Used Cmc Cevenini Mandrel for sale (381)

Condition: excellent (used), Year of construction: 2007, WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film Hsdjv D If Depfx Amisl -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Condition: used, operating hours: 2,700 h, *NEW* Visit alpenlift-marktplatz! Browse – Buy – Sell For sale: Used tracked aerial work platform with 19m working height and up to 11m lateral outreach! Brand: CMC SUP 19 3040kg Hodpfjyu Tiyex Amijl Diesel & 220V Year: 2012 Optionally, a lightweight trailer can be purchased for an additional charge!

Condition: good (used), Year of construction: 2000, Brand: Cevenini ED400 Year of manufacture: 2000 Technical data: Max. log width: 1600 mm Max. roll diameter: 400 mm Min. slitting width: 3 mm Indexing tolerance: +/- 0.1 mm Accessories: - 1 knife - 1 spraying unit Hsdpfoy A S Rmox Amijl - 1 shaft D 76 mm - 1 knife sharpening device - 1 set of original documentation The machine was completely overhauled 5 years ago. New Siemens control system with visualization.

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Hodpfx Amsywdtvjijl Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 3364, product length (min.): 100 mm, product width (max.): 350 mm, product width (min.): 120 mm, product length (max.): 250 mm, production capacity: 10,000 unit/h, TECHNICAL DETAILS Min. format: 100 mm x 120 mm Max. format: 250 mm x 350 mm Maximum parcel thickness: 30 mm Film thickness: 20 to 100 µm Maximum speed: 10,000 / h Hsdpfeyzpvwox Amijl MACHINE DETAILS Voltage: 380 V, 3F+N+PE Frequency: 50–60 Hz Current consumption: 21 A Air pressure: 6 atm EQUIPMENT 1 mail feeder shuttle 3 rotary feeders Film packaging section Conveyor belt

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Hedpfx Aeyurz Usmiol Made in Italy.

Condition: excellent (used), Year of construction: 2023, operating hours: 692 h, fuel type: hybrid, color: blue, Weights Empty weight: 2.593 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.800 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 1115 m Transport dimensions (LxWxH): 5,3x0,78x1,95 Production country: IT Additional information Please contact Vink Machinery for more information Hedpfxsymyaio Amisl CMC S 18F Spider Lift * 2023 * Diesel and 230-volt drive * 692 working hours * Remote control * Automatic outrigger * Adjustable undercarriage * 18-meter working height * 11.15-meter horizontal reach * 230 kg lifting capacity * 2593 kg net weight * Includes documents

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, collet bore: 35 mm, saw blade diameter: 500 mm, overall weight: 4,500 kg, table length: 4,000 mm, positioning accuracy: 1 mm, table width: 150 mm, working range: 4,000 mm, pressure: 6 bar, type of input current: AC, total height: 1,300 mm, total length: 4,000 mm, total width: 1,500 mm, cutting width (max.): 150 mm, cutting diameter: 500 mm, extraction nozzle diameter: 135 mm, machine base height: 4,500 mm, empty load weight: 4,500 kg, operating pressure: 6 bar, counter spindle motor power: 5,500 W, CMS Scarpari Aut cube cutting machine for pallet production. Still avalable to examine in production. Hjdpsyr Hyyefx Amiol Max cubes 135x150 mm min cubes 60x50 mm

Condition: used, Year of construction: 1994, Kreuzleger - Stacker CMC ROBOT 300 PMCYear 1994 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Hjdpsh Ax Hiefx Amisl Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Huge variety of materials for high-quality cases and covers Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Hjdpfx Amev Uqpmoijl Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate Hjdpfx Amoi A Ivyjisl WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Condition: ready for operation (used), CMC 3528000M5000TAC-CR PM Servo Motor, serial no. according to photo, used, normal traces of use, 100% functional, scope of supply according to photos Hjdji D Hnxspfx Amiol

