Micrometer

MAUSER

Condition: excellent (used), Year of construction: 2019, Hainbuch centroteX quick-change system (2019 model) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Drawbar connection: M85x2 o Length: 53mm o Opening: 78mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o ID no.: 10000678 o Length: 136mm • 1x TOPlus mini Axle pull size 65 (A038530.008C) o ID no.: 10000676 o Length: 134.5mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179mm o Diameter: 210mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155mm o Diameter: 257mm • 1x monteq change system (A012708.0009B) • 1x D400 mobile container o Storage of the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Descriptions/Instructions • 1x Tool box with accessories Accessories • TOP65 clamping head (coarse for raw material) o 1 each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o each 1 pc.  d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs.  d38 • 1x boring ring for clamping head 65 • 50 clamping heads in total • Jaw accessories Knedpfjv Ivakex Agzsf o for HWR 4-jaw chuck  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck  1 set of hard Reversible jaws o Various T-nuts + screws o Various spacer bolts for jaws (adjust the clamping length to the material) • Various soft jaws (2 pallets)

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Ksdpfxowp S Sqo Agzjnf Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Technical Data Knodpfet Rwlpex Agzef note: no tailstock Working range: Circumferential diameter over bed: 550 mm Circumferential diameter over bed slide: 480 mm Axial run-out (X-axis): 405 mm Traverse path in longitudinal direction (Z-axis): 1,099 mm Max. Max. turning length: 1,000 mm Tool turret: Number of positions: 12 pcs. Holder: VDI 50 DIN 698800 Driven tools: No Headstock: Spindle head size 8 DIN 55026 Bearing diameter front: 150 mm Spindle bore: 103 mm Max. Max. diameter of the chuck: 315 mm Drive poweR 50% ED: 53 kW Max. Torque: 780 Nm Spindle speed range 30 - 3,000 min-1 Feed speeds: Face slide (X-axis): 10,000 mm/min Longitudinal slide (Z-axis): 10,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 10 m/min Max. Feed force: 15 kN Dimensions and weight: Machine dimensions L x W x H approx.: 5400 x 3200 x 2400 mm Weight of the machine approx.: 11,000 kg

Condition: excellent (used), turning length: 5,500 mm, Make: WEIPERT Type: W1400 Control: R&D MTC3 DBC Turning Length: 5500mm Swing over bed Ø: 1400mm Kodpfx Agjwzhzljzenf Swing over cross slide Ø:960mm Length: 9000mm Width: 2900mm Height: 2900mm Weight: 32000kg

Condition: good (used), Year of construction: 2004, control TRAUB SYSTEM TX8H weight 3500 kg range L-W-H 3960 x 1640 x 1800 mm output 11 kW number of spindle speeds 5600 / 4000 min-1 Torque 200 / 280 Nm The TRAUB turning machine TNA 300 was designed for the following machining of workpieces with a turning length of 450 mm. --> for machining metal and plastics with a defined cutting edge using suitable tools. --> for mounting in jaw chucks of sizes 160 to approx. 250 --> for machining material bars up to a Ø of 42 or 65 mm --> with EHS special version Workpiece removal device --> chip conveyor 800 mm long Knjdpfxswwl Ius Agzsf -> Technical data Working range Spindle diameter: 42 mm --> Spindle head DIN 55026, size: A5 --> Clamping fixture diameter: 160-175 mm / 200-250 mm --> turning diameter max: 275 mm --> Distance over turning centre: 35 mm --> max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool carrier Tool holders for cylindrical shank DIN 60880: 12 pcs. --> Shank diameter: 30 mm --> Chisel cross-section: 20x20 mm --> Switching time 1 station: 0.5 sec. --> Switching time each additional station: 0.15 sec. --> Feed drives X-axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> rapid traverse/path speed: 15 m/min --> Z-axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> rapid traverse/path speed: 18 m/min --> Y-axis: --> slide path: +- 35 mm --> Feed force: 6000 N --> rapid traverse/path speed: 10 m/min --> C-axis: --> Speed: 100 min-1 --> Torque: 140 / 196 Nm --> electrical resolution: 0.001 degree --> tailstock quill diameter: 70 mm --> quill stroke: 60 mm --> Stroke of the quick retraction: 280 mm --> quill setting force at 55 bar: 8600 N --> Mounting according to DIN 228: Mk 4 --> Steady rest Clamping range: 8 - 95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg Knjdpju At Thsfx Agzef - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: used, Year of construction: 2006, Technical data: Working area: Max. swing diameter: 680 mm Swing diameter over X-guideways: 565 mm Chuck diameter: 250 / 315 mm Cross travel (X): 315 mm Longitudinal travel (Y): 1350 mm Headstock: Spindle diameter in front bearing: 150 mm Spindle bore: 107 mm Main drive: Kjdpfxswym Ino Agzonf Main three-phase drive power: 36 / 45 kW Torque (100% duty cycle / 40% duty cycle): 600 / 750 Nm Speed range (100% duty cycle): 20 - 3200 rpm Speed range (40% duty cycle): 20 - 4000 rpm Tool turret: Number of tool stations: 12 Shank diameter: 50 mm Indexing time for 30°: 0.16 sec Tailstock: Tailstock quill travel: 1200 mm Quill stroke: 120 mm Quill diameter: 120 mm Quill taper: MT 5 Coolant system: Capacity: approx. 220 l Pump output: 1.7 kW Delivery rate at 6 bar: 20 l/min Connected load: approx. 65 kVA Dimensions (LxWxH), approx.: 5560 x 2115 x 2050 mm Weight without chip conveyor, approx.: 9500 kg Equipment/features: - CNC control SIEMENS SINUMERIK 840D powerline with Shop Turn - Single-row turret with 12 fixed tool stations - Hinged belt chip conveyor

Condition: used, Year of construction: 2010, pillar-mounted slewing crane: mobil arm length ca. 2500 mm weight of the machine ca. 4 t weight max. in kg 125 kg bucket net weight 430 kg bucket filling weight mindestens 416 kg bucket - total weight mindestens 846 kg max. wheel load 391 kg max. support load 544 kg . Knodpfx Agjmt Rpwozsf

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Knodpfx Agowzh A Aozof Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Ksdpjwmdv Ajfx Agzjnf