Flanging and Seam Rolling Machine

WMT RM 8

Year of construction: 2009, condition: good (used), machine/vehicle number: 4495678, Offer 18336 Portable WIG-DC welding machine on a transport trolley Technical data: - WIG – DC + electrode welding - Welding current continuously adjustable for WIG welding from - 5 A - 10.0 V to 150 A - 22 V, 35% duty cycle - 100 A, 100% duty cycle - Connection: 220 V / 50 Hz, 15 A - Includes: - 2-cycle / 4-cycle function - HF ignition - Welding current decay setting - Gas pre-flow and post-flow regulation - Hose pack, 4.5 m length, lightweight design - Ground cable - Pressure reducer - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas cylinder holder, W 550 x H 900 x D 560 mm - Weight of transport trolley: approx. 10 kg Njdehq T N Dopfx Alcewh

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs Nodpjx Hyhbofx Alcewh • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: good (used), Year of construction: 1992, machine/vehicle number: 9207102, Offer 12001 Technical data: Nwsdoi Hpmtepfx Alcjh - Material thickness: 1.25 mm - Max. overhang: 180 mm - Center distance between rollers: 63 mm - Max. material thickness with a tensile strength of 40 kg/mm²: 1.25 mm - Working speed, approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW - Space requirement, approx.: W 550 x H 1250 x D 1000 mm - Weight, approx.: 120 kg - Includes: - E - foot pedal

Condition: new, Year of construction: 2025, Genie GR20 Runabout vertical mast work platform, new, used, demonstration machines available Njdpferh D R Aox Alcowh

Condition: new, Year of construction: 2026, Folding machine with exchangeable segments. Its simple construction ensures comfortable handling. Machine characteristics The folding machine has exchangeable segments on the upper and lower part. It gives extremely broad use for big elements as well as details folding. The segments are made of pressure iron castings, resistant to deformations and of exceptionally high strength. A simple construction secures high operation comfort and a broad range of practical use. The smallest segment possible to clamp is of 25 mm size and the biggest is of 270 mm size with a possibility of place change enable folding of any shape in the quality to be achieved. The sheet metal maximum thickness is 2 mm and the possibility of opening adjustment up to 48 mm make that there is practically no limits for this model. Segment dimensions 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 75 mm 100 mm Nedpfjmtwtmjx Alcewh 150 mm 200 mm 250 mm 270 mm Technical data WORKING WIDTH 1270 mm MAXIMAL SHEET METAL THICKNESS 2,0 mm MAXIMAL OPENING LENGTH 48 mm BENDING ANGLE 0° - 135° NUMBER OF SEGMENTS 12 pieces DIMENSIONS 1710 mm x 750 mm x 1420 mm WEIGHT 422 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: Nedpfxefv H Ede Alcswh - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: good (used), Year of construction: 2007, machine/vehicle number: 05542, Offer 25128 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 68 kVA - Reach adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding values: sheet steel approx. 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water quantity: 4 l/min - Connection: 400 V Njdjwn Emljpfx Alcewh - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling device

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, CMS AURA automatic vertical dry seaming machine Max. working height: 2.700 mm Glas-Thickness: 4-22 mm Max. Glaslänge: 3.100 / 4.500 mm Stand-Alone or integrated into the ISO Line Nwjdpfx Aljwd Ihqecoh Very easy operation with nearly no maintainance.

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Nwedpfermkfnox Alceh Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM:1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Njdpfx Alewzimcjcewh Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.