ZACMI telescopic filler

ZACMI

Condition: good (used), Telescopic filling machine Make: Zacmi Type: automatic 60 pocket rotating telescopic filling machine Capacity: up to 36.000 cans/hour Frame: stainless steel Direction: left-right Dimensions: L x W x H = 2.600 x 2.600 x 2.000 mm Laodpjib A Idsfx Anyjc Weight: 1.500 Kg Power-Supply: 380 Volt + 50 Hz – 3 kW Compressed air: 6 Bar Features: in- and out-feed slat-band conveyor diversion plates revolving brush for removing product from top telescopes product height level control with proximity sensors height adaption with electric gear motor with dust roof Tooling: 67mm set Remark: without electric cabinet / control as-is or adjusted to customer needs

Condition: good (used), Traypacker / wrap arround packer Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm maximum packaging size L x W x H = 460 x 350 x 250 mm 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change Ljdpfx Anjfxypioysac as-is or adjusted to customer needs

Condition: good (used), functionality: fully functional, Washing drum used for potatoes with steel platform Lasdpfx Aewatdionyoc Brand Zacmi Drum diameter 1180 mm Platform height: 2100 mm Overall dimensions: 5500 mm x 2400 mm x 4250 mm.

Condition: like new (used), functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be carried out before filling. Ljdpfx Asynkc Donyeac The sealing of the can is achieved by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. The result is a kind of seam or hook between the two, which ensures a hermetic seal and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Production output will depend on the type and product to be closed.

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 15,996 h, input voltage: 400 V, overall weight: 6,750 kg, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Lajdpfx Anjtwliweyoc Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. Lodpfx Anex S H U Seyoac WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Year of construction: 2010, condition: good (used), 2 SICON crushers Year 2010 Electrical cabinet missing Price: 15,000 € each Lasdpfx Anoiz Tm Ioyec 4 densimetric tables: 8,000 € each

Year of construction: 2014, condition: excellent (used), Kohlhoff Cleancontrol SL-S/D Hygiene Station/Gate Lasdpjx I Nvkefx Anyjc Manufacturer: Kohlhoff Model: Cleancontrol SL-S/D Machine number: 807705-10 Year of manufacture: 05/2014 Power supply: 400 V, 3 phase Power: 1.2 kW Brush length: 1100 mm Overall dimensions: 2100 × 1800 × 1800 mm Equipment: - Hygiene gate with turnstile - Sole cleaner - Hand disinfection unit The Kohlhoff Cleancontrol SL-S/D hygiene station is a comprehensive solution for personnel hygiene control in food processing facilities. The device combines sole cleaning, hand disinfection, and access control via a turnstile, effectively preventing contaminants from being carried into production areas. Its robust construction and fully automatic hygiene process ensure high cleaning and disinfection efficiency as well as easy, intuitive operation. The station is designed for intensive use in meat processing plants, food production facilities, and other environments with strict hygiene requirements.

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Lodew Rpd Sopfx Anyoac Price negotiable, available immediately. Price is without VAT.

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Lodpfxjx D Iv Ee Anyoac Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning