Profile projector

Mitutoyo PJ 300

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Ndsdpfjt Hagnox Agzef Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm Ndjdpfx Agepbbc Hjzof - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy Ndodpfoiqt S Ajx Agzsf In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. errors and omissions excepted-data given without obligation

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Ndsdpfx Agstyyn Hezjf

Year of construction: 1986, condition: refurbished (used), Chamber filter press, cpl. General overhaul in stainless steel lining, 82 filter plates in PP (food safe), 30 mm cake thickness, press capacity approx. 1100 litres, filter area 96 m2, fitted new filter cloths, max. 15 bar feed pressure possible, closed outlet via 2 diagonal corner holes, automatic plate transport and filter cloth washing system in stainless steel , high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with base for raising (stainless steel), control cabinet Ndodpfx Agsn Dw Nkjzsf

Year of construction: 2021, condition: like new (used), Continuous belt annealing furnace electrically heated. Nsdjha T Ipjpfx Agzsdf The unit is equipped with high quality components and is in mint condition. The furnace is pleased to be inspected at any time. The plant is not completely assembled at the moment. For further information we are pleased to be at your disposal. Annealing furnace suitable for annealing of small parts (Steel parts) with cooling zone at the outlet. Throughput capacity: 100 kg/h temperature max.: 1100°C depending on the weight of the piece, the throughput speed of the volume and single- or multi-layer charging. Pouring height max.: 40 mm Throughput height max.: 60 mm Furnace time adjustable: 200-30 mm/min Total length of the plant approx. 11000 mm Total width of the plant approx. 1750 mm Total height of the plant approx. 2320 mm Total heating capacity: 81 kW Heating zones: 3 Heated length: 3000 mm Cooling zone length: 2500 mm belt width: 500 mm Temperature accuracy +/- 2°C Cooling zone fans 2 pcs. Furnace gassing: nitrogen/hydrogen or nitrogen only Offer without charging!

Condition: refurbished (used), Year of construction: 2025, operating hours: 16 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, ambient temperature (min.): 16 °C, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system. Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2025. Incl. latest SW update, 18 months free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Ndsdpfx Asdy Uvmegzjf Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera including lasers including LED ring light incl. new frame grabber (Eagle) including 2-monitor operation incl. CNC control and PC including new Optichek 3D 5.0 evaluation software

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 Ndsdpoi Hb Szofx Agzof High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: used, Year of construction: 2008, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Visio 500 optical/tactile 3D measuring machine. Travel range: 453 (400 X, 500 Y, 300 Z). Measuring software: PC-DMIS CAD Version 2015. Probe change rack with 6 positions, equipped with 2 TESASTAR MP modules in total. Silent PC Big Tower with Windows 7 (fully installed and operational). Camera with 200x optical zoom featuring ring light/coaxial light and transmitted light (diascopic). All functions fully operational. Y-axis has minor scratches, which have been polished. This does not affect functionality or accuracy. Ndodpfxjiyymrs Agzjf

Condition: used, Year of construction: 1988, x-travel 310 mm y-travel 340 mm Ndjdpfjt Hxatsx Agzsf z-travel 170 mm total power requirement 2,5 kW weight of the machine ca. 900 kg dimensions of the machine ca. m