Heating system

Mawera

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Redpfex Tpnqex Abmebt Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Rbodpfexg Ubyjx Abmst Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: excellent (used), Year of construction: 2005, Mawera FSB 700 – Fully automatic biomass boiler with moving grate (wood chips), year of manufacture 2005, for sale. Rodpfeya Ngxex Abmjbt The fuel feed is hydraulic, not by screw conveyor. Components: Boiler body, combustion chamber and heat exchanger, complete hydraulic feed unit, flue gas fan, multi-cyclone, ash separator, chimney piping, control system, electrical control cabinet, operating manual. The system can be inspected in operation on site. Dismantling is possible after the heating season. Condition: Excellent Manufacturer: Mawera Model: FSB 700 Year: 2005 Video available via Whatsapp

Condition: excellent (used), Year of construction: 1998, operating hours: 3,000 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 2,150 kg, Very well-maintained machine in top condition with low operating hours Electronic soft start, idle shutdown Mawera RZM 200 Motor power: 18.5 kW Rjdpfx Aoyar Hzobmobt Rotor width: approx. 800 mm Rotor speed: 135 rpm Hydraulic pusher with PLC control Chipping capacity approx.: 500-850 kg/h Screen: 20 mm Extraction outlet left or right: 210 mm Original paint Weight: 2,050 kg The machine is installed under a joinery line and has only processed clean wood Last maintenance: 12/2024 Loading possible Comparable to Weima, Untha, Reinbold, Zeno,

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: Rsdpjw Dp Ufsfx Abmobt - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: excellent (used), CATALOG NUMBER 7191 TECHNICAL DATA - Loading hopper inlet: 870x735 mm - Rotor working width: 720 mm - Main motor: 18.5 kW - Pump motor: approx. 0.75 kW - Number of knives: 17 pcs - Knife size: 80x40 mm - Screen: 20 mm - Pressing drawer Redex Syqgspfx Abmjbt - Electric auto-reverse - Outlet for shredded wood: Ø250 mm - Dimensions (L/W/H): 2000x1350x1370 mm - Weight: 1586 kg ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 38,900 PLN Net price: 9,260 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant rate variations)

Condition: excellent (used), Catalogue number 7260 TECHNICAL DATA - Charging hopper inlet: 870x730 mm - Rotor working width: 710 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 19 pcs - Knife size: 75x40 mm - Screen: 15 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: diameter 250 mm - Dimensions (L/W/H): 2350x1400x1670 mm - Weight: 1360 kg Rodpfxox Sq Rko Abmebt ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 37,900 PLN Net price: 9,020 EUR depending on the rate of 4.2 EUR (Prices may change in case of larger fluctuations)

Condition: used, Technical details: balancing body max.: 800 kg balancing body diameter: 1250 mm Balancing revolution per minute: 190 - 3600 U/min bed length: 2600 mm voltage: 380 V/Hz drive power: 7,5 kw Weight approx.: 1,5 t dimension machine xH: 3,5 x 1,7 x 2,0 m dimensions electric cabinet: B:650 x T:250xH:800 mm Horizontal balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission by means of cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm Measured speed: 1st gear = 190 - 650 rpm. 2nd gear = 400 - 1250 rpm 3rd gear = 700 - 2100 rpm. 4th gear = 1200 - 3600 rpm. Rbsdpju Upp Tsfx Abmet 2 pick-up blocks whose displacement is manual over the entire bed Schenk measuring device with digital display and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask! *

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Rodpsx Ilp Hofx Abmobt

Condition: used, Year of construction: 2009, Wood chip heating system Mawera FSB 1100 – Moving grate combustion system suitable for low fuel quality, output 1100 kW, year of manufacture 2009, hot water system max. temperature 110°C, including pneumatic cleaning, including exhaust gas deduster – multicyclone separator with ash container, including fabric filter with ash container (bag filter), including exhaust fan, including hydraulic feed, including control unit, system in very good condition! The system complies with current emission regulations! Emission measurement report available! Dismantling must be carried out by the buyer, dismantling is complex, dismantling scheduled for spring 2026, including complete system documentation. Only 1 unit available for sale! Rjdpfsvyrwpjx Abmebt

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Rsdpfxsiwbfus Abmebt Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, Year of construction: 2011, Wood chip boiler Agroforst AVR 1000kW, year of manufacture 2011 + Mawera FSB 850kW, year of manufacture 2004 with moving feed grate, Agroforst plant delivers 1200kW and is equipped with hydraulic feed, including control systems, including bunker system – walking floor, including fuel transport augers, including hydraulic units, possibly including 1 electrostatic filter for 2000kW, year of manufacture 2011, including plant documentation, including pumps and valves, including heating pipes. Dismantling must be carried out by the buyer. Dismantling in spring 2026. It is also possible to purchase only one plant! Rjdsvgcqyspfx Abmsbt

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Rbedpfx Ajwa Ax Aebmot Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Rodov Umb Eopfx Abmjbt Viewings are available by appointment.

Condition: used, Year of construction: 2005, Mawera FU 350 RIA underfeed stoker wood chip boiler, output 350 kW, year of construction 2005. Includes feeder screw with backfire safety, dust separator with exhaust fan, and control unit. Bunker discharge system, fire protection flap, and 1m long fuel auger are not included. Dismantling must be carried out by the buyer. The system can be rolled outside in one piece; threshold must be removed for this. Rsdpovgf Ibefx Abmobt