Used Roll Seam Welding Machine for sale (70,217)

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl Klsdpfx Ajtxl Ivjmzer throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V with 2-step switch (high/low range) Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Main switch Synchronous welding control unit 8036 Weight: 635 kg Example photo Machine is still being refurbished

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN with 2-step switch and auxiliary control with thyristor power stage and Ksdsdx Suhepfx Amzslr Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. Kjdpfx Amsw S Exuezjlr All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Kedpsdmbp Ujfx Amzelr Speed - 100 nails/sec. ( frequency regulator ) Management - PLC Simens S5

Condition: used, plate thickness 4,0 mm roll diameter ca. 120 mm throat 450 mm Klsdpfx Asy D A Eqsmzjr weight of the machine ca. 0,48 t dimensions of the machine ca. 1,3 x 0,8 x 1,8 mm

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation Ksdpfxjxaaf Ro Amzelr - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop Kjdpfexacilex Amzjlr - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Ksdpfxsxachzs Amzjlr Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, plate thickness 2.5 mm throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts Kjdsxaaw Hepfx Amzolr - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal Klsdpfxodz Sq Eo Amzjr For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: new, plate thickness 4 mm roll diameter 125 mm throat 200 mm Klsdpoynnkfefx Amzer total power requirement 2,2 kW weight of the machine ca. 0,48 t dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set

Condition: new, plate thickness 0,8 mm throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Kljdsht R Hmspfx Amzer Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. Ksdsq U N T Ropfx Amzjlr It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: as good as new (ex-display), Year of construction: 2018, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm Manual bead bending machine Description: - Heavy-duty and stable cast iron construction - Adjustable lower shaft - Special steel shafts Kledpfxoraqhxs Amzsr - Built in accordance with CE standards

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Kljdpfjxabmcsx Amzjr Furnishing: - various replacement rollers - hand crank - front stop

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm Kljdpfx Amsxaazlozjr distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Kljdpfx Ameu Izq Sjzer

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: Klsdpsu Nkxhefx Amzsr swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Klsdpexlr Tdjfx Amzjr Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: new, plate thickness 4 mm roll diameter 125 mm throat 200 mm total power requirement 2,2 kW weight of the machine ca. 0,48 t dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment Kledjd Iim Aepfx Amzsr • With 4 roller sets

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm Klodpfxjfv H Edo Amzsr total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, plate thickness 1,25 mm throat 130 mm total power requirement 0,75 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,1 x 0,6 x 1,2 m Flanging machine is equipped with: Ksdpfsvn U Dnsx Amzjlr - Emergency switch - Footswitch - 8 pcs. Roll sets

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards Kljdpfxsu Tqhho Amzjr T. Becker

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: Ksded Iimzepfx Amzslr • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Klodofv H Ehepfx Amzer Delivered with: • manual version • 4 set of wheels • Foot control • Brake motor • Emergency stop