Used Accessories for sale (22,484)

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm Hnjdpfx Abozb Iihjvjn EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches Hnedpozb Idrofx Abvjn MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Hsdpfxszb Idfj Abvjnn Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Hnedpfxjzb Ip Ij Abvjn Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Hnjdpsx Ddc Ijfx Abven Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, Year of construction: 2024, Tsugami B0205-VR CNC Swiss-Type Lathe Mfd. 2024 Hours: 73 NEVER RAN PRODUCTION! Accessories & Options: Fanuc 0i-TF Control Fire Trace Fire Suppression (5 lbs) B0-WORK-KIT MKIII Work Conveyor Through Sub-Spindle Coolant with Pump Abile Programming Software Edge Scout 320 Barfeed Two Channel Sets Hnedsy Um N Iepfx Abvsn Specifications: Max Machining Diameter: .787" Max Headstock Stroke: 6.69" (Guide Bushing) / 1.771" (Chucker) Main Spindle Speed: 10,000 rpm Sub Spindle Speed: 12,000 rpm Live Tool Spindle Speed: 8,000 rpm Tool Positions: 21 Sub Spindle Max Machining Diameter: .787" Sub Spindle Front Ejection Max Length: 3.15" Max Tool Spindle Slotting Cutting Diameter: 1.18" Rapid Traverse Rate: 36M/min Main Spindle Motor: 7.5 hp | Sub Spindle Motor: 5.0 hp Coolant Tank Capacity: 47 gal. System Input Power: 13.0 KVA Compressed Air: 60 psi Dimensions: 69" x 41.5" x 67" | Weight: 3,968 lbs

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Hnodpfegau Uxox Abvjn Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.

Condition: used, machine/vehicle number: 0719, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN Hsdpfx Absdhwzfevjnn max.workpiece weight: 5000 daN Weight: 16 kg

Condition: used, machine/vehicle number: 1109, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg Hodedhwzaspfx Abvenn

Condition: used, Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Weight: 16,9 kg Hedpfx Abjdhwy Tevonn

Condition: used, Retainer metric 80 Hnjdpfsdhwzwsx Abvsn Core tip angle: 60 ° Total length: 380 mm Weight: 18 kg

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Hnsdjy Ayrropfx Abven Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Hnsdpfx Aeu Ez Hujbvon Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 693068, overall weight: 7,300 kg, power: 30 kW (40.79 HP), Walter Helitronic Vision CNC Tool & Cutter Grinder with Pallet Loader Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Vision, s/n 693068, year 2008 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Can be viewed under power. Specifications: • Longitudinal movement (X-axis) 480 mm • Y axis vertical movement 320 mm • Z-axis transverse movement 700 mm • Rotary table swivel range C-axis +/- 200 ° • Workpiece Holder ISO 50 • Max. Workpiece diameter 320 mm • Workpiece length circumferential grinding 370 mm • Workpiece length for face machining 320 mm • Accuracy linear resolution 0.0001 mm • Radial resolution 0.0001 ° • Diameter of the spindle 100 mm • Grinding wheel mount: HSK50 • Diameter of the grinding wheel 200 mm • Grinding spindle speed 0 – 12,000 rpm., • Top performance 30 kW • Connected load 35 kW (460 V / 60 Hz) • Weight approx. 7,100 kg • Dimensions L x W x H 3649 x 2490 x 2301 mm Accessories: • Does not include wheel opening stick fixture seen in the pictures • Stepless speed control, probe, pneumatic workpiece clamping • Electrostatic mist extractor • Fire extinguishing system • Oil collecting pan, 2 grinding wheel flanges, Complete set of Manuals • Turmoil Drive Chiller Hnjdpfxjuqzdpj Abvsn • Loader Pallets: 8pcs – 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1-1/4” • 10pcs - HSK Wheel Arbors Software: • Windows XP Pro Svc Pack 3 • Tool Studio V3.3 • The computer was upgraded & is very fast rendering tools in Tool Studio Condition: • Excellent condition, very accurate & consistent. October 2023 Y axis Complete rebuilt, Linear motor, rails, Compensation Cylinder, Festo Booster Pump done by United Grinding. • 1 Micron Filtration system was used on the machine (not included), so it’s been kept extremely clean • We can load onto a flatdeck for shipping for $1200. We can also provide shipping quotes if you would like & crating for Sea Freight shipping.

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Hjdpsxh Rqtefx Abvsnn Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears Hjdpfxeymfz Se Abvsnn - Machine concept designed for the shortest set-up and changeover lines and maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer - Operating elements and PC protected against unauthorized access with lockable cabinet element

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Hedpfx Aeydnxnjbvjnn Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2000, Ref:11056 . 2000 Hunkeler VEA 520-K-HHS 3000 Endsheet Paster. For inside & outside gluing of end sheet papers, greetings cards inserts and glue-on mounts. Comprising: 1 x product feed (spare feed arm for large format products) 1 x sheet/card feed Hnjdpfjx Uwznsx Abven Sheet counter PVA cold glue system Robatech glue system Table delivery Integral compressor I.R. light beam guard Including tools & accessories. Specification: Product sizes, outside gluing, Max: 520 x 310 mm Min: 100 x 70 mm inserting/tipping-in, Max: 320 x 260 mm (with accessories) Offset gluing (for outside gluing only): - Maximum 50 mm from the fold - No restrictions in travel direction Mechanical speed, Max: 8,400 cycles/hr.

Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 EVA Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Auto calliper for automatic size setting Specification: Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Thickness, Max: 50mm Hjdpsx Nfmhefx Abvonn Min: 1mm Max speed : 500 cycles/hr.

Condition: excellent (used), Year of construction: 2009, operating hours: 19,000 h, Ref:11108 . 2009 Muller Martini ‘Acoro A5’ Perfect Binding Line Excellent condition line with only 19,000 hours worked! Comprising: 16 x 1571/21" top loading feeders + hand feed station ASAC thickness control ASIR III signature recognition & 3715 reject unit M.M. 3642 automatic book block feeder M.M. 'Commander' automatic make-ready Muller Martini 3026-20 ‘Acoro A5’ with 20 x Combi-clamps Measuring table for automatic make-ready ICS C80 & 30 EVA pre-melt tanks EVA spine gluing tank EVA Hot-melt side gluing tank Gauzing station Pile/rotary cover feeder 2 x nipping stations Lay-down delivery unit to; Two tier 180 degree flat conveyor system to; M.M. 3671 ‘Merit S’ three knife trimmer Including accessories, tools & manuals. N.B. Compressed air required – NOT included. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Hsdpfx Abezaa Rbsvjnn Min: 140 x 100 mm Book thickness, : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width, : 203 - 642 mm Mechanical speed, Max: 5,000 cycles/hr.

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp Hjdpfx Abeydnw Dsvsnn 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Huge variety of materials for high-quality cases and covers Hnsdpfx Ajv Uqpmjbvjn Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm

Condition: new, Year of construction: 2026, Ref:10804 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text Hnodpst Dpwdjfx Abven LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: excellent (used), Year of construction: 1997, Ref:10993 . 1997 Hoerauf BDM20 Case Maker. Suitable for various products such as book cases, ring binders, letter file cases, 3-piece cases, game boards, padded cases for photo albums, pocket diaries, bible cases etc. Comprising; Conveyor infeed of board In-line board cutting attachment for 3-piece boards Triple reel feeder for soft spines with auto-splice Magazine feeder for stiff or hollow spines Shingle conveyor feed of pre-cut cloth Pre-melt tank Mobile hot-melt gluing unit and circulation pump Conveyor delivery with counter Hnsdpsw Avmfofx Abvon DC drive motor Complete with compressors, tools & manuals. Accessories: PVA cold glue tank for 2nd pass back lining capability. Specification: Open case size standard : Max. 380 x 680 mm Min. 130 x 190 mm Board thickness : Max. 4 mm, Min. 1 mm Spine width : Max. 80 mm, Min. 8 mm Spine thickness, flexible : Max 0.5 mm, Min 0.3 mm Rigid : Max. 3 mm, Min 1 mm Cover material : Max. 0.3 mm, Min 0.1 mm Production speed : Max. 60/min.

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit (to be confirmed). Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker Hnodpfewxw Snsx Abvon