Used Emco Maximat 11 for sale (144)

Condition: good (used), functionality: fully functional, Application: Metal Product type: Lathes Operating mode: Manual Serial number: 8303059 Maximum spindle speed: 2200 rpm Brand: Emco Pgodjyalhxspfx Af Ijg Required power (kW): 1.4 Country and region of manufacture: Austria Power source: Electric Type of control: Conventional Machine weight (kg): 300 Model/Type: Maximat Super 11 Year of manufacture: 1983

Condition: excellent (used), functionality: fully functional, EMCO Maximat Super 11 – Precision Lathe in Very Good Condition For sale is a used EMCO Maximat Super 11, a robust and precise universal lathe "Made in Austria." This machine is ideally suited for workshops, training centers, or demanding hobbyists who value quality and accuracy. The machine is pre-owned but well-maintained and fully operational. All gear shifts are smooth, the guides are in good condition, and the machine has been regularly serviced. Technical Specifications: Center height: 140 mm Distance between centers: 600 mm Spindle speed range: 55 – 2200 rpm (8 geared steps) Tailstock: MT2 taper Tool holder: Quick-change toolpost Lighting: Integrated LED work light Weight: approx. 360 kg Dimensions (L × H × W): approx. 1.3 m × 1.2 m × 0.6 m Condition & Accessories: Machine runs quietly with low vibration Tailstock is smooth and easy to adjust with high precision Quick-change toolpost included LED work light for optimal visibility Various clamping devices or tools can be purchased additionally upon request (by arrangement) Price: The price is within a reasonable range and negotiable. Open for price discussions upon serious interest. Miscellaneous: Collection preferred, viewing by appointment possible Machine can be shown under power Podpfxoxqx Nvo Af Ijgg

Condition: good (used), functionality: fully functional, Lathe Emco Super 11 CD. 380V 3-speed, 2-stage motor, smooth operation. Spindle drive with gearbox, gears running in oil bath. 8 spindle speeds adjustable from 55 to 2200 rpm. Norton gearbox for easy thread cutting. Automatic longitudinal and cross feed. Pjdpsyalrkefx Af Isgg Tailstock MK2. Coolant pump located at the rear of the base cabinet. Chuck safety guard. Quick-change tool post. Distance between centers: 650 mm Center height: 140 mm Spindle bore: 35 mm

Condition: used, functionality: fully functional, EMCO Lathe Maximat V13 380 Volt Serial No.: D1E8706022 MB No.: 99826 Condition: used Location: 86928 Hofstetten Podpfev H Uklex Af Iegg Price: €8,900 net

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Pgsdpswpkd Sjfx Af Iog

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Pgodpfxew Dfhue Af Ijg

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Pgodpoydqq Tsfx Af Iog - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right Pjdsyffgrjpfx Af Iegg • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: SIEMENS, This 3-axis EMCO VT 400 vertical turning machine was manufactured in 2014. It offers robust construction and precision turning capabilities, ideal for various industrial applications. Consider the opportunity to buy this EMCO VT 400 vertical turning machine. Contact us for more information. Additional equipment • Number of tool holders: 12 • Tool holders according to DIN69880 VDI 40 • Number of driven stations: 12 Machine Benefits Technical Machine Benefits Pgsdpfox D Iraex Af Isg • Torque max. : 40 nm • Speed range: 0-4000 min-1 • Drive power max. : 8. 5 kw • Duty cycle at max. Power: 25%

Condition: good (used), Hardness tester functional Podpoydlf Sofx Af Iogg

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Psdpswyit Hsfx Af Isgg

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar Pgsdpfx Asx D E Hbjf Iog • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Year of construction: 2007, operating hours: 8,500 h, condition: excellent (used), functionality: fully functional, Vertical BAZ Emco FAMUP MCX 750-1200 with IKZ 40bar year of construction: 2007 Control: Fanuc 21i Running hours: 8.500h Chip Blaster high pressure system - Max. Speed 8.000 min. - Tool magazine with 24 magazine places (ISO 40), - Tool magazine ISO 40 - 24 tightening bolts ISO 40 - Standard painting: red - gray - black - Spindle is prepared for high pressure cooling (connection A) - Tapping without compensating chuck - Central lubrication system - Chip removal from the housing via flushing device - Flushing gun for cleaning of working area, clamping devices, parts - Coolant device with 3 adjustable nozzles - Coolant tank 500 l - Spindle blowing device for cleaning the fixture during tool change - Illumination of the working area by halogen lamp 24 V - Two-color alarm lamp TECHNICAL DATA MCX 750 axis X - longitudinal: 750 mm axis Y - transverse: 500 mm WORKING RANGE axis Z - vertical: 640 mm clamping area: 900 x 520 mm T-slots: number, width, spacing 5x18x100 mm max. table load: 400 KG TABLE distance table surface - floor mm 925 speed range: 50 ÷ 8.000 min Pgedpoh Akhkjfx Af Isg spindle motor power: 13/9 KW tool holder ISO 40 DIN 69871 Torque: 82.7/57.3 Nm SPINDLE Drive Belt drive rapid traverse X,Y,Z m/1' 24 Working feed X,Y,Z m/1' 20 AXIS DATA Axis acceleration (X,Y,Z) G 0.25 One-way positioning accuracy in total stroke range XYZ µm ± 8 One-way repeatability X, Y, Z µm ± 8 PRECISION Reversal span µm 5* Number of tool positions: 24 Tool selection random Max. Tool diameter with (without) adjacent tools ø 75 (150) Max. Tool length: 250 mm Max. tool weight: 6 KG TOOL CHANGE Tool change time (tool/tool): 1.5". Connected load: 20 KVA dimensions LxDxH: 2,650x2,400x3,050m weight: 5,5to