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, encoder cover has a crack see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hsdoi D Hnqepfx Amisl

Condition: ready for operation (used), CMC MTE2620-169BF PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Hedpfxsi D Hn Ao Amiol

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Hedpfxji D Hnmj Amiol

Condition: used, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 2.006 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 690 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 90 Transport dimensions (LxWxH): 4,03x0,77x1,98 Rental currency: EUR Production country: IT Hjdpfx Amjx Eg Enoisl Additional information Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2025, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 3.053 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 2.300 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 1240 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Transport dimensions (LxWxH): 5,7x0,88x1,98 Rental currency: EUR Production country: IT Additional information Please contact KEY-TEC Sales for more information Hjdpfx Amox Dg Awsiol

Condition: new, Year of construction: 2023, fuel type: diesel, Empty weight: 2.579 kg Mast: articulated arm Hjdpfxsx Dg Aqj Amiol Lifting capacity: 230 kg Working height: 1.800 cm Max. horizontal reach: 1100 m Rental currency: EUR Production country: IT Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2022, fuel type: diesel, Drivetrain Make of engine: Kubota Weights Empty weight: 2.600 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.900 cm Other information Emission level: Stage V / Tier V Max. horizontal reach: 95000 m Hodpfx Amex A R Hksiel Max swing of arm in degrees: 356 Max swing of platform in degrees: 178 Rental currency: EUR Production country: IT Additional information Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2010, Used Revised Air Compressor CMC CWA11-800 40 bar Hsdpewcf Ewofx Amijl General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperatures ranging from +1 to +35 °C. Consequently, the unit suits various environmental conditions. The system delivers an intake flow rate of 800 cubic meters per hour and reaches a maximum pressure of 42 bar. In addition, a 132 kW (180 HP) three-phase electric motor powers the compressor at 710 revolutions per minute, running on 400 Volts and 50 Hz. As a result, the compressor provides high efficiency and reliability, even under demanding workloads. Cooling System and Thermal Management To maintain optimal temperatures, the Used Air Compressor CMC uses a water-based cooling system for both the cylinders and compressed air. Specifically, copper tube and brass plate heat exchangers dissipate heat in both the intermediate and final compression phases. Furthermore, a gear-driven oil pump circulates lubricant through a dedicated heat exchanger, which enhances cooling performance. Additionally, a preheating resistor stabilizes thermal conditions during start-up. Therefore, the system reduces thermal stress and extends component life. Overall, this combination of cooling solutions ensures optimal efficiency throughout the filtration cycle. Mechanical Equipment and Functional Components CMC designed the Used Air Compressor CMC  with a base frame supported by four anti-vibration feet. As a result, operators can install the unit directly on the floor without additional foundation work. The W-type compressor block features dry cylinders and pistons with PTFE-loaded sealing rings. In contrast to lubricated systems, this configuration prevents oil contamination. Furthermore, stainless steel suction and delivery valves include automatic unloader mechanisms that support load/unload functionality. In terms of transmission, the motor and compressor connect via trapezoidal belts, which simplify maintenance. The intake side also includes a silenced filter, while a protective cage improves operator safety. Safety Devices, Monitoring, and Physical Layout The Used Air Compressor CMC integrates comprehensive safety and monitoring systems.

Year of construction: 2006, condition: excellent (used), The machine was taken out of operation and put into storage. Furthermore, it was driven as a capacity buffer and thus only little. Hjdpfencbtbex Amiel The machine is sold with some spare parts such as engine / gearbox.

Condition: used, Year of construction: 1998, machine/vehicle number: 531007, functionality: fully functional, SECOND-HAND THICKNESSER PLANER CMC MOD. SP530 - CE RULES - S/N 531007 - Year 1998 Hodpfx Amox Rqmceiel

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: Hedpfjng Exasx Amijl The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Hedondn Agspfx Amiel Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: Hodpfonh R Ekox Amiel - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site