Used Olimpic for sale (29)

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: AC, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,600 mm, total length: 3,600 mm, total width: 900 mm, overall weight: 700 kg, Equipment: documentation/manual, One sided edgebanding machine SCM Olimpic K360. Second owner, both were small worshops, so limited usage and well preserved. Regularly maintained by authorised service. Main parameters: panel thickness 8 - 60mm, edge thickness 0.4 - 3mm (up to 10mm for solid wood) Main features: - pre-milling station - gluing station - feed magazine - pressure section - end-trimming unit - top and bottom trimming unit - corner rounding unit - scrapping and buffing units - controller with LCD panel - extra glue container Dsdpfx Aoz I U S Ssb Njwc

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Dwsdpfxozbc Ede Ab Noc Handover in the current condition as inspected, without warranty

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 2933751040F, functionality: fully functional, operating hours: 3,940 h, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, actuation type: pneumatic, total length: 2,540 mm, total width: 1,485 mm, overall weight: 670 kg, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, We are offering this very well-maintained SCM OLIMPIC K201 edge banding machine, manufactured in 2005. Machine features: with pneumatic trimming unit, flush-cutting unit, radius/flush-routing unit, radius-pulling blade unit, polishing disc unit. Price: 4,900.00 EUR net ex works Rodgau plus VAT, loading costs and shipping. If you have any questions or require further information, please feel free to send us a message or call us. Dwedpfx Abszmxxis Nsc

Condition: used, Year of construction: 2022, functionality: fully functional, Equipment: CE marking, Machine is USED, excellent condition, first owner. Machine can be packed and ready for transport from Sellers warehouse in Croatia witihn 5 days after order confirmation ! Dwedezv Tibepfx Ab Nec OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - Electronic positioning of top presser - Panel spacer on infeed fence - "Nesting" copying device kit - "AAR" anti-adhesive unit - Spray-mist device for edge finishing - Spray-mist device for delicate edges - RC-N glue scraping unit - "SP-V" brushing unit 1 - "EASY SIZE" device - Infrared ceramic lamp - Gluing unit with pre-melting device - "SGP" glue pot with automatic dosing by NC in substitution of the standard one - Diamond tools for pre-milling unit h=64-no.2 knives TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Dodez N Swpspfx Ab Nowc Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: good (used), Year of construction: 2008, machine/vehicle number: 082429, functionality: fully functional, overall weight: 1,260 kg, year of last overhaul: 2025, Equipment: CE marking, SCM Olimpic K500 – Edge Bander – Year 2008 For sale: SCM Olimpic K500 edge bander, year 2008. Reliable and robust machine, ideal for joinery workshops and industrial production. ✔️ Fully functional ✔️ Ready for use, requires no work ✔️ Always carefully maintained Dwedpfsy Sph Iox Ab Noc ✔️ Excellent overall condition The machine will be available from June. Perfect solution for those seeking a professional edge bander that is immediately operational. 📍 Inspection and test operation available upon request. 📞 For more information, please do not hesitate to contact us.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Dwodpfx Aszuyk Nob Njc Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: AH/115881, functionality: fully functional, overall weight: 2,364 kg, Equipment: documentation/manual, Element thickness: 60 mm Edge thickness: 8 mm Feed speed: 18 m/min Soundproof cabin: Yes Glue tank: Yes Touchscreen control (10 inches) Height adjusted manually from the control panel 4-axis milling machine, manually operated from the panel Dwodpfx Aeytkczob Nsc Cross cutting Two wrapping units, profile scraper

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. Dedezgwzvspfx Ab Nswc – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: excellent (used), SCM Olimpic K100 edge banding machine pre-milling cutters, glue application using a roller, The glue pot has an exchange function. pneumatic pre-trimmer, pressure rollers, Dedpfx Ajz E U Hdjb Newc front and rear trimming cutters, R1 – R2 top and bottom milling unit, profile trimming, flat trimming, machine length 320 cm, feed rate 7 m/min, max. workpiece height 50 mm, max. edge thickness 3 mm.

