13
Dust extraction,smoke extraction,self-cleaning filter TEKA-AIGNER
Fume exhaust system for plasma, laser, soda blasting, gypsum, cement, brick, plastic and all kinds of dry dust.
The filter is cleaned pneumatically by pulses of compressed air during operation.
The device is equipped with an automatic system to impregnate cartridge filters, fire detection system and a filter with activated carbon to neutralize the odors generated during treatment.
Qctvl
The extraction is designed for special appli...
2
Chuck
Make: Aigner
Stable, light clamping device made of aluminium.
Length: 800 mm
Beqze8luro
Clamping length: up to max. 550 mm
Infinitely adjustable counter jaw
The long handle enables a safe guiding of the workpiece
and protects the hands during milling.
6
Dust extraction, welding fume extraction, filter cartridge self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust.
The filter is cleaned pneumatically with compressed air impulses during operation which results in high efficiency of the device.
Filter cartridges resistant to moisture and fire, operating temperature up to 93 degrees Celsius.
Fan on clean side which reduces the risk of explosion to a minimum.
Hvoxvxp
2 fans 11 Kw (2...
2
Spare part for an Aigner integral stop.
1 piece bar cassette with all bars, NEW
Cueoqdu0
5
Integral stop
B833jogc
Make: Aigner
500/500
- both stop halves 500 mm long each
We deliver:
Aigner safety technology for professional woodworking.
3
Spare parts for Aigner integral stop.
Make:Aigner
-Bottom bar
-bridge
-axle
Ygy9yaidp
3
Spare parts for Aigner integral stop
- bar
- bottom bridge
- Axle
Xwrhckgln
6
Spare parts for an Aigner integral stop
- cassette
- Bar cassette with all bars
Kwcvp
Supply of spare parts of all kinds.
5
exhibition machine
FIMAL surface planer type PF 530 N,
Partnership Edition
Technische Daten:
Abrichttischabmessung: 3.000 x 530 mm
Aufgabetischlänge: 1.800 mm
Abrichtanschlagabmessung: 1.500 x 175 mm
tilting range fence: 0 - 45 °
4-knife-Hobelwelle System TERSA d=120mm: 5.000 UpM
max. chip removal surface planer to CE: 8 mm
motor 380 Volt / 50 Hz.: 5,5 kW
B8ks2ybz2n
Schallpegel to EN 27960: 82,9 - 88,9 dB(A)
Grundausstattung:
Elektrik to CE-Norm
Magnetbremse
suction nozzle d=150mm
protection ...
7
Surface planer KÖLLE AH 50
is visually and technically in a very good condition, the machine comes from a small joinery and was only little used
all guides and bearings are OK, the machine works perfectly
with suction socket 160mm
max. planing width 500mm
the chips can be removed very well
with 4 cutterblock for normal strip planer knives, the adjustment is no problem, you get a setting gauge with it
Ccvkjwp
with complete knife cover for highest safety
the machine will be delivered and demonstra...
1
Ausführung : schwenkbar
2ucot3
Tischgröße : 1000x1000 mm
Tischhöhe : 850 mm
Drehzahlen : 2900/4400/6000/7800/10.000 U/min
Fräsdorndurchmesser : 30 mm
Schwenkbereich : 45° Grad
Spindelverstellung : manuell
Spindel rechts- linkslauf : Ja
Wechselspindel : Ja
Ausführung Anschlagbacken : Gussausführung
Anschlagverstellung : manuell
Tischverlängerung : Aigner Befestigungsschienen
Vorschubapparat : mit 3 Rollen
Schaltpultposition : unten
Gewicht ca. : 790 kg
Motorleistung : 5,5 kW
Absaugdurchm...
6
Swivel spindle moulder Martin
type T 25
swiveling -0,5° - 45°
right / left rotation
engine power 7,5 / 9,5 kw
3000-4500-6000-9000 rpm.
with sliding table
length stop
B3wxqrt
extendable workpiece support
3-roller feed
Aigner table extension
Aigner table extension
Aigner integral fence
function-tested
Operating instructions
3
heavy milling machine
table design LL
automatic spindle adjustment high-low digital
Bsqwayca
automatic spindle adjustment tilting -45 to +45 degrees Digital
motor 7,5 kW
5 speeds
left-right rotation
Aigner - Integral - safety milling fence
CE - execution
Machine as good as new
8
Spindle moulder SCM T130
Feed 3 rollers
Variable belt rotation
Spindle speed 3000/4500/6000/7000/10000rpm
Manual lifting of the spindle
Spindle rotation right and left
Spindle diameter fi35mm
Spindle length 140mm
Aigner guides
CE
Qiqcd
6
Description: Gebr. Schelling table cutter (unmachined)
Manufacturer: Schelling
Type: FZ 4
Description:
Poll- Switchable motor: 3.3 / 4.4 kW.
right/left rotation
Spindle Ø: 30 mm
Mechanical height adjustment via handwheel
Caq0iumpeo
Fine adjustable milling stop
Fence: 650 mm (Aigner)
Suction connection: 1 x 100 mm / 1 x 80 mm
3 milling speeds
Feed: ELU 3 rollers infinitely variable
Condition: used from company liquidation
4
Contour milling device with protective hood CPS/ PANHANS 1629 GAMMA V (curved milling fence)
the device is new and unused
works perfectly
is a tool recommended by the Holz- BG with CE- test seal
is similar to the Bogenfräsmaster from AIGNER
it can be used to mill e.g. contours, round or stitch arcs inside and outside, the template or the workpiece is guided at the curved routing stop, the curved routing stop replaces the stop ring and serves as a spacer to the router bit
can be used on all table...
1
RESERVIERT FÜR NAUMANN - kommt am 04.05.22 rein
Ausführung : schwenkbar
Tischgröße : 1340x800 mm
Tischhöhe : 870 mm
Drehzahlen : 3000/4500/6000/9000 U/min
Fräsdorndurchmesser : 30 mm
Schwenkbereich : +45°/-5° Grad
Spindel rechts- linkslauf : Ja
Drehzahlanzeige : optisch
automatische Motorbremse : Ja
Ausführung Anschlagbacken : Aigner- Anschlagsystem
Anschlagverstellung : Handrad
Anzeige Fräsanschlag : mechanische Zahlenanzeige
Tischverlängerung : Aigner Befestigungsschienen
ausziehbare...
4
SPINDLE MOULDER type SAC SUERI TS 130
second hand machine
CE mark : YES
electrical inversion of the direction of rotation
self-braking motor
B9uptpv
fixed shaft
with AIGNER system
electric lifting of shaft with digital display
2 speed motor Hp 7 / 8,5
n.10 rotation speed of shaft from 1500 to 10.000 rpm
shaft diam. mm. 30
volt. 380/50
2
Emco ET 360 with Siemens control and Intramat components
incl. Kuba meter loader
without clamping device
incl. draw tube and draw tube stops
various bar reductions for draw tube and loader operation
15 pcs. VDI30 receptacles
Bvkgwbprwz
9
spindle moulder Martin
4 rollers univer feed, adjustable up and down electrically
culaga aigner
exchangeable spindle, additional spindle fi40mm
spindle inclination +45 - -45 degrees
cart on the left side adjustable up and down to the cutter and at an angle
4 speeds of rotation
motor 7.5 kW with brake, 2-speed
machine not developed from school workshops, the Mercedes among milling machines
B3wvbol
10
spindles diamter 35mm
electric regulation of spindle angle
electric regulation of spindle up/down
4-rolls feeder Masterwood
Aigner fences
spindle speed 3000/4500/6000/7000/10000 RPM
table dimensions 400x1200
delta/star start
B9hmb0pwon
2
Swing spindle milling machine Hofmann
7pevbkm
type TFS 1200
swiveling -0,5° +45°
motor power 5,0 / 6,2 kW
motor brake
Star delta connection
3000-6000-4000-8000-5000-10000 U/Min.
