Edge banding machine with grooves

SCM Olimpic K 1000

Condition: used, Year of construction: 2009, Used SCM edgebander model OLIMPIC K1000 Control panel with membrane keyboard Technical data: Min. panel height: 8 mm Max. panel height: 55 mm Min. edge thickness (roll): 0.4 mm Max. edge thickness (roll): 3 mm Max. edge thickness (solid wood): 12 mm Configuration: Strip edge magazine Glue pot capacity 1.5 kg, with independent motor No. 4 pressure rollers with pneumatic feed, first roller with independent motor Edge roll guillotine End trimming unit with 2 independent motors, tiltable 0-15° - each 0.35 KW - 12,000 rpm Rsdpfxsxrndxe Ag Isp Overlapping trimming unit with 2 motors, each 0.65 KW - 12,000 rpm - tools with reversible knives Tiltable corner rounding unit for flat/radius finishing; 2 motors each 0.5 KW - 12,000 rpm, electro-pneumatic positioning - tools with reversible knives Electro-pneumatic exclusion of the unit Glue scraper unit Machine length: 4,310 mm Year of manufacture: 2009 CE marked

Condition: excellent (used), Biesse Stream 5.5 A Edgebander Mileage: 246,000 m Top pressure belt, fluids Pre-milling cutters, Glue application, Pre-melter for PUR adhesive Rsdpfxjxxlqve Ag Ijp The glue pot is equipped with a glue drain Pneumatic pre-cut guillotine, Pressure rollers fluids Flush trim saws, Top and bottom trimming unit with straight cutters Top and bottom multi-cutter trimming unit Two corner rounding units Fluids Profile scraper (multi R1-R2), Cleaning fluids Flat scraper, Polishing unit, The machine is equipped with NC control for routers and a pneumatic package, Max workpiece height 60 mm, Max edge banding thickness in roll: 3 mm, Feed rate: 12, 18 and up to 20 m/min The machine is in very good condition.

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit - scraper Roded Inktepfx Ag Ijp - buffing unit

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Rsdpfxjwlbxlj Ag Iop Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Redpfsmt Hhwex Ag Ijp Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers Redpswkf Ihjfx Ag Iep - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Rodetu T I Uspfx Ag Isp Loading possible Request more information

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Rjdpet Hal Dsfx Ag Iop Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: good (used), functionality: fully functional, Tested, functional equipment, used edge bander BIESSE Polymac model LATO 38 - Glue pot - Guillotine - Front/back trim - 1 tiltable top/bottom flush trimming - 2 tiltable top/bottom flush trimmings - Exit brushes Possibility to test at our facilities Rodjuhm Adspfx Ag Ijp Machine visible in our Cosne workshop Price includes loading onto truck

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Rodpfxjvwbp Ae Ag Isp