Condition: used, functionality: fully functional, edge thickness (max.): 3 mm, Used Single-Sided Automatic Edge Banding Machine The SCM Olimpic K208 is a reliable, industrial-grade automatic edge banding machine designed for precise and continuous edge processing of furniture panels and other wood-based boards. It is suitable for processing melamine, PVC, veneer, and coiled edge materials, making it an excellent choice for carpentry workshops, furniture manufacturing facilities, and small production lines. Key Features Type: Single-sided automatic edge banding machine Manufacturer: SCM Group, Italy Model: Olimpic K208 Application: Edge banding of furniture panels and wood-based boards Processable edge materials: Melamine, PVC, veneer, coiled edge banding Technical Specifications Panel thickness: 10–55 mm Panel thickness with profiling unit: 10–45 mm Edge band thickness: approx. 0.4–10 mm Dsdpfx Aoy Iwu Ueb Newc Minimum workpiece length: 140 mm Feed speed: approx. 11 m/min Minimum workpiece width: depending on configuration approx. 100–130 mm (in some listings as low as 65 mm) Standard Equipment Glue unit End trimming unit (front and rear) Top and bottom trimming / milling unit Corner rounding unit (on certain configurations) Scraping and polishing unit Upper pressure beam Chain feed system The SCM Olimpic K208 is a compact yet efficient solution for edge banding operations. Its robust construction, continuous feed system, and the well-known reliability of SCM machinery make it an ideal choice for daily industrial use, particularly in panel-based furniture production.

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons Dwjdpfx Abszcpixj Nsc

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension Dwjdpfxsttakhj Ab Nsc - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Dwjdorx S Ipspfx Ab Njc Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, Year of construction: 2008, machine/vehicle number: AA/H113802, SECOND-HAND EDGE BANDER MACHINE SCM MOD. OLIMPIC 500K "T-E" - (CE) - Pre milling unit Dwjdper Iynbsfx Ab Nec - Gluing unit with pre-melter - End trimming unit with double blade - Trimming unit - Edge scraping unit - Glue scraping unit - Brushing unit - Year 2008 (CE)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Dodsw Nadgjpfx Ab Nswc Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: good (used), Code: 0450 Brand: MABO - ITALY Model: OLIMPIC - CE Standard Belt sanding machine for wood, joinery, furniture, wooden joinery, metals, stainless steel, aluminium and other materials – CE Standard Technical data: Work surface length 2500 mm Work surface width 600 mm Table height adjustment by handwheel Belt width 120 mm Dedozmywmspfx Ab Nowc Motor power 2 Hp Speed 2820 rpm Dust extraction inlet diameter 110 mm Overall dimensions mm 3000 x 1200 x 1600 h Weight kg 230

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Dwedpfx Ajza U H Reb Noc Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT Dsdpoyll Snefx Ab Nswc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Dsdpsnwkbcofx Ab Nswc Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,200 h, functionality: fully functional, total height: 3,250 mm, total width: 2,000 mm, total length: 7,870 mm, type of input current: three-phase, input voltage: 400 V, pressure: 90 bar, operating pressure: 90 bar, power: 120 kW (163.15 HP), compressed air connection: 6 bar, control voltage: 400 V, overpressure (max.): 100 bar, input frequency: 50 Hz, Sterilizer for natural and concentrated fruit and vegetable purees. Max. product infeed 5- 10,000 kg/h, depend of the product, sterilization temperature up to 110°C , holding time up to 120s. Steam consumption 2100kg/h. Complete with buffer tank 5000L, screw pump, piston pump, vacuum pump and filling machine MakropackTM2000_3 for aseptic filling of 220-liter bags. Dedpfxjzpx Sho Ab Njwc

Condition: used, Year of construction: 2004, PLC control Dwodpfx Abju Tyx Aj Njc Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, operating hours: 336 h, edge thickness (max.): 8 mm, total length: 4,764 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! Dedpfsydc Abex Ab Nswc TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included Dwedpjyux Risfx Ab Nsc 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm Dodpjymautjfx Ab Njwc - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min