Used Sinocox.eu Generator for sale (9,977)

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Hodjv Uag Ijpfx Afwenk

Condition: new, Year of construction: 2025, color: black, power: 1,000 kW (1,359.62 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, Sinocox.eu delivers quality alternators from 8.1 to 2400 kVA. We have especially attractive offers for 670, 800 and 1250 kVA. Delivery from stock. Looking for a high-quality alternator and a knowledgeable team to support you? Please contact us. Hsdpfxjyt Ez Sj Afwjnk

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Hedpfxsyl Nnto Afwsnk

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Hedox U Tgmjpfx Afwonk Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Hnjdpfx Afsxfrv Ejwok Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Hnodpew U N Daefx Afwjk

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Hnodporuakgjfx Afwok Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Hodpfx Aexaqa Ssfwsnk Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Hnodoxdfazepfx Afwjk Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Hsdpfx Afjxdfa Ujwjnk Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Hnjdpfxertrykj Afwek Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. Hnjdsyt Rc Iepfx Afwek - Not suitable for medical oxygen.

Condition: good (used), Year of construction: 2014, operating hours: 246 h, functionality: limited functionality, overall weight: 3,000 kg, fuel type: diesel, color: green, power: 176 kW (239.29 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 176 kW (239.29 HP), nominal power (apparent): 220 kVA, continuous power: 163 kW (221.62 HP), continuous power (apparent): 203 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo mPenta, type of cooling: water, Brand: Pramac Model: GSW220V Year of manufacture: 2014 Serial number: PEE2563417 Operating hours (read): 246 Capacity (kVA): 220 - 202.8 Capacity (kW): 176 - 162.2 Engine brand: Volvo Penta Engine model: TAD733GE Hnjdpoy A Iuuofx Afwok Fuel: Diesel Alternator brand: Mecc Alte Alternator model: Eco38 2S Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 317.6 Dimensions LxWxH (mm): 2650 x 1180 x 2450 Weight (kg) approx.: 3000 Units in stock: 1 Made in: Spain Comments: Ex-emergency set in good condition

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm Hjdpfsyh Rmtjx Afwonk pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor Hnedpfjyh Rmmsx Afwjk -Technical documentation

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 Hnjdpfx Afot S Ny Ujwek 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 installed in container

Condition: used, Year of construction: 1992, SCANIA DS9 56 engine - variant A20T LEROY SOMER generator LSA 46M3S Hnedpstphzdsfx Afwsk 140 kW / 175 kVA / 400 V / 1500 rpm

Condition: used, functionality: fully functional, Working area: approx. 800 x 4,000 mm multi-stage pre-screen bar grate drive 2 x 4 kW VIMARC Hedpfx Aew Dzwfjfwonk with steel construction and feed hopper

Condition: used, Year of construction: 2023, operating hours: 8,973 h, machine/vehicle number: ESF372667, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Hnsdpfjyz Iyusx Afwsk Empty weight: 1.039 kg Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 12,298 h, machine/vehicle number: ESF372638, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Hnedpeyzl Hxefx Afwek Please contact PFEIFER GROUP for more information

Condition: used, This listing is for Peak Scientific Nitrogen Generator Corona 1010 + Corona compressor The unit is in full working condition and ready for immediate use Designed to provide a consistent, high-purity nitrogen supply for LC-MS applications. Compact and efficient, the Corona 1010 with integrated compressor ensures reliable performance and reduced reliance on gas cylinders in laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory Hsdpfx Ajy Dp A Asfwsnk

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 5,200 kg, fuel type: diesel, color: beige, power: 513 kW (697.49 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 408 kW (554.72 HP), nominal power (apparent): 510 kVA, continuous power: 368 kW (500.34 HP), total length: 4,460 mm, total width: 1,606 mm, total height: 2,493 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS diesel generator set - stationary Type: DW 460 DO2 15 AK14A PRP output: 368 kW / 460 kVA ESP output: 408 kW / 510 kVA Operating hours: 1 Engine: DOOSAN DP158LC Power standby: 513 kW Speed: 1,500 rpm Operating voltage: 24 V Cooling: water-cooled Generator: Mecc Alte ECO 40-3S/4 B Voltage: 400/231 V Voltage regulator: DER-1/A Control panel: DSE 7320 - automatic emergency power supply Dimensions: 4460 x 1606 x 2493 mm (LxWxH) Weight: 5200 kg Equipment: Battery charger 5 Amper, battery disconnect switch Hnjdpjua Tl Ajfx Afwsk

Condition: excellent (used), Year of construction: 2016, operating hours: 160 h, functionality: fully functional, nominal power (apparent): 1,100 kVA, We offer in good condition Atlas-Copco DTAS 1100 E - 110 kVA generator Year of construction: 2016 Working hours: 160 hours Hnsdpoyy Dkajfx Afwjk Fuel: Diesel Tankcapacity: 1000 liter Powered by MTU Motor. More details available on request, generator is directly available.

Condition: used, operating hours: 429 h, color: other, total length: 3,250 mm, total width: 1,250 mm, total height: 1,900 mm, Empty weight: 3.000 kg Hnsdpfx Afsym Uzbowjk Price: On request - Documentation available: No - CE certificate present: No - Serial number: - Operating hours: 429 - Transport dimensions: 3250mm x 1250mm x 1900mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), - Dimensions: 2254x1150x1680 mm - Operating hours: 1147 hours - Power: 70 kVA / 61 kW - Type: Diesel - Engine type: JOHN DEERE - Model: 4045TF150 - Rated speed: 1500 rpm - Tank capacity: 190 L - Consumption (at 75% load): L/h - Voltage: 230/400 Volt Hodpfx Afewyc Ttjwjnk - Weight: 1597 kg