Wood Chipper

Mawera RZM 300

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Kjdpfx Adot Amc Iskedp

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm Kdodjncc Igepfx Adkop elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND Kdodpfx Ajuryrnodkjp 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Kdedpfsy R Tqksx Adksp Location: Nattheim.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Kdedjwfqh Aspfx Adksp Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Kodpfxjyam Exj Adkjdp Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 211 10 017, functionality: fully functional, operating hours: 1,415 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 450 mm, saw blade diameter: 550 mm, height adjustment type: mechanical, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 2,900 rpm, total length: 7,075 mm, total width: 1,350 mm, total height: 1,992 mm, overall weight: 2,700 kg, table height: 850 mm, year of last overhaul: 2026, cutting length (max.): 5,200 mm, compressed air connection: 6 bar, extraction nozzle diameter: 160 mm, hole diameter of the disc: 80 mm, table width: 950 mm, working height: 850 mm, Equipment: CE marking, documentation/manual, saw blade guard, The FLS technology with a floating unit represents a modern and versatile method for the longitudinal splitting and formatting of materials, placing a strong emphasis on production flexibility. Kdedpfeubbubjx Adkjp This proven technology enhances yield, work productivity, and maintains the quality of wood material with particular attention to the cleanliness of the cut. FLS circular saws are characterized by a high level of safety and straightforward operation. The saw offered above features premium equipment compared to the standard configuration. This includes, for example, clamps on the sliding back pusher, an automatic workpiece ripping mode, two joysticks, and more. Further details available upon request.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics Kodpfx Aev Diy Ajdkjdp new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Kodpfxjyr Tx Aj Adkodp Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization Kdodpsy A D Ecjfx Adkop 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684