Used Memmert Uf 450Plus for sale (2,365)

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Kdsdpeyzzm Ijfx Abgjk Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) Kdedpfx Aeymm Ersbgok - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, industry, research, development as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Kjdpfx Aoy D Ni Aobgsdk Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Condition: ready for operation (used), Memmert SFE 600 heating furnace max. 70°C For further technical data see pictures. You are welcome to come by for an inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Ksdpfjip Um Aex Abgsdk Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: new, functionality: fully functional, Memmert VO500 & PMP500 Vacuum Oven Both devices are brand new & unused. Purchased for a project in a pharma plant in Cork, IE, but the project was cancelled before completion Kdjdpfx Aoym Aruobgsk

Condition: used, Manufacturer : Memmert Model: B 30 Type : universal oven / incubator   Maximum temperature : 70°C Kdsdex R Aulspfx Abgsk Power : 800 W Total volume : 48 L Inside dimensions : 380 x 300 x 380 mm

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco climate chamber. Chamber directly from the manufacturer, fully tested and functional. Climate chamber ICH 750L, 115 V, lighting module ICH Q1B option 2, light intensity 8000 lux, 4 fluorescent tubes with cool white light – 2 tubes with UV lamps. Temperature range from -10°C to +60°C without humidity, with humidity 0-60°C, RH 10–80% – ICH750L. Kdjdjymy Utspfx Abgsk Included: software on USB stick.

Year of construction: 2002, condition: excellent (used), Steam Boiler Used Manufacturer: LOOS Type: UF Year of construction: 2002 Steam capacity: 600 kg/st Operating overpressure: 6 bar Burner Weishaupt WG40N/1-A Design: ZM-LN Kdjdpfjizxbujx Abgjk Power: 55-550KW Year: 2002 Connection pressure: 15-500mbar. Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: good (used), Memmert B60 Incubator Kodpfxjxlq Nko Abgjdk For sale is a used B60 incubator from Memmert. Technical details: Manufacturer: Memmert Model: B60 Design: Incubator / Heating Cabinet Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Areas of application: Laboratory, research, industry, medicine Condition: Used, functional Buy Memmert B60 incubators and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: good (used), Memmert precision incubator, 256 liters Manufacturer: Memmert Model: ICP 600 Temperature: 0°C to 60°C Volume: 256 liters Kdjdpfjxal Ukox Abgek Power: 700 W Interior width: 800 mm Interior height: 640 mm Interior depth: 500 mm Device width: 958 mm Device height: 1335 mm Device depth: 656 mm Max. number of shelves: 7 Max. load per shelf: 30 kg Max. load per device: 80 kg Weight: 144 kg You can find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: B115.0548, Technical characteristics: Core Specifications - Temperature range: +20 °C to +300 °C - Temperature control: PID microprocessor with single display (TFT color screen) - Sensor: 1 × Pt100 DIN Class A, 4-wire circuit - Setting accuracy: • Up to 99.9 °C: 0.1 °C • From 100 °C: 0.5 °C - Volume: 32 litres - Internal dimensions (W × H × D): 400 × 320 × 250 mm - External dimensions (W × H × D): 585 × 704 × 434 mm - Max. load capacity: 60 kg (20 kg per shelf) - Number of shelves: 1 stainless steel grid (max. 3 possible) Ventilation & Heating - Circulation type: Natural convection - Heating system: Four-sided large-area heating - Fresh air control: Electronically adjustable air flap - Vent connection: With restrictor flap Electrical & Environmental - Power supply: • 230 V, 50/60 Hz, approx. 1600 W • 115 V version also available - Ambient temperature range: +5 °C to +40 °C - Humidity tolerance: Max. 80% RH, non-condensing - Altitude limit: Up to 2,000 m above sea level Control & Safety - Timer: 1 minute to 99 days - Set point WAIT function: Timer starts only after set temperature is reached - Overtemperature protection: • Electronic monitor • Mechanical safety limiter (TB), DIN 12880 Class 1 - Calibration: 3 user-selectable temperature values - Documentation: Atmo CONTROL software via USB or Ethernet - Interface languages: English, German, Spanish, French Construction & Materials - Interior: Stainless steel, electropolished - Exterior: Textured stainless steel (rear panel: zinc-plated steel) - Door: Fully insulated with 2-point compression lock - Net weight: ~45 kg This oven is ideal for drying, heating, ageing, and hardening processes in research, quality control, and industrial laboratories. Kodpfsyana Dox Abgodk Machine status: WORKING

Condition: ready for operation (used), Memmert ULP 600 Universal Oven Nominal temperature: 220 °C Internal dimensions: 800 x 500mm x 640mm (W x D x H) External dimensions: 1200mm x 750mm x 1600mm (W x D x H) Without trolley: 950mm x 650mm x 920mm (L x W x H) With trolley: 1000mm x 660mm x 1750mm (L x W x H) Kdjdpoxxlawefx Abgek Weight: approx. 175 kg You are welcome to visit for an inspection. We can also arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided you have a valid VAT ID number. Sale subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description may occur and are subject to change.

Condition: good (used), feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, 5-axis machine Feed rate stepless: 2-4000 Total power requirement: 20 kW Kdodpfxoy Dcq To Abgek Machine weight approx.: 7 t Space requirement approx.: 7 linear meters

Condition: repair required (used), functionality: not functional, GEA UF pipes and pumps from complete unit! Various pipes, pumps, tanks, etc. One pipe system for UF line 6" + 4" with 5 APV pumps. 1. 36 pieces 6” pipes, L 3.2 m 2. 42 pieces 4” pipes, 5.2 m 3. 5 APV W+ pumps We can send more photos. Sale only as a complete set as shown in the photos. Without control unit. Kdedpjyvit Esfx Abgsk

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Kedpfxsvvi Tto Abgodk

Condition: good (used), Year of construction: 1995, functionality: fully functional, SHW UF 31, year of manufacture 1995, Heidenhain TNC 415 B control, travel X/Y/Z 1000/700/625 mm, feed rate X/Y/Z 2,000 mm/min, rapid traverse X/Y 4,000 mm/min, rapid traverse Z 2,000 mm/min, rotary table feed up to 4 rpm, main drive 20 kW, tool holder SK 50, programmable milling head, swivel time horizontal/vertical 6 sec, NC rotary table, spindle speed stepless up to 2,500 rpm, spur gearing, milling head swivels +/- 90°, quill manual 115 mm, quill motorized 100 mm, electronic handwheel, connected load 35 kW, milling spindle bearings replaced in 2025. Kdodpfx Asyx Un Tobgok

Condition: used, Year of construction: 1977, Technical details: x-travel: 450 mm y-travel: 200 mm z-travel: 400 mm spindle taper ISO: SK 30 distance table/horizontal spindle: max. 400 mm cross rail adjustment - horizontal: 400 (manuell) mm range of revolution per miute: horizontal: 30 - 1275 / 18 step U/min spindle taper: horiz.+vertikal: SK30 distance between table/spindle: vertikal: max. 430 mm quill travel: 60 mm swival range +/-: 90° Grad range of revolution per miute: Vertikalspindel: 50 - 215 / 18 step U/min clamping surface area: 860 x 240 mm table swivable approx.: 45° feed:: 0 - 1.000 / steples mm/min rapid traverse: 2.000 mm/min. Kodpjvc Awfjfx Abgedk total power requirement: 6,0 kW machine weight approx.: 3100 kg dimension machine xH: 1,6 x 1,6 x 1,9 m Coolant device 3-way DRO Heidenhain control panel Optional accessories *

Condition: excellent (used), Year of construction: 2016, SHW UF 5 Travels Kdodpfx Absh Rh T Hogjk - X-axis (rotary table): 1,500 mm - Y-axis (headstock vertical): 1,300 mm - Z-axis (headstock horizontal): 750 mm Control system - CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head (change between horizontal and vertical machining) quill 120mm Milling spindle holder SK 50 speed 2500rpm Year of manufacture 1994 - 2016 general overhauled Stepless NC rotary table - Rückle PKTF 55 - Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Kjdpfx Ajvfm I Tjbgedk Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: excellent (used), Manufacturer: SHW Machine tools Type: UF 21 / UF 31 Travel distances X,Y, Z: 1000, 700,625mm Kdedpfeftc Uxsx Abgek Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Sleeve 120mm Milling spindle holder SK 50 Speed 2500 rpm As we offer several machines of this series, the pictures advertised are only sample pictures of comparable machines. Please send us your individual (control, table size, tilting & tilt) equipment, etc.) request, so that we can offer you a machine suitable for your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is an independent specialist for SHW milling machines. Our main focus lies in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Our services: - Used machines - Spare parts - Customer Service - Machine Service - Machine overhauls - Control system modernisation

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Technical Data Travel Distances • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control System • CNC Control: Heidenhain TNC 415 Feed Rate • X, Y, and Z axis infinitely variable: 2 – 8,000 mm/min Kedpfxeyf Ai Ro Abgedk Universal Milling Head in Orthogonal Design • Swivel range of milling head mount (motorized): 340 degrees • Swivel range of milling head: 180 degrees • Tool holder: SK 50 Year of manufacture: 1992 Inspection: 2025 The machine has been recommissioned and tested by MBM and can be demonstrated under power at D-73479 Ellwangen. About Us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our range of services includes spare parts delivery, on-site customer service, machine overhauls, and control system upgrades. Our Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ____ Used machine – used milling machine – used moving column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used CNC milling machine – used boring milling machine – used metal milling machine – used metal mill – used metal milling machine – used CNC mill – CNC milling machines – milling machine – large part machining – CNC large part machining – SHW – UF6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Year of construction: 2010, condition: excellent (used), functionality: fully functional, For sale is a DSS / Tetra Pak Ultrafiltration/Microfiltration System, Model UF/MF 6338 (Pilot) from 2010. The installation is in excellent condition, fully operational, and ideal for pilot trials, product development, and replicating industrial process conditions on a smaller scale. Manufacturer: DSS / Tetra Pak Model: UF/MF 6338 (Pilot) Year: 2010 *Feed capacity: up to 3,550 l/h Retentate flow: approx. 2,200 kg/h Permeate flow: approx. 1,000 kg/h Kedsyka Stspfx Abgedk Number of filters: 6 pcs. Includes Alfa Laval heat exchanger, 3 sections Feed pump: 5.5 kW, Alfa Laval LKH 25 Booster pump: 18.5 kW, Alfa Laval LKH 50 Condition: very good, fully functional * The technical specifications listed are for processing cream into mascarpone. The UF/MF 6338 pilot plant impresses with its robust design, reliable Alfa Laval components, and a practical process configuration. With six filter elements and an integrated three-section Alfa Laval heat exchanger, it enables stable, temperature-controlled filtration—perfect for applications requiring reproducible results and flexible parameter adjustment. This system is particularly suitable for dairies and food producers seeking to test or optimize filtration processes (UF/MF) or develop new products—utilising technology from the DSS/Tetra Pak sector.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. Kdjdpfxjqzx Dbs Abgjk 7 packages; Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Kdedpfeyi E Udex Abgek Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp - Coolant device - Machine feet

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes Kodpfsu Ndd Rjx Abgsdk stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *