Wood shredder

Weima Holzzerkleinerer, Hacker WL 4

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Iedpjy R Tqkjfx Akxsba Location: Nattheim.

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Ijdpfoncc Igox Akxsba Transport can be organized

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Ibedpet Amc Isfx Akxsa

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW Ibjdpfxeuryrnj Akxsa PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Ibjdpfxjwfqh Aj Akxea Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Ibodpfx Aoyr Tx Aekxoa Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Ibsdeyam Exepfx Akxsa Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new Ibodpfx Akov Diy Asxsa with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with Ibsdpfx Akoy A D Ecjxja digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 Ibedpfxewmbcys Akxsa - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels