Used Telescopic Pocket Filler for sale (3,940)

Condition: good (used), Telescopic filling machine Make: Zacmi Type: automatic 60 pocket rotating telescopic filling machine Capacity: up to 36.000 cans/hour Frame: stainless steel Direction: left-right Dimensions: L x W x H = 2.600 x 2.600 x 2.000 mm Weight: 1.500 Kg Power-Supply: 380 Volt + 50 Hz – 3 kW Compressed air: 6 Bar Features: in- and out-feed slat-band conveyor diversion plates Psdjib A Idjpfx Amiegk revolving brush for removing product from top telescopes product height level control with proximity sensors height adaption with electric gear motor with dust roof Tooling: 67mm set Remark: without electric cabinet / control as-is or adjusted to customer needs

Condition: like new (used), It is suitable for direct filling of whole solid products of medium and large dimensions in cans, jars, plastic containers, etc. Products: peach halves, pear halves, whole peeled tomatoes, olives, cucumbers, carrots, apricots, artichoke hearts. - Production capacity will depend on the format and the product to be filled. Podpsxp Rqpsfx Amiegk

Condition: used, functionality: fully functional, Zilli & Bellini telescopic fillers are suitable for handling a wide range of products, from free-flowing granular products to whole peeled tomatoes. Suitable for round and non-round containers made of metal, glass, plastic. Pgedpfswnd Emsx Amijk Specially designed to compact dense and difficult to fill products inside the container after piston filling. PRODUCTS: peeled tomatoes (whole, sliced and diced) olives (whole and sliced) mushrooms (whole and sliced) PET FOOD pulses: peas, chickpeas, lentils, beans and broad beans vegetables (whole, sliced and diced): carrots, potatoes, onions, corn kernels, green beans, etc. fruits (whole, sliced and diced): cherries, strawberries, plums, currants, apricots, pears, peaches, etc. ravioli, pasta, cereals and rice. cockles and mussels. * Production may vary depending on the format and product to be filled.

Condition: ready for operation (used), Can diameter range: 52 mm – 99 mm Can height range: 50 mm – 140 mm Number of pockets: 15 Capacity: up to 200 cans per minute Pedjyyq D Hspfx Amijgk

Condition: used, Make: HEMA Model: GPF.3 Pedpfx Aeg D Udpsmiogk Serial number: 114 Year of manufacturing: 1992

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Filling Volumes : 500-1000 gr Controls: Siemens HMI Pjdsyr Nlfepfx Amijgk Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Over cap: Plastic lid after sealing

Condition: refurbished (used), Handtmann hamburger line + filler FS-510 + VF-830 Podpfx Amsxniyasiogk

Condition: ready for operation (used), Diameter range: 52 mm – 65 mm Height range: Production capacity: up to 3000 c.p.h. No. of heads: 18 Tooling for approx. 52 mm (202) Pgjdeyv An Ajpfx Amiok Filler and seamer available separately or together

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY. Pgedpfx Amjx Agmyjiek

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Pgjdpfx Aeyr Awbemijk Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), For sale: complete German-made measurement kit for diagnostics and machine setup, ideal for service, production, and inspection applications. The kit includes: • ROTUX Pocket Strobe™ stroboscopic lamp • Operating range: 30 – 12,500 FPM (flashes per minute) • Built-in display and adjustment dial • Battery powered (ANSMANN charger included) • Original case with foam insert Additionally: • HOLEX dial indicator 0–10 mm, accuracy 0.01 mm • NOGA magnetic base with adjustable arm • Set of adapters and holders • Mounting elements and cables • All components in excellent technical condition, from a working workshop Manufactured in: Germany Condition: very good, complete set, not worn out ⸻ Ideal for service technicians, precision mechanics, or for monitoring rotational movement, shaft alignment, vibration, or synchronization in drive systems. The ROTUX lamp is a professional tool, not a Chinese replica. Pgjdpfxeupuk He Amijk

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Examples include: - Milk - Water - Alcohol - Disinfectants - Etc. This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Podpfx Aorivxcsmijgk Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION Pgedpfxjrtnlaj Amiek

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Aseptic filler for drums Asepsystems with 2 heads 1" plug with homogenizer and sterilizer. Podpfjq Rdhusx Amiegk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 516 h, machine/vehicle number: A300057584, load capacity: 200 kg, platform length: 700 mm, platform width: 1,050 mm, overall weight: 4,900 kg, working height: 12,650 mm, TECHNICAL DETAILS Working height: 12.65 m Lateral outreach (standard platform): 6.05 m Up-and-over height: 7.12 m Slew range: 345° Podpfx Amsyzrg Sjiegk Platform capacity: 200 kg Articulated jib length: 4.14 m Jib movement range: 120° (+60° / -60°) Platform size (L × W, standard platform): 0.70 × 1.05 m Platform width: 1.20 m Tail swing: 13 cm Transport height: 1.99 m Transport length (standard platform): 3.65 m Wheelbase: 1.60 m Ground clearance: 10 cm Max. permissible ground pressure: 14.0 kg/cm² Travel speed, stowed: 6.0 km/h Outside turning radius: 2.60 m Inside turning radius: 0.75 m Gradeability: 30% MACHINE DETAILS Machine weight (standard platform): 4,900 kg Tyre size (non-marking): 457 × 178 mm Operating voltage: 48 V DC Batteries (Deep Cycle): 48 V – 260 Ah Charger: On-board 110 V / 230 V HF Drive motors: 2 AC motors Electric motor (hydraulic pump): 3.5 kW – 48 V DC Hydraulic oil capacity: 15 l EQUIPMENT Steel platform Sliding bar at rear entrance Proportional drive and slew control via joystick with integrated thumb steering switch Mini joysticks for proportional boom, telescope, and jib operation Large platform console with function enable Load sensing system AC power cable to platform Large tool tray Direct electric two-wheel drive Brushless AC drive motors Automatic idle energy-saving function Low-charge cut-off function On-board diagnostic system with integrated display Automatic rear wheel brakes Moulded polyester covers Robust steel mast with rollers Chain slack detection system Lashing and lifting lugs Ground control selector switch with key lock Battery discharge indicator Hour meter Horn Direction orientation system Anchor points for safety harnesses Manual descent system Passive pothole protection system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 67 h, machine/vehicle number: C170003922, load capacity: 230 kg, platform length: 1,340 mm, platform width: 690 mm, overall weight: 2,840 kg, working height: 20,050 mm, TECHNICAL DETAILS Working height: 20.05 m Outreach (standard platform): 9.70 m Platform capacity: 230 kg Up-and-over clearance at 230 kg: 8.20 m Slew range: 360° Articulating jib length: 1.68 m Articulating jib movement range: 89° (+0° / -89°) Basket rotation: 124° (+/-62°) Maximum ground clearance (retracted/extended): 0.79 / 1.09 m Platform size (standard, 2 persons): 0.69 × 1.34 m Platform size (narrow, 1 person): 0.60 × 0.78 m MACHINE DETAILS Transport width (with standard platform): 1.34 m Stowed width (without platform): 0.80 m Stowed height (on tracks): 2.00 m Stowed length (on tracks): 5.00 m Stowed length (on tracks, without basket): 4.40 m Stabilizer footprint: 2.92 × 2.93 m Machine weight (with standard platform): 2,840 kg Climbing ability: 28.7% Maximum permissible working angle: 15° Maximum approach/departure angle (front/rear): 20° / 21° Maximum ground pressure (with outriggers): 3.10 kg/cm² Travel speed (single speed nc/petrol): max. 1.1 km/h EQUIPMENT Aluminum platform Rear sliding entry Psdpfeyzrfzox Amijgk Foot pedal Fully proportional controls Articulated arm Remote control by cable to platform Fully remote-controlled drive and stabilization functions Multilingual LCD display at platform console Position sensor and console locking Load monitoring system for the work platform Platform with easy removal or exchange Engine protection Rubber tracks Cylinder protection for stabilizers Automatic shut-off when not level Electronic drive management system Electrohydraulic controls Fully proportional hydraulic control Lifting and lashing eyes Forklift pockets

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 286 h, machine/vehicle number: Z4525M-10187, load capacity: 227 kg, platform length: 760 mm, platform width: 1,830 mm, overall weight: 7,400 kg, working height: 15,940 mm, TECHNICAL DETAILS Working height: 15.94 m Platform height: 13.94 m Horizontal reach: 7.65 m Up-and-over clearance: 7.24 m Platform length: 0.76 m Platform width: 1.83 m Stowed height: 2.00 m Stowed length: 6.83 m Width: 1.79 m Wheelbase: 2.03 m Ground clearance (center): 0.24 m Lift capacity: 227 kg Psdpfoyzrctsx Amiogk Platform rotation: 160° Jib length: 1.52 m Jib vertical rotation: 135° Upper structure rotation: 355° Drive speed (stowed): 4.8 km/h Drive speed (raised/extended): 1.0 km/h Gradeability (stowed): 30 % Tilt sensor activation (longitudinal/lateral axis): 2.5° – 4.5° / 4.5° Turning radius (inside/outside): 1.8 m / 4.27 m Tyres: 0.23 × 0.37 m MACHINE DETAILS Drive type: 48 V DC (8 × 6 V, 350 Ah or 355 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 30.3 l Operating weight: 7,400 kg Tyre contact pressure: 689 kPa Ground load (tyres): 15.08 kPa Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 852 h, machine/vehicle number: 0300230251, load capacity: 227 kg, platform length: 1,520 mm, platform width: 760 mm, overall weight: 6,532 kg, pivoting range: 360 °, TECHNICAL DETAILS Platform height: 13.72 m Horizontal outreach: 7.24 m Up-and-over clearance: 7.70 m Slewing range: 360° continuous rotation Pgodpfxsyzq Uuo Amijk Platform capacity: 227 kg Platform rotation: 180° Vertical jib articulation range: 144° (+86° / -55°) MACHINE DETAILS Machine weight: 6,532 kg Max. ground pressure: 7.6 kg/cm² Driving speed: max. 7.2 km/h Gradeability: 30% Turning radius (inside, 2WS/4WS): 0.61 m Turning radius (outside, 2WS/4WS): 3.15 m Electrical system: 48 V DC Batteries: 8 × 6 V, 375 Ah AC power outlet on platform: 110 V Additional power supply: 12 V Standard tires: 24 × 9 × 12.5 Optional tires: 26 × 7 × 20, non-marking Hydraulic tank capacity: 15.14 l Platform width: 76 cm Platform length: 1.52 m Machine width: 1.75 m Machine height: 2.01 m Machine length: 6.45 m Wheelbase: 2.01 m Ground clearance: 20 cm EQUIPMENT Dual electric traction motors Foam-filled, non-marking tires Electric turntable All-wheel drive Automatic traction control Battery charge indicator Brushless AC motors ClearSky Smart Fleet Horn Hour meter LED lighting with amber beacon Lifting and tie-down lugs Load sensing system Platform leveling system Platform status indicator light SkyGuard SkyLine Tilt alarm and warning light

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 252 h, machine/vehicle number: Z34ND-1177, load capacity: 227 kg, overall weight: 5,178 kg, pivoting range: 355 °, working height: 12,520 mm, TECHNICAL DETAILS Working height: 12.52 m Platform height: 10.52 m Horizontal outreach: 6.78 m Up-and-over height: 4.65 m Dimensions Platform length: 0.76 m Platform width: 1.42 m Stowed height: 2.00 m Stowed length: 5.72 m Transport height: 2.26 m Transport length: 4.19 m Width: 1.47 m Wheelbase: 1.88 m Ground clearance (center): 0.14 m Performance Lift capacity: 227 kg Platform rotation: 180° Pgedpsyzq A Eofx Amisk Jib length: 1.22 m Vertical jib rotation: 139° Turntable rotation: 355° Drive speed (stowed): 6.4 km/h Drive speed (raised, extended): 1.1 km/h Gradeability (stowed): 35% Tilt sensor activation (longitudinal/lateral): 2.5° - 4.5° / 4.5° Turning radius (inside/outside): 2.13 m / 4.08 m Tyres (solid, non-marking): 56 × 18 × 45 cm Drive/Power Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l Noise and Vibration Levels Sound pressure level (ground): < 70 dBA Sound pressure level (platform): < 70 dBA Vibration: 2.5 m/s² MACHINE DETAILS Own weight: 5,178 kg Wheel contact pressure: 710 kPa Floor loading (wheels): 14.75 kPa Drive type: 48 V DC (8 × 6 V 315 Ah) Emergency controls: 24 V DC Hydraulic tank capacity: 15.1 l

Condition: used, Year of construction: 2007, operating hours: 4,575 h, machine/vehicle number: 0300115918, mast type: telescopic, fuel type: diesel, Empty weight: 16.974 kg Lifting capacity: 230 kg Working height: 2.820 cm Pgsdsy E E A Uopfx Amiek Dimensions of cargo space: 1220 x 249 x 305 cm Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Tyre brand: Outrigger Max. horizontal reach: 2290 m Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, operating hours: 2,830 h, load capacity: 240 kg, mast type: telescopic, fuel type: diesel, Year of manufacture: 2019 Empty weight: 16.500 kg Psdpoxb Ay Tsfx Amisgk GVW: 16.740 kg Dimensions (LxBxH): 1135 x 243 x 275 cm Working height: 2.775 cm

Condition: used, fuel type: diesel, color: red, lifting height: 16,000 mm, Year of construction: 2006, operating hours: 8,950 h, Empty weight: 12.955 kg Carrying capacity: 3.500 kg GVW: 16.455 kg Dimensions (LxBxH): 608 x 239 x 297 cm Working height: 1.600 cm Boom radius: 13.2 m = Additional options and accessories = Podpsydl Rusfx Amiogk - Pallet fork

Condition: used, fuel type: diesel, color: red, lifting height: 16,000 mm, Year of construction: 2007, operating hours: 8,470 h, Year of manufacture: 2007 Empty weight: 12.955 kg Carrying capacity: 3.500 kg Psdpfxsxiwh Ie Amiegk GVW: 16.455 kg Dimensions (LxBxH): 608 x 239 x 297 cm Working height: 1.600 cm Boom radius: 13.2 m

Condition: used, Manufacturer: Rex Podpfx Ajy Enxxjmiogk Model: RVF 761 Condition: Used Serial number: 7611040927 Stock number: 3364 Hopper: 250 liters Pump capacity: max. 6100 kg/h Filling pressure: max. 70 bar Operating hours: 19648 Power: 3 x 400V, 50Hz, 15kW Dimensions: 2320 x 1440 x 3035 mm Weight: 1100 kg Filling, portioning, and twisting Includes twisting device and DHG400 casing holder With lift for 200 L standard trolleys

Condition: used, Year of construction: 1993, Overview  This filling monobloc was manufactured in 1993 by the companies PERRIER / GANGLOFF / ZALKIN / CTA. The machine is designed for filling still water and was originally configured for glass bottles and later retrofitted for PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. In 2006, an air filtration system (CTA DA001) was added. The CIP system is integrated. Technical data  Capacity: approx. 6,000 bph (1.5 L) Formats: 0.5 L / 1.5 L Application: Filling of still water (PET bottles) Configuration: 16 rinsing heads / 20 filling valves (atmospheric) / 6 capping heads Neck finish: 30/25 Incl. Cap feeder, Air filtration system, CIP system Pjdjy Etd Tjpfx Amiegk