Used Leifeld Plb 1200 for sale (4,524)

Condition: good (used), Working diameter Ø 2400mm Kdsdpfx Absucdh Tegsk Max sheet thickness: 9,5 mm

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Kdjdpfoq Dqdiox Abgek Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Kedpfxsxtaxwj Abgsdk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Manual spinning machine make Leifeld Type Plb 300 - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrics and buttons - operation new - New paintwork Technical data Tip height mm 350 Tip width mm 800 Machine length mm 2100 Spindle motor kW 4.0 4-speed gearbox Speeds approx. 1/min 200 - 1000 Spindle holder M60 DIN 800 Hand steel support Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1100 Special equipment built into the machine - Tip height mm 350 - MK 3 ball bearing pressure center - Stepless spindle speed control in the indexing steps by frequency-controlled drive motor - Electrical switching - Circulating oil lubrication On request: - Cross support PS30/300 Kdsdpfx Aordzv Rsbgek

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Kdodpfsvcfhmex Abgek Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Kdedpfxsxp Sb Ao Abgok Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES Kdodpfx Aboyy Ngmegsk – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Kdjdpsyw Ubqjfx Abgsk Advantages: Very high measurement accuracy Stable construction – heavy granite dampens vibrations Ideal for measurements, marking out, and component inspection Professional equipment Ready for use ⸻ Condition: Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg Load Capacity Welding Positioner, CE Certificate Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Turntable diameter: 1200 mm Ksdpfxsxq S Nij Abgodk Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg

Condition: good (used), Perfecta BSH5-1200 Paper Stack Lifter The device is in perfect condition. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Kdodpfx Aboywdmisgjk Automatic and manual lifting cycles, fast operation. Load capacity: 1200 kg. Pallet/sheet dimensions: 990 x 1350 mm. Documentation included.

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Ksdpfxslucaqo Abgedk Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: good (used), Year of construction: 1980, Spinning machine Kdsdpfsx Ttplox Abgjk LEIFELD Spinning moulds

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Kdjdpfxeycigkj Abgok

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Ksdpfx Aehp N Ucobgedk

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Kdodpsyfrpmofx Abgok Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,...

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Kdsdpfsxfiq Hox Abgok

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type Kdedpfx Ascudizjbgek negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: used, Year of construction: 2008, x-travel 1200 mm y-travel 900 mm z-travel 500 mm table surface area 1400 x 900 mm spindle taper HSK A 63 spindle taper DIN 69693 spindle turning speed - stepless 10.000 U/min feeds x/y/z -stepless 1 - 30.000 mm/min no. of tools in magazin 87 tool diameter max. 80 mm Kdjdey Ehwuepfx Abgok tool length - max. 300 mm weight of tools max. 8 kg table load max. 1800 kg internal coolant system feed 40 bar control HEIDENHAIN, iTNC 530 total power requirement 44 kVA weight of the machine ca. 12 t Accessories/Equipment: chip conveyor, solid clamping table, tool breakage monitoring, oil emulsion mist extraction, electronic thermal compensation (i)TNC, electronic hand control (i)TNC, blow-off device, Rotoclear, Blum Laser A 3

Year of construction: 2007, condition: ready for operation (used), overall weight: 14,750 kg, This 3-axis Friggi VTS 4100 X 1500 X 1200 HS was manufactured in 2007. It features a maximum blade length of 11470 mm and blade dimensions of 41 x 1.3 mm. The band rotation speed ranges from 400 to 2300 m/min, and the blade motor power is 45 KW. If you are looking to get high-quality cutting capabilities, consider the Friggi VTS 4100 X 1500 X 1200 HS machine we have for tact us for more information. Electrical • Supply voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Installed power: 58 kWCutting and dimensions • Cutting capacity (L × W × H): 4100 × 1500 × 1200 mm • Max. blade length: 11,470 mm • Blade dimensions: 41 × 1.3 mm • Band rotation speed: 400–2300 m/min • Blade motor power: 45 kW • Flywheel diameter: 1000 mm • Table axis: 4100 mm Kdjdpex D Hrxefx Abgek • Stop axis: 1500 mm • Band axis: 1200 mm • Table feed speed (manual cycle): up to 5000 mm/minHydraulic system • Reservoir capacity: 150 L • Pump flow rate: 40 L/min • Pump motor power: 9 kWColor coding • Structure: RAL 7039 • Flywheel covers: RAL 7021 • Moving parts: RAL 2004

Condition: excellent (used), COLLATING MACHINE DUPLO COLLATOR DC-1200 & DC-12ST Kdodpfxeyy Ixno Abgsk Consisting of: Duplo Collator DC-1200 // Ser.No.: 60718856 // Stations: 12 DC-12ST // Ser.No.: 61029010

Condition: excellent (used), Year of construction: 1995, Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Kjdpfx Aswgkyzobgedk Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2026, overall weight: 35 kg, total length: 700 mm, total width: 1,200 mm, total height: 850 mm, Work Table AT 1200 with Stainless Steel Top and Sliding Doors TOP work table for gastronomy or bakery use Stainless steel worktop Kedpfx Abjyhy Imjgodk Lower storage shelf Stainless steel design with 2 sliding doors Dimensions approx.: 1200 x 700 x 850 mm (W x D x H) Used unit, as new Options: Delivery service New castors / wheels Come and visit us!

Condition: ready for operation (used), Year of construction: 2011, clamping force: 11,772 kN, screw diameter: 130 mm, injection weight: 6,210 g, overall weight: 70,000 kg, Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details. Injection Unit • Injection unit size: 8300 • L/D ratio: 20 • Shot volume (theoretical): 8,630 cm³ • Max injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticizing capacity (HDPE): 140 g/s • Heating capacity: 79 kW • Temperature control zones: 5 + 1Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke with minimum mould height: 2000 mm • Opening stroke with maximum mould height: 1400 mm • Mould height: 600–1,200 mm • Max daylight: 2,600 mmPlaten & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Distance between tie bars (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm Kdsdey Dua Topfx Abgsk • Ejector force: 226 kN • Ejector stroke: 300 mmPower & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 LPerformance • Dry cycle: 10 s

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation Kdsdpfxoy Azv So Abgjk

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection system | KRONES | Checkmat Kdedpfjy Azu Uex Abgjk