Condition: excellent (used), Year of construction: 2006, HYPERTURN 665 MCplus - Y Multi-axis CNC turning center for complete machining of turn-milled components, featuring integrated spindle motors (ISM) on both main and counter spindles, equipped with a thermo-compensation system (liquid-cooled). Drive power: Main spindle: 29 kW Counter spindle: 22 kW Speed range: Main spindle: 0–5000 rpm Counter spindle: 0–7000 rpm Spindle interface (DIN 55026): Main spindle KK6 (max. bar passage 65 mm) Counter spindle KK6 Y-axis: travel range +/- 50 mm The Y-axis is engineered so that resultant cutting forces are distributed over two axes, ensuring exceptional rigidity for all machining operations. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control. Includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through the counter spindle * 2 x 12-position tool turrets, VDI 30, radial with direction logic for up to 2 x 12 driven tool stations! Swivel speed adjustable via feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0–5000 rpm - C-axis for both main and counter spindle - TRANSMIT software for easy C-axis programming Psdpjyc Sa Hofx Af Iogg * Parts catcher for finished components * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinged belt") * Coolant unit integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar 2 pcs. flushing pumps, 3.7 bar * Control cabinet air conditioning * Electrostatic oil mist separator * Hydraulic unit * Machine lighting * Documentation IMPORTANT: Export/re-export outside the EU is subject to export license requirements. Year of manufacture: 2006 Includes bar feeder High-pressure pump for both tool turrets. Chip flushing for both main and counter spindles. The tool turret for the counter spindle is as new, replaced approx. 2 years ago. Both turrets: 12 x VDI 30 AWZ

Condition: ready for operation (used), Year of construction: 2003, controller manufacturer: SIEMENS, controller model: SINUMERIK, total height: 2,450 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of axes: 3, This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. Additional equipment • Max Torque: 100 Nm (at 5000 RPM), 78 Nm (at 8000 RPM option) • Tool Change Time: T1: 5.8 s, T2: 3.9 s, T3: 3.9 s // Span-to-span Time (VDI 2852): T1: 8.9 s, T2: 7.0 s, T3: 7.0 s • Coolant System: Tank capacity 100 liters / Flow rate 10 l/min / Max delivery pressure 3.7 bar / 4 external nozzles • Lubrication System: Automatic central lubrication for guideways and ball screw spindle / Grease lubrication for main spindle bearings • Pneumatic Connection / System pressure 5 - 10 bar Pgedpfx Ajya Hg Nef Iog • Minimum air flow 750 l/min / Average air consumption 180 l/min • Electrical Connection: Power supply 3/PE ~ 400 V 50/60 Hz / Connected load 15 KVA / Main fuse 35 A slow-blow Machine Benefits Technical Machine Benefits • Qualitative machine benefits: • Reliable tool change system with 12 stations • Integrated automatic lubrication system for guideways and ball screw spindles Technical Specification Taper Size SK 40 Dimensions Machine Depth 2300 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,902 h, travel distance X-axis: 210 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: Sumerik 810 D, number of axes: 3, This 3-axis EMCO turn 365 tcmy was manufactured in 2003, featuring a 12-station tool turret, VDI 30 tool holder, and driven tools with a speed range up to 4,000 rpm. It includes a power chuck, live centre, collet chuck device, and additional tool holders. Ideal for precision turning, this machine offers robust capabilities with a spindle size of 65 mm and a travel distance on the Z-axis of 610 mm. Contact us for more information about this machine. Additional equipment • Oil cooler • Parts catcher Machine Benefits Qualitative Machine Benefits • Machine in very good condition Pgjdpfx Afox D H Ade Iog Technical Machine Benefits • Circular diameter over flat slide: 360 mm • Workpiece size with tailstock: 200 × 520 mm diameter • Tool carrier: 12-station tool turret • Speed range of driven tools: 0–4000 rpm • Operating voltage: 400 v • Frequency: 50–60 hz • Nominal current: 29 a Extra Information Tools Accessories available: Power chuck: KITAGAWA BB08 Live centre from RÖHM Collet chuck device with 11 collets 8 driven tools Various left and right turning tool holders Various holders for boring bars and drills Various turning tool holders for indexable insertsIncludes accessories: 1x Kitagawa power chuck 1x live centre 8x driven tool holders 1x collet chuck with 11 collets 5x boring bar holders 7 x turning tool holders, left and right Dimensions Machine Depth 4000 mm

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 Pgodsqn A Rrjpfx Af Isg coolant ja chip conveyor ja kW generator - rated current 110 A connected load 56 kW

Condition: ready for operation (used), Year of construction: 2007, total height: 1,880 mm, overall weight: 3,900 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 810D with ShopTurn 6.4, product length (max.): 6,500 mm, This EMCO EmcoTurn E65 was manufactured in 2007. It features a swing over bed of 600 mm, a maximum turning diameter of 310 mm, and a bar capacity of 65 mm. Equipped with a Siemens Sinumerik 810D control, it offers high precision and efficiency. If you are looking to get high-quality turning capabilities, consider the EMCO EmcoTurn E65 machine we have for sale. Contact us for further details regarding this machine. • Spindle motor: AC motor, 15 kW (100% duty) / 18 kW (60% duty) • Spindle speed range: Continuously variable, 60 – 4200 rpm • Axis travel: X 210 mm / Z 610 mm • Rapid traverse (X / Z): 24 / 24 m/min • Swing over bed: 600 mm • Max. turning diameter: 310 mm • Max. part length: 520 mm • Max. bar diameter: 65 mm • Chuck: 3-jaw chuck “Kitagawa” BB208 • Turret: 12 stations, all driven tools • Driven tool speed: Up to 5000 rpm • Coolant supply through turret: 25 bar • Tool interface: VDI 30 (DIN 69880) • Bar feeder: Compact Load LM 1200 (max. bar length 1200 mm) • Chip conveyor & pneumatic parts catcher Psdpfx Afsyabuhj Iegg • Connected load: 20 kVAOptional: Tool holders, driven tool holderr and, various clamping jaws for sale. Dimensions Machine Depth 1941 mm

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, number of axes: 6, This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Additional equipment • Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations • B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range • Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners • Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts • Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter • Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Pgjdpfox D Hwnox Af Isg • Hydraulic unit / Machine light / Interface for foot switch / Signal lamp • Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 centre pull / Machine Benefits Technical Machine Benefits • Counter spindle: 22 kw / counter spindle: 0-7000 rpm • Main spindle: kk 6 (passage 65 mm) / counter spindle: kk 6 • Y-axis travel range: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck 210 mm • Approx. 40 capto c4 holders for milling spindle • Loader lm 1200 • Machine does not have shopturn programming. It must be programmed using iso code, whereby simple cycles are available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system Pgjdpfx Ajvt Amujf Ieg

Condition: good (used), Year of construction: 2004, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 100 mm, Universal Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2004 Psdpfx Aex Tzk Rsf Isgg Control: Heidenhain ND-760 display Technical specifications: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard enclosure (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: 1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Clamping wrench • Counter bearing for horizontal machining • Shaft set for horizontal machining • Table enclosure (currently removed) Two identical machines available, both serviced and partially overhauled in Q4-2025.

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Pgjdpfxodctnbo Af Ieg Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW Pgodpowxxdfefx Af Isg >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure Podpfx Ajwxxd Eef Iogg >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal Tool Milling Machine Emco Emcomat FB-450 Linear with Position Indicator – Near-Mint Condition, CE-Compliant!! Technical Data: >> Year of manufacture: 2013 | Machine No.: F9A124962 >> Milling table clamping surface: 800 x 400 mm Psdowycv Ispfx Af Iogg T-slots: 8 Slot width: 14 H8 Slot spacing: 50 mm Maximum load: 150 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rates: 10–5000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 10 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual included >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head >> Rotary table >> Machine vice >> Steady rest About the Machine: For sale is a Universal Tool Milling Machine Emco Emcomat FB-450 Linear with position display, in near-mint condition. The machine comes from a government operation and was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping in both vertical and horizontal operation. Conversion from vertical to horizontal mode is very simple due to the tilting vertical head. The Emco has been mechanically and electrically tested in our workshop. Take advantage of the opportunity to inspect and test the machine under power at our facility.