4
Universal milling machine make EMCO type FB 6 TNC 124
Year of manufacture 2004
technical data:
slide path 700 x 500 x 500 mm
rigid angular table 900 x 500 mm
spindle mounting ISA 40
18 spindle speeds 63 - 3150 rpm.
18 automatic feeds X Y Z
drive power 5,0 / 6,6 kW
with
- TNC 124 linear control
- toolmaking accuracy according to DIN 8615
- hydraulic tool clamping
- cooling device
- automatic central lubrication
- vertical milling head
- swing-out device
- CE-marking
used, in good condition
Gw2e38
3
6
When space is at a premium and maximum accuracy is required, conventional milling machines are in demand. The cycle-controlled milling machines offer an economical alternative for the production of small batches or larger workpieces.Machine highlights:- Pivoting control panel- Right/left rotation of the main spindle- All pinching points eliminated by covers- Hardened and ground shafts and gearwheels- Linear guides- Main motor with spindle brake- Quadruple-bearing radial/axial milling spindle- Si...
5
Universal Tool Milling Machine from Emco apply for toolmaker , mold maker, education and Locksmith
Travel : 600x400x400mm
Speeds : 50-3150 U/min
Taper : SK 40
Table 800x400mm
Travel (X,Y,Z -Achse) 600x400x400mm
Bhzfwqf
Spindle: SK 40
Speeds 50-3150 U/min
Feeds 2-5000
Power supply 50 Hz 3x 380V
Motor 5,5KW
Weight ca. 1750kg
Dimension 1500x2100x1500mm
1
Universal tool milling machine
Fabr. Emco
Type
FB 4
year 2000
Technical data:
Work area:
- Horizontal longitudinal feed of table X: 450 mm
- Vertical table feed Z: 350 mm
- Horizontal cross feed of the headstock Y: 300 mm
Milling tables:
- Vertical table Clamping surface: 400 x 256 mm
- Width of the T-slots: 14 mm (H8)
- Distance between the T-slots: 50 mm
- Number of T-slots: 4
- Admissible workpiece weight: 400 kg
- Rigid angle table Clamping surface: 800 x 400 mm
- Width of the T-slots: 14 m...
2
3-axis digital display
travel X/X/Z 600/400/400 mm
Mvqj7
spindle speed 3150 1/min
tool holder SK 40
fixed table 800x400 mm
9
Work table
Table size 800 x 400 mm
Toolholder DIN 69 871 ISO 40
Cjbz97le
Workspace
Traverse path X-axis 600 mm
Y-axis 400 mm
Z axis 400 mm
Work-piece weight 500 kg
Milling head, swivel R + L ± 90 °
Max torque 500 nm
Spindle speed 36-3.150 1/min
Manual adjustment Quill stroke 80 mm
Feed speed
X-axis min/max. 16 / 800 mm / min
Y-axis min/max. 16 / 800 mm / min
Z-axis min. / max. 8 / 400 mm / min
Rapid traverse x/Y/Z axle 2,000 m / min
Maximum feed force X/y axis 10,000 N
Maximum feed...
3
baked universal tool milling machine
Make EMCO
Model FB-4
Machine no.: F4CP3014
Year of manufacture 2002
with 3 axis digital display Heidenhain
Table clamping surface 800 x 400 mm
Sled run:
longitudinal (X) 450 mm
transverse (Y) 300 mm
vertical (Z) 350 mm
18 mech. feeds:
X + Y 8 - 400 mm/min
Z 4 - 200 mm/min
Rapid traverse:
X + Y 2400 mm/min
Z 1200 mm/min
spindle mount Sk 40
quill stroke 100 mm
18 Spindle speeds 50 - 2500 rpm
Drive motor 2.4/3.2 kW
Feed motor 1,1 kW...
6
When space is at a premium and maximum accuracy is required, conventional milling machines are in demand. The cycle-controlled milling machines offer an economical alternative for the production of small batches or larger workpieces.Machine highlights:- Pivoting control panel- Right/left rotation of the main spindle- All squeezing points eliminated by covers- Shafts and gearwheels hardened and ground- Linear guides- Main motor with spindle brake- Milling spindle with four bearings radial/axial- ...
