Heat exchanger

Mawera

Condition: ready for operation (used), Year of construction: 1995, A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible. Nwodszmymbspfx Anuji

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Nwjdpfox U Exujx Anuji

Condition: good (used), Year of construction: 1999, Mawera SST – Push Rod Hydraulic Discharge System 1. System Description The Mawera SST two-beam hydraulic discharge system is used for the uniform and continuous discharge of wood chips from a rectangular fuel silo. The discharge shovels transport the material through alternating hydraulic lifting movements to feed the heating boiler, thus ensuring a consistent fuel supply. 2. Main Dimensions Silo length: Version with 6 discharge shovels: 7.50 m Shovel width: 900 mm Shovel depth: 250 mm Shovel height: 70 mm 3. Drive and Operating Principle Hydraulic drive with 2 hydraulic cylinders Pushing force: 160 kN Pulling force: 80 kN Automatic, alternating lifting control, synchronized with the boiler control system 4. Connections Material discharge into a central collection channel Further transport by means of a screw conveyor or chain conveyor Connection to the heating boiler: DN 315 5. Installation Requirements Industrial floor in MONO-FINISH quality with a levelness tolerance of ±5 mm Foundation plates, floor openings, and cladding to be provided by the customer Sufficient service access for the hydraulic unit must be ensured 6. Advantages Reliable operation with wood chips of various particle sizes and qualities Consistent fuel feed for stable 24/7 continuous operation Low maintenance effort The system is disassembled and ready for loading onto the truck. The discharge system does not require special transport because: the discharge beams can be divided into segments of 6.3 m in length, the transport width is significantly less than 4.24 m, as the beams are removed individually, the discharge shovels can be removed, transport is possible with a standard semi-trailer. Nwjdpfszl Hqkox Anuji

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg Nwodpjzh H Tdofx Anuei ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1199, overall weight: 800 kg, volume flow: 5,000 m³/h, Equipment: documentation/manual, type plate available, We are offering this used WOLF CKL-A-5800 re supply and exhaust air unit, with a Mitsubishi air conditioning unit, including all existing pipelines, manufactured in 2019. Manufacturer: WOLF Model: CKL-A-5800 re Year of manufacture: 2019 If you have any questions or require further information, please do not hesitate to send us a message or call us. Nwjdpfx Anszb Itgjusi

Condition: excellent (used), Year of construction: 2003, operating hours: 123 h, functionality: limited functionality, heating capacity: 350 kW (475.87 HP), nominal heat output: 350 kW (475.87 HP), temperature: 95 °C, MAWERA FU350RIA – Fully automatic heating system with underfeed stoking – 350 kW – Year of manufacture 2003 Manufacturer: MAWERA Type: FU350RIA Year of manufacture: 2003 Rated output: 350 kW Heating system: Fully automatic biomass heating system with underfeed stoking Heating medium: Hot water Maximum supply temperature: 95 °C Scope of supply: Boiler body Combustion chamber with heat exchanger Ash separator Njdpfx Anozi Hibeuewi Flue gas ducts for connection to the chimney Flue gas fan Discharge system Stoker screw (conveyor screw) Casing LOGIC control system Electrical control cabinet Operating and maintenance manual Condition The system is in good technical condition and has already been professionally dismantled. The combustion chamber is in perfect condition and shows only minimal signs of wear. The photos were taken before dismantling. An inspection is possible at any time in Bavaria after prior arrangement. This high-quality MAWERA biomass heating system is ideal for industrial and commercial enterprises, woodworking companies, agricultural operations, and district heating systems. Thanks to its robust design, the fully automatic control system, and its excellent condition, it represents an economical and reliable solution for long-term use.

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Njdpfx Anjx Ilp Hjujwi

Condition: excellent (used), CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet: 870x735mm - rotor working width: 720mm - main motor: 18.5kW - pump motor: approx. 0.75kW - number of knives: 17 pcs - knife size: 80x40mm - screen: 20mm - pressing drawer - electric auto-reverse - outlet for shredded wood: Ø250mm - dimensions (L/W/H): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressing drawer – very good condition – used chipper Net price: 33,900 PLN Nwsdpfjza Erdsx Anusi Net price: 8,070 EUR based on an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2001, Mawera wood chip heating system FU 350 RIA, underfeed firing system, output 350 kW, year of manufacture 2001, including feed screw with flashback protection, including control system, including dust collector with flue gas fan. System is fully functional; hopper discharge system is not included! Nwodpfjvyrwpox Anuoi

Condition: used, Year of construction: 2004, Wood chip heating system Mawera FSR 1100, output 1000 kW, max. operating temperature 110°C, year of manufacture 2004, including hydraulic connection unit, including multi-cyclone separator, including ash removal to the basement, including control system, photos of the pneumatic cleaning system show the condition as new. Dismantling must be carried out by the buyer; a forklift is available, and the system can be rolled out as a single unit. Nwsdpjvgf Ibofx Anuji

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm 22 kw motor Nedpfx Anot Tvk Aouowi with discharge auger

Condition: ready for operation (used), Year of construction: 1994, Mawera RZM 200 Main motor: 22 kW with electronic soft start Automatic idling shutdown Hydraulics: 1.0/1.4 kW, reversible Hopper opening: 844 x 1000 mm All-steel pipe: 270 mm Ø Rotor speed: 135 rpm Chopping teeth: 30 pieces, replaceable Chopping capacity: 500-850 kg/h Extraction: 30-35 m/s Weight: 2100 kg (without control cabinet) Control cabinet: with PLC microprocessor control 30 pieces, replaceable 500-850 kg/h with PLC microprocessor control Operating hours: only 2562 Nsdey T Ih Nopfx Anuowi Difference between RMO and RZM: The RMO is an older model, a classic found on the used market. The RZM 200 is its modern evolution – more robustly built, intelligently controlled, easier to maintain, and more efficient when processing modern wood waste and pallets.