Used Cidan Strip Decoiler for sale (2,432)

Condition: used, functionality: fully functional, Year of construction: 2015, The mechanical CIDAN decoiler DO is an easy-to-maintain decoiler with an adjustable central shaft. Lhodpfxjx Sw U Ne Akqjf

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear Lhjdpfx Akjif Sg Seqjf - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Lhedpfx Aoyyyrmskqef

Condition: new, functionality: fully functional, Decoiler for up to 150 kg coil weight, fixed rotation speed of 10 rpm. Lodpfx Akjyyvzksqshf

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Lhjdpohx R Etsfx Akqof Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Load capacity: 200 kg Coil diameter: 900 mm Maximum strip width: 220 mm Ledpfx Aeyr Rdcjkqehf Expanding range: approx. 240 - 550 mm

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Lodpjyt Eldefx Akqohf Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller Ledpfx Aetgvgpekqjhf • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm Lhedpsxtp Eysfx Akqjf coil width: max. 120 mm

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm bundle width: max. 200 mm Lhsdpfx Aji T Ir Ajkqjf

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm Ledpfx Aji Hi Swskqshf coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z Lhodpfx Akoxvitvoqef coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Lsdpfowvv Rqsx Akqjhf Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: good (used), working width: 1,050 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, overall weight: 220 kg, working length: 1,050 mm, max. working width: 1050 mm for metal sheets up to: 2 mm opening width top clamping bar: 60 mm Lhjdpeui Ikrofx Akqof weight: 220 kg space needed: 1380 x 550 x 990 mm

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Lhjdpfeyuzcuox Akqef Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition Lodpfx Akoydk Acjqohf TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 100082MT, feed rate X-axis: 25 m/min, conveyor belt width: 1,250 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, number of blades: 5, working width: 1,250 mm, total width: 2,450 mm, total length: 11,300 mm, total height: 2,900 mm, load capacity: 1,000 kg, space requirement width: 2,450 mm, space requirement length: 11,300 mm, space requirement height: 2,900 mm, Fully functional Forstner splitting line MST 1250 with 5 knives, 6-position infeed table, 6 motorised decoilers, each with 1,000 kg capacity, manual angle cutting with rotary shear up to 35 degrees, unit for tapered longitudinal cutting (currently not operational). Lhjdpeyx Evhsfx Akqjf

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Lhodpfx Aksxwc E Isqjf The system layout PDF is shown as a mirror image!

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Lsdpfx Ajytqxpokqjhf

Condition: used, sheet width 1050 mm plate thickness 3.0 mm thickness at "Niro-steel" 1.5 mm no. of strokes 35 Hub/min cutting angle 2°30 ° engine output 3.0 kW table height 810 mm weight of the machine ca. 1150 kg. range L-W-H 1300 x 1520 x 1170 mm from a maintenance workshop (!!) Furnishing: - robust electro-motorized metal sheet shears - manual backgauge Lodpfexabllsx Akqohf - adjustable up to 610 mm, using the handwheel from the back - 1x side stop including mm scale - 2x table sheet metal support arms - Piece counter - freely movable foot switch - rear sheet metal slide - EMERGENCY stop button at the front * Machine link: ?machineno=1008-9325126

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Ledpoixz D Ujfx Akqjhf Available working lengths: 2600 mm / 3200 mm / 4100 mm

Condition: new, Year of construction: 2025, DELIVERY IN JULY. Folding machine for bending up to 3200 mm length metal sheets. Machine with warranty for customers in Lithuania / Latvia / Estonia. Technical details: - Working length: 3200 mm - Max thickness, steel: 1,5 mm - Max thickness, stainless steel: 0,9 mm - Max thickness, aluminum: 2,2 mm - Opening height: 150 mm - Clamping beam motor: 0,75 mm - Folding beam motor: 1,5 mm Machine configuration: - Control system ProLink - Prolink screen 15.6" Tool configuration: - Kit Straight rail 30° R1 - Lower beam rail Lhjdpfjitvhyjx Akqof - Folding beam rail 7/10mm - Folding beam rail 15mm Back Gauge configuration: - Back gauge EGS-30 - Standard plastic cap

Condition: new, Year of construction: 2025, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person. Lodpfxewd Emks Akqehf

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Lsdowd Ebzepfx Akqehf Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Year of construction: 2021, condition: used, DECOILER Lhsdpfogf Aaqox Akqof MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK