Used Toggle Press With Square Ram Steinel for sale (16,042)

Condition: used, functionality: fully functional, stroke length: 25 mm, table width: 100 mm, table length: 160 mm, throat depth: 80 mm, total length: 220 mm, total width: 100 mm, overall weight: 17 kg, installation height: 140 mm, ram adjustment: 77 mm, space requirement length: 220 mm, space requirement width: 100 mm, Toggle Press / Hand Lever Press with Square Ram Make: Steinel Type / Machine Number: PHK 8 Bsdpfx Aksxyw A Hsxswl Press Force: 6 kN Table Size: 100 x 160 mm Throat Depth: 80 mm Stroke: 25 mm Installation Height: 63 – 140 mm Height Adjustment: 77 mm Ram Bore: Ø 10 mm Machine Weight: 17 kg Space Requirement: 100 x 220 x 600 mm

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch Bwedpfxev Uraaj Akxsl - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram Bwodpox A U Ncjfx Akxsl • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, 1 piece toggle press VÖGTLE incomplete, with table, on pallet Color: as shown in the pictures and upon inspection Condition: used Storage location: warehouse Bwodpfsy D Nauex Akxel Payment method: advance payment by bank transfer Shipping: Collection only from Ditzingen-Heimerdingen

Condition: used, Format: 0x0 Bwjdpfx Aksx Rh D Ssxol Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: excellent (used), Year of construction: 1996, Toggle Press Schling Pressing force 60KN (6000 kg) Bedpfxoy Hkure Akxjwl Stroke adjustable from 0 to 25 mm Very clean and in very good condition

Condition: new, Year of construction: 2024, functionality: fully functional, Kyori High Speed Press VX50-1500 Bwodpfx Aswhk Dpskxol with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: new, Year of construction: 2024, Kyori High Speed Press VX50-1100 with variable stroke adjustment Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left Bsdpotndfrefx Akxowl colour: Kyori white RAL 7035 position of main drive: right ram adjustment range: 55 mm shut height max.: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED lights Bolster area (LxW): 1100 (1140) x 600 mm Bolster design: T-slot Bolster material: steel Bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm ram design: T slot dimensions: 2300 x 1600 mm total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm Bwedpfx Aksvuuknexjl table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm Bwodpfx Ako N D Ansxel weight: 6000 kg

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, Bwodofv Avvopfx Akxol embossing, caulking, etc.

Condition: new, pressure 26,0 kN stroke 60 mm Bwsdpsfv Avrjfx Akxol throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 34,0 kN stroke 40 mm Bwjdpfx Akjfv Avyexsl throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm Bwodpovuukujfx Akxsl ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Bwsdpeywdtvofx Akxsl Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: ready for operation (used), Year of construction: 2021, Gechter 8/12 HMS HKPV Toggle Press with Press Controller Kistler 5867 Bodpfjyyng Sex Akxewl Year of manufacture: 2021 Pressing force: 10 kN Dimensions: 570mm x 350mm x 600mm (W x D x H) Table dimensions: 200mm x 200mm Throat depth: 310mm Stroke: 450mm Weight: approx. 78 kg You are welcome to arrange an inspection appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, we can also issue a net invoice. A valid VAT identification number is required. Subject to prior sale. Visit our shop and feel free to check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1973, pressure 180/360 t Bwjdoyxy Huspfx Akxjl

Condition: excellent (used), Year of construction: 1992, Manufacturer: Woronez TMP Year: 1992 Bwodpfx Akjxlh Ttoxjl Model and configuration: KB8044 / 2500 ton Nominal force: 2500 tons Slide stroke: 190 mm Number of strokes: 14-20 Closed die height: 560 mm Slide adjustment: 15 Table dimensions: 1530 x 1530 mm Distance between uprights: 1600 mm Main motor: 77 kW, 380 V Overall dimensions: 4920 x 3340 x 5980 mm Weight: 125 tons.

Condition: used, Year of construction: 2012, pressure 260 t distance between columns 360/270 mm stroke 60 mm Stroke rate 50 / min Distance table/ram, max. stroke up, adjustment up 225 mm Table surface area 340 x 380 mm table height over floor 800 mm Ram surface 230 x 220 mm Ram adjustment 12 mm Power capacity 4,5 kW Bjdsvuuk Ijpfx Akxswl Dimensions (WxDxH) 2,0 x 1,55 x 2,6 m Weight 4,5 t Overhauled in 2012 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) overhaul in 2012: new clutch-brake combination new control Siemens S 7 new two-hand and foot operation

Condition: good (used), Year of construction: 2000, 5.pcs in stock Price Applies to 1.pcs. Bodpfx Aksiduvgoxewl Toggle press Fabr.SCHMIDT Druckl.3 KN.

Condition: new, pressure 17,0 kN stroke 60 mm throat 105 mm Working height from to 75 -180 mm table surface area 170 x 130 mm spindle diameter 25 mm weight of the machine ca. 35 Kg dimensions 260 x 130 x415 mm Knee lever hand presses SPECIAL PRICE!!! Bjdpfx Asfv Avnokxewl HK 1700 stroke 60 mm with crank with fine adjustment of working height Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle Bedpfxefv Avkj Akxjwl • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, pressure 500 kN stroke 40 mm throat 73 mm Working height from to 60 - 150 mm table surface area 115 x 70 mm weight of the machine ca. 10 Kg .Toggle lever hand press SPECIAL OFFER!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the Bwjdpfxef Nb Exj Akxel press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring

Condition: used, Year of construction: 2003, pressure 400 t distance between columns 1060 mm stroke 450 mm no. of strokes 15 - 30 /min Bjdpfx Akevzxpujxewl distance table/ram, max. stroke up, adjustment up 1160 mm table surface area 1000 x 700 mm capacity of ejector in table 2 x 16 t ejector stroke of ejector in table 125 mm Die cushion pressure in table 120 t Die cushion stroke in table 2 mm capacity of ejector in ram 2 x 4 t stroke of ejector in ram 100 mm ram surface 1000 x 700 mm column travel -side 630 mm power capacity 55,0 kW weight 50,0 t year of manufacture 1986 - overhaul 2003 multi-station press with automatic parts feed, Transfer, drawing cushion in table (2. stage) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Bjdpfx Akew U Ekpsxjwl Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system