30 spindle
Control panel swiveling
Aigner patent stop
table widening right/left
extendable workpiece support
3-axis control with program memory (each electrical adjustment with display):
- axis X: height adjustment
- axis Y: angle adjustment
- axis Z: stop adjustment
function tested
Operating instructions
2
Fräsdorndurchmesser : 30 mm
Schwenkbereich : +45°. Grad
Hihngmlh
Spindel rechts- linkslauf : Ja
Wechselspindel : MK5
Ausführung Anschlagbacken : Bark-O-Mat
Anschlagverstellung : manuell
Anzeige Fräsanschlag : keine
Tischverlängerung : Aigner Befestigungsschiene
Vorschubapparat : mit 3 Rollen
Schaltpultposition : unten
Gewicht ca. : 800 kg
4
Used NOVA spindle moulder TI 105 with inclinable spindle, year 2016.
Table size: 1200x855
Motor: 4,0 kW with automatic star-delta switch
Pivotable 0 - 45 degrees
Height and tilt adjustment with hand wheel and mechanical digital display
automatic motor brake
speed: 3,5-6,0-8,0-10 thousand
Milling spindle diameter 30 mm
spindle with clamping screw
max. tool diameter 250 mm
suction socket: 2x D120
special equipment:
- Milling fence with stepless adjustment via crank easily accessible from the front...
1
The mixing device fits all commercially available canisters and drums with the universal screw connection set. The mixing ratio is precisely adjusted via a needle valve. High repeatability, mixing volume up to 370 l/h, connections 1/2 inch (inlet and mixer outlet), 3/8 inch (concentrate inlet). With safety check valve.
Bvkgpzg2se
Uses:
Compact mixer for fast and accurate mixing of the desired emulsion concentration of cooling, grinding and lubricating fluids.
10
Totaly refurbished machine, condition like new!
- Height adjustment: 130mm
- Shaft: 30mm
P8qjt
- Speeds: 3000/4000/5000/6000/8000/10000 rpm
- Motor (Dahlander) 380V; 4.5kW
- Changeable direction of rotation left / right
- Sliding table with height adjustment
- Aigner table extension for insert milling
- WEGOMA feed with 8 speeds, feed rollers like new
- Milling bearing (FAG) and V-belt freshly replaced
If necessary, videos can be sent from the running machine.
Cheap delivery within the EU.
4
SPINDLE MOULDER - MFL 1000-04 MP
table dimension 115x82 cm
Aigner fence plans
spindle diameter 35
main motor 4 kw (5,5 hp)
Wsta33i
4-wheel feeder Univer
1
Hobelmaschinen Duo bevertical aus:
1. FIMAL surface planer type PF 530 N,
Partnership Edition
Technische Daten:
Abrichttischabmessung: 3.000 x 530 mm
Aufgabetischlänge: 1.800 mm
Abrichtanschlagabmessung: 1.500 x 175 mm
tilting range fence: 0 - 45 °
4-knife-Hobelwelle System TERSA d=120mm: 5.000 UpM
max. chip removal surface planer to CE: 8 mm
motor 380 Volt / 50 Hz.: 5,5 kW
Schallpegel to EN 27960: 82,9 - 88,9 dB(A)
Grundausstattung:
Elektrik to CE-Norm
Magnetbremse
suction nozzle d=150mm
pr...
10
Working width 530 mm
Length of the planing table 3.000 mm
Number of knives 4-TERSA St.
Motor output 5,5 kW
FIMAL surface planer type PF 530 N
-----
NEW MACHINE "Partnership Edition"
Technical specifications:
-----
Planing table dimensions: 3,000 x 530 mm
Feed table length: 1,800 mm
Dressing fence dimensions: 1,500 x 175 mm
Swivel range stop: 0 - 45 °
4-knife cutterblock system TERSA d = 120mm: 5,000 rpm
Max. Chip removal dressing according to CE: 8 mm
Motor 380 volts / 50 Hz .: 5.5 kW
Sound...
Used Aigner contermax
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
Sample sales contract for used machines in nine languages
Machineseeker still biggest sponsors of 2nd German football league
Olympic Games: Machineseeker sponsors Team Germany
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
