Used Angular Gearboxes for sale (4,922)

Condition: used, Synchronous servomotor with holding brake and gearbox, Lrsdpfx Akef Dlzueqjk geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 22 mm -Number: 1x gears available Lrjdpfx Aeb Uht Tjkqsk -Price: per piece -Dimensions: 180/110/H110 mm -Weight: 13.3 kg

Condition: good (used), Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 2: 1 -Drive shaft: Ø 25 x 45 mm -Price: per piece -Number: 4 pieces -Dimensions: 240/120/H235 mm -Weight: 13.15 kg Lrjdpfjfbtgmjx Akqek

Condition: used, Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 20 mm -Dimensions: 190/190/H110 mm -Weight: 11.7 kg Ljdpob Uhrwjfx Akqsrk

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Lrodpfx Ajf Dlzqekqjk Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: good (used), Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Lredpfx Akjytn U Isqek Weight kg 2200

Condition: used, functionality: fully functional, Used PIV continuously variable transmissions in stock Lrsdpfoxykzvex Akqek 2 units RSB 3 (1 unit with turbo coupling) 2 units FA2 LC2 with 3 kW 1 unit KD 355-12 V with 15 kW For further data, see nameplates All gearboxes are functionally tested

Condition: used, functionality: fully functional, Various gearboxes and geared motors "Made in Germany": Bauer, Dempewolf, Flender, KWE, PWH, SEW, WGW All gearboxes have been function tested Lodox Ez Efjpfx Akqsrk

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Ljdpoygtbmjfx Akqork Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 Lrodpsu Rv Uqsfx Akqok No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Lredpfx Akjwuucioqek Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: new, I am offering an industrial gearbox/valve actuator by DREHMO, model MSG 800-S. The device is intended for use in industrial installations – mainly for the control of valves, gate valves, and butterfly valves. Lrjdpjyz Ia Uofx Akqjk Product – new / stock item, unused. ⚙️ Technical data: Manufacturer: DREHMO Model: MSG 800-S Type: gearbox / valve actuator Application: industrial fittings (valves, gate valves, butterfly valves) Design: heavy-duty, industrial Condition: new (stock item) 🔧 Applications: water and sewage installations power industry chemical industry industrial and technological installations 📦 Included: DREHMO MSG 800-S gearbox exactly what is shown in the photos 🚚 Shipping: possible dispatch by courier or on a pallet personal collection available

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003605 - Manufacturer Code: VP40 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - Weight: 4KG - Dimensions: 20X20X20 cm - If interested, we offer a refurbishment service. Please contact us. Lrjdsyztrpepfx Akqok

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. Lrsdoyz A U Hspfx Akqok These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: excellent (used), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, year 1997 Crosscut saw, pneumatically indexed (3 kW) with laser alignment light Slotting spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal top, pneumatically indexed – 3 kW motor Feed speed adjustable from 6–12 m/min – 1.1 kW motor Screen control for 99 window types Support bar for muntin production, pneumatically indexed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Lredey Dud Ejpfx Akqjk Corner jointing unit with support rail Return conveyor to operator side Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ tool set, IV-78 THE SYSTEM IS IN VERY GOOD TECHNICAL AND COSMETIC CONDITION Delivery: EXW Delivery time: Prompt by arrangement Inspection: By appointment Payment: Upon notification that the goods are ready for dispatch Subject to prior sale and errors excepted.

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Lrodoxvc N Djpfx Akqjk Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Lrsdpfx Aexvc Rzjkqok Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels Lredpfjvnq H Ejx Akqsk 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lrsdpfxoukhd As Akqok Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: new, Year of construction: 2025, Angled Cutting for Single Boards and Packs of Boards: Efficiency and Precision Without Compromise The TRGSI, just like the TRSI, is a monoblock system designed to ensure outstanding installation speed and effective vibration reduction. A true innovation powerhouse for achieving flawless results in record time! Programmed Cutting for Single Boards and Packs Fixed Measurements and Customized Sequences: Thanks to the ability to manage various cutting schemes, it’s easy to set up fixed or sequential cuts, optimizing every operation. Industrial CNC Technology: An advanced system that allows for the quick storage of different cutting plans. Up to 25 different measurements can be managed simultaneously, with angled heads and independent options for every specific need. Customizable Cutting Programs: Work parameters (such as quantity and waste) are easy to set and can be customized according to individual preferences. Each cutting plan can be saved for quick access. Easy Program Loading: Cutting programs can be uploaded via USB in just a few steps, with files in .txt format for practical and fast management. Advanced Optimization: Two cutting versions to maximize efficiency: OL Version optimizes length, while the E Version offers total optimization, minimizing waste. Operating Dynamics Fast and Precise Movement: The steel guide with ball recirculation and dual sliding carriage, powered by brushless motors, ensures unmatched speed and accuracy. Durability and Perfect Sliding: The reinforced structure ensures optimal sliding, increasing the system's durability and reliability. Pneumatic Pusher: Equipped with fully protected and highly visible stroke, the pneumatic pusher system ensures maximum control and precision. Perfect Angling and Precision: The synchronization between the lateral arm before the blade and the pneumatic presses guarantees a perfect cut, both in quality and angle. Lrjdpfsv Iqd Rex Akqok Advanced Accessories for Loading and Unloading With dedicated accessories, the system can be configured for manual or fully automatic loading and unloading operations, ensuring an uninterrupted workflow.

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 516950, Basic data: • Manufacturer: BHS Cincinatti • Type: AD 63T • Serial number: 516950 • Year of manufacture: 1999 • Rated power: 11,700 kW • Gear ratio: 1500/7555 • Operating hours: 76,000 hours Lrsdpfx Akoy Drd Asqek Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended.

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 6131, • Rated power: 52,000 kW • Rated speed: 3,615/1,500 Lrsdpfoy Dq Hiex Akqjk Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended.

Condition: used, New: No Part suitable for: trucks Lodpfx Akeyyzupjqork Price: On request VAT/margin scheme: VAT deductible Type number: 1327031018

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes KBF / KBA 71 80 90 100 112 125 140 160 Lredpfx Akjv Uvuhsqsk Very good used and tested condition Well below manufacturer's retail price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: used, length 750/630 mm width 780/530 mm depth 470/320 mm Lsdsyycw Espfx Akqerk The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team