

Condition: used, Year of construction: 1998, sheet width:130 mm coil weight:0,150 t coil internal dia.:300 mm coil external diameter:1000 mm Bdodpfeh Ra I Tex Akxsb dimensions of the machine ca.:0,75 x 1,50 x 1,70 m volt:230 V total power requirement:0,25 kW weight of the machine ca.:0,3 t Motor-driven Decoiler with mechanical central expansion, stepless coil speed, tip switch, emergency cut-off.

Condition: used, Year of construction: 1988, sheet width 150 mm Bdodper Eth Dsfx Akxob coil weight t coil internal dia. mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz Bodpjxyizhofx Akxedb

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Bdsdpfjpy Dxrox Akxsb Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Bdedpowr Dhcofx Akxeb Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 3500 /1900 Injection Moulding Machine Year: 2005 Clamping Unit: Clamping force: 3,500 kN Platen dimensions (H x V): 1,100 mm x 1,060 mm Tie bar distance (H x V): 800 mm x 710 mm Mould opening stroke: 670 mm Minimum mould height: 375 mm Bsdpfsw Dcxdsx Akxodb Maximum mould height: 710 mm Daylight: 1,380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Screw diameter: 55 mm L/D: 22 Injection pressure: 2,481 bar Screw stroke: 325 mm Shot volume: 772 cm³ Injection weight (PS): 710 g Injection speed: cm³/s Screw speed: 294 rpm Max. plasticising rate: 68 g/s Number of heating zones: 1 + 5 Electrical & Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank volume: 660 l Machine Dimensions & Weight: Approx. dimensions: 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Bjdpfx Akoxyqxuexsdb Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines Bdsdpfxjxyqw Rs Akxob The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Bdedpfx Aewq D Nqekxjb Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 injection molding machine Control: B6S Year of manufacture: 2011 Operating hours: 68038 Closing unit: Closing force [kN]: 3000 Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 710 x 610 Min./max. mold height [mm]: 375 Maximum opening width [mm]: 1150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Screw diameter [mm]: 55 Injection volume [cm3]: 653 PS injection weight [g]: 600 Bodpewrmqmsfx Akxodb Injection pressure [bar]: 2040 Maximum injection speed: 144 Additional equipment: Pneumatic valve - 4 pcs. Core - 2 pcs.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Bdodex A Dbbepfx Akxeb Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Bsdpfox A Df Tsx Akxjdb Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT The machine can be inspected and tested under power. Bjdpfx Akjx A A S Ejxedb Additional photos and videos available upon request. Loading and transport can be arranged.

Year of construction: 2025, condition: new, The hammer mill HM 300 is ideally suited for grinding soft, medium-hard, brittle materials such as catalysts, electronic scrap, gypsum, epoxy resin and many more. Bodpfx Aof Ulynskxjdb Max. Feed size

Year of construction: 2025, condition: new, The LITech hammer mills HM 120/200/300/400 are ideal for the pre-shredding of medium-hard, hard-tough & brittle materials such as floors, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and much more many more!! Bjdpfx Akjg Ay Dhsxodb

Year of construction: 2024, condition: new, The LITech HM 120 / 200 / 300 / 400 hammer mills are ideal for the pre-crushing of medium-hard, tough & brittle materials such as soil, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and very many more!! Bjdpfx Akegkr E Hoxodb

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional Bjdpoyc H U Ssfx Akxsdb • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: new, Label printers and carton sealing machines LogComp / Bedo Bdedpfx Aoy H Ex Sekxeb

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Bdjdox Sx R Sjpfx Akxjb Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 24205, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 100 mm, workpiece length (max.): 4,800 mm, workpiece width (max.): 1,800 mm, number of slots in tool magazine: 18, overall weight: 16,000 kg, spindle motor power: 12,000 W, number of spindles: 1, workpiece diameter (max.): 1,800 mm, Equipment: chip conveyor, documentation/manual, Exceptional machine and exceptional quality output. Machine was serviced by IMA technicians and original spare parts where used. Optic fiber and most of the compressed air pipes have been replaced with new ones. The automatic positioning of the vacuum cups is speeding the setup time. ImaWoop version 6.0 with Quicktool is making the operator life easier. You are always welcome to see the machine working. Anytime, a live visualisation of the machine through video link is available. CNC-portal processing centre make: IMA type: BIMA P 480 V, 180/480 Year of production: 2001 Short description Machine able to do a lot of complex tasks (milling, drilling, cutting, edgebanding, various angle cutting) - alternate processing - X = 2 x 2.400, Y = 1.800 mm - main spindle 12 kW - 18-fold tool changer - gluing unit with 6-fold coil-magazine Description working area with standard units Y = 1.800 mm changing table area with alternate processing: X = 2 x 2.400 mm /milling- and boring processing X = 2 x 2.100 mm /gluing processing CNC-line control IMATRONIC NT 231 Software Imawoop 6.0 automatic positioning of the vacuum cups Automatic lubrication Conveyor for waste and chips (belt) main spindle 12 kW with integrated C-axis 360 degrees autom. tool / adapter units changer 18-fold 1 edge gluing unit VT100 with glue application device edge thickness: 0,4 – 3 mm for 4-sided edgebanding and all around edgebanding with butt joint 6-fold coil magazine 1 end-trimming unit 0,8 kW adapter units included - saw, 90 degrees fixed - horizontal drilling unit with 4 ways - ABS edge milling unit - ABS edge radius scraper and horizontal scraper unit other adapters and tools available for extra cost Bodpfx Akott Rpwjxjdb Chip removal transport belt Air conditioned included in the electric cabinet

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) Bdodpfx Akow El Hmjxob (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.

Condition: new, Year of construction: 2026, overall weight: 70 kg, inner dimension length: 1,200 mm, inner dimension width: 800 mm, inner dimension height: 800 mm, load capacity: 1,500 kg, total length: 1,240 mm, total width: 835 mm, Hello Bsdoupuq Tspfx Akxodb I sell new Gitterbox containers with top flap Weight 70kg Load capacity 1000kg Stacking 1 + 3 pcs. Ral 7030 gray-stone Dimensions 1240X835X970 height. Price 150 eur/net/piece. Sale only on VAT invoice

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Bjdpsrnkw Defx Akxjdb Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. Bdodpfxswq Dvds Akxsb The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: excellent (used), drying rack for drying parts after painting double-sided length of shelves 780mm Bdodpfxevbf Ecj Akxsb maximum distance 2520mm minimum distance 350mm 22 shelves bars covered with rubber mobile construction clearance between bars 115mm