Used Soukup Carpentry Machine for sale (64,562)

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Todpfxezz A Iwj Adwsc Automatic material measurement Cutting diagram for Crossline 650, 650M

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 4208 E, Makita carpentry mortise machine, type 5500 S Motor: 1,420 W, 230 volts, 50 Hz Tedoy Id Sgspfx Adwoc Longitudinal saw blade speed: 1,650 rpm Crosscut saw blade speed: 2,200 rpm Complete with R. Beck "Vario" saw and work table Workpiece length, max: 3,100 mm Adjustable angle: 0 to 45° Ex works, as inspected at the Seevetal location Excluding transport; subject to prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW, 7.5 hp Cutting height 200 mm Tilts up to 60° to the left, up to 30° to the right via hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm, cutting width when swiveled at 45°: 290 mm Swivels up to 60° to the left, up to 45° to the right Includes saw blade for wood 6,000 mm heavy-duty outfeed roller table, mounting side on the left, adjustable stop with handwheel from the machine in length, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller table, mounting side on the right Tsdpfxedxw U Io Adwjc Machine can be tilted on both sides from the front via hand crank and worm gear On request, various options are available, e.g., larger cutting height (215 mm and 240 mm), pneumatic material clamping, and laser cutting indicator With appropriate modifications, also suitable for aluminum processing The roller tables, type RLH-ST60 and RO-ST60, can be supplied in longer or shorter versions upon request.

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm Tedpjx Igzqefx Adwsc - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: good (used), functionality: fully functional, Staircase cheek milling machine, Engelhart Tsdpfx Ajzv Ehcodwoc Riser and tread milling machine, TWF 1000 Year of manufacture: 1984 400 volts, 2.8 / 3.5 kW 2 speeds: 1390 / 2830 rpm Runs in both directions (left and right) Material clamping with foot pedal Clamping dimension, max. 130 x 10 cm New pressure reducer Undercarriage Chip collection – Extraction hose Includes 16 mm milling cutter Dimensions: 180 x 100 x 180 cm Weight: 400 kg

Condition: used, Year of construction: 1994, machine/vehicle number: 9400207, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 13,000 mm, workpiece width (max.): 280 mm, workpiece height (max.): 160 mm, actuation type: electric, total length: 21,000 mm, Equipment: CE marking, documentation/manual, The AUER Unicapp CNC woodworking line is fully functional for standard woodworking tasks; it can process KVH and BSH timber in full lengths (13m). A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. Demonstration and testing are possible. The maximum working height and width of the processed timber are 26/24 cm. The machine has a crosscut saw, mortiser, drill, dovetail milling cutter, rabbeting and tenoning milling cutter, and an automatic feeder. More information is available by phone. The machine software is still supported. The total length of the machine is 21m and it requires a main circuit breaker of 3x50A. Technical data: AUER UNIKAPP – woodworking processing line (Abbundanlage / Zimmerei-Bearbeitungszentrum) Manufacturer: Ervin Auer Maschinenbau, Abtenau (Austria) Tedjzz Tv Eopfx Adwec Successor company: AUERTECH GmbH & Co KG (Lindenthal 63, 5441 Abtenau, Austria) Type: UNIKAPP Category: Woodworking processing center (woodworking line) Power: 30 kW Voltage: 380 V Serial number: 9400207 Year of manufacture: 1994 Max. workpiece width: 280 mm Max. workpiece thickness: 160 mm Total number of units: 5 Saw units: 1 Drilling units: 1 Milling units: 2 Mortising units: 1 Workpiece feeding: using clamping jaws (sliding carriage with pneumatic/hydraulic clamping) Compliance with standards: CE marking Total electrical power consumption: 30 kW This is a woodworking line for processing beams/roof trusses – it combines a saw for crosscuts and miters, milling cutters for fitting, mortising joints, a drill, and a mortising unit. The workpiece is moved using clamping jaws along the entire length of the beam with pneumatic clamping. If you have any questions or need further information, please feel free to send us a message or contact us by phone. A roof truss or other wooden structure drawn in a CAD program for carpenters, such as SEMA, can be directly sent to the CNC machine. The machine has guaranteed service support, and an upgrade of the ABB control program corresponds to the latest version. Demonstration and testing are possible. It provides a similar performance to a Hundegger K1. If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Tjdpfxjzquw Ae Adwoc Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: excellent (used), Year of construction: 2023, operating hours: 100 h, functionality: limited functionality, crosline650 Tsdpfozz Hwijx Adwjc

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Todpfx Asxxb Rredwec Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM Tedpfx Aez Eh Egodwoc TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine Todpfx Aox D Tbmsdwec ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Tjdpfx Adsyhn A Iowsc Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: as good as new (ex-display), Year of construction: 2012, functionality: fully functional, machine/vehicle number: Modular, WEINMANN BUTTERFLY TURNING TABLE Tsdpfx Ajt Uh Ayjdwjc

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height. Todpfxjn R A Ewe Adwoc

Condition: as good as new (ex-display), Year of construction: 2000, The machine was only operated for 2 weeks. It is practically new and unused. Tjdpfx Ajh T Ayqedwec

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, Tedjz Eh Nljpfx Adwsc 30 station ATC, through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools Tsdpfxezzcx Aj Adwjc - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces - Label printer Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe Tsdpfsz E R N Ujx Adwec New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post.

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 hp, movable on sturdy swivel casters Cutting height 200 mm Cutting height at 45°: 140 mm Swivels to the left up to 60° Swivels to the right up to 45° Cutting length 420 mm at a 90° position Cutting length when swiveled to 45°: 300 mm Tiltable to the left 60°, tiltable to the right 30° using a hand crank from the rear (also possible from the front on request) 1 piece saw blade 520 x 4.4 x 50 mm, 60 teeth, negative bevel Left roller bed with scale and stop slide, length 2000 mm to the saw blade Machine length 4000 mm 1 piece roller bed extension with scale and 2nd stop slide Tedpfx Aedxxadodwoc Mounting side: left, length 4000 mm. This extension roller bed also features an extendable measuring rod with a stop, allowing for precise cutting of wood on the left side up to a length of 7500 mm. 1 piece infeed roller bed, mounting side: right, length to the saw blade 2000 mm, can also be extended. Options: pneumatic material clamping Laser cutting guide With appropriate modifications, also suitable for aluminum processing Can also be supplied with a cutting height of 215 mm or 240 mm for an additional charge Without the extension roller bed, the machine costs €13,969.00 net.

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor Tsdez Hatfjpfx Adwjc

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Todpfx Adofg Tatewjc Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: ready for operation (used), For sale: SHAANXI MACHINE TOOL WORKS M1432A universal cylindrical grinder, 1000 mm center distance. Technical specifications: Manufacturer: Shaanxi Machine Tool Works Type/Model: M1432A Center distance: 1000 mm Tjdpfx Aoz Hu Dlsdwec Max. grinding diameter: 320 mm Center height: 180 mm External and internal grinding Power supply: 380 V / 3 phases / 50 Hz Connected power: 8 kVA Protection: 35 A Machine number: 177 Weight: approx. 5300 kg Operational. Ready for use. The price listed in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice at ul. Kwiatkowskiego 13. Contact by phone from 7:00 AM to 3:00 PM.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed Todpfozv S Rwsx Adwoc max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: Tjdpfeyudxxox Adwoc - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Todpfx Adjzkbirewjc