5
Universal tool milling and drilling machine
with infinitely variable spindle speeds of 10-5000 rpm,
stepless feeds in X, Y and
Z-axis 10-5000 mm/min,
Rapid traverse in X, Y and Z axis 5000 mm/min
Linear guides,
Toolmaker accuracy DIN8615,
Carriage travel X/Y/Z 450/350/400mm,
Power (100/40%ED) 7/10 kW,
hydr. tool clamping DIN 69871
(Type:HAH1P-1.2/105-0.25-3) SK40,
Electrical connection 400/ 50/60 /3,
Workspace protection,
Machine corresponds to the European
Safety standards,
EMCO EASY CYCLE con...
4
The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands in terms of accuracy and flexibility - and that at an unbeatable price-performance ratio.Machine highlights:- Machine stand in compact and vibration-free grey cast iron construction- Pivotin...
7
3
Year : 2004
Siemens 840D
Max ø65mm bars
First Turret with X,Y,Z axis
Second Turret with X,Z axis
Turrets with 12 motorized stations
Ofacd
Parts ejector
Chip conveyor
Machine without B axis
3
see word sheet
7j9hjh
4
Fritz Gross Metal Crosscut Saw FB 90 2/4
1.5 KW at 1400 rpm
Bkqjsabe
2.2 KW at 2830 rpm
Saw blade 250 mm
Dimensions LxWxH 60x85x130 cm on Euro pallet
incl. inlet roller conveyor 4 m and drain roller conveyor 2 m
5
5
3/2 way valve, mini solenoid valve, solenoid valve, pneumatic valve, air valve, pressure valve
Valve block, control block
Qlvrsxbfa
-Type: 6012-C-1,2-FB-PA
-Price: per piece
-Number: 6x available
-Weight: 0.2 kg
1
Pictures Follow!!!!!
Dual fuel burner Weishaupt RGL50/2-A -Version ZM-NR
Power 600-5400KW:
year of construction:2008
Oil throughput 95-453kg/h
With existing fittings Dungs DN65
Freight forwarding worldwide possible.
Мы говорим по русски!
Visits please only after telephone arrangement!
Preferred sale to dealers, tradesmen or export.
Bpaddgoxbf
All information without guarantee, errors and prior sale reserved.
The seller is not liable for typing and data transmission errors.
Gladly we take yo...
7
Weishaupt GL 30/2-A dual fuel burner -Version Z:
Output 300-2150KW:
year of construction:2001
Oil throughput 40-180 kg/h
With existing fittings Dungs DN50
Мы говорим по русски!
Visits please only after telephone arrangement!
Preferred sale to dealers, tradesmen or export.
All information without guarantee, errors and prior sale reserved.
The seller is not liable for typing and data transmission errors.
Ct2ryfs3
Gladly we take your used boiler or burner in purchase!
Of course we also take c...
1
Emco E-275 Ã 555 x 1500 mm CNC
Dtscaawqu
9
turning diameter 550 mm
Bmbqzerbgr
turning length 2000 mm
control Fagor
weight of the machine ca. 3.9 t
dimensions of the machine ca. 2.1x1.91.2 m
4
The machine is in a very good condition.
Tools and 3-jaw chuck can be obtained optionally.
VT260 MY (ISM) - Siemens 840 D
VERTICAL LATHE WITH PICK-UP
FUNCTION, DRIVEN TOOLS
AND Y AXIS
LOADING LEFT
29 kW drive power,
280 Nm drive torque,
0-5000 rpm speed,
linear guidance system,
direct encoder on the spindle.
Chip ejection to the rear
- 12-station tool turret VDI 40 with
Directional logic for up to
12 driven tool holders!
Drive power 8,5 kW
Torque 40 Nm const.
Speed range: 0-4000 rpm
- Multi-fun...
5
turning diameter:38 mm
turning length:210 mm
control:840
bar material dia.:20 mm
turning speed range:20-5000 U/min
rapid traverse: longitudinal and cross:12 / 8 m/min
spindle passage:38 mm
spindle drive:11 kW
total power requirement:15 kW
weight of the machine ca.:2,6 t
CNC Double Turning Center with 4 Axis
Live tools on both turrets
2 turrets 12 - fold, each driven 4 - fold
Tap spindle on both main spindles
Toolholder VDI 16
C-axis 0,08 ° resolution on both spindles
bar loader "FMB Dopp...
9
EMCO - TURN 420 MC - 2005 - REF 420-1
Rncmonah
5
Cycle lathe Emcomat E200x1000
Fully functional
Ckqzywaec
with many accessories (tool holder, lathe chuck, jaws)
4
4
x-travel 420 mm
y-travel 330 mm
z-travel 400 mm
Control TM02
weight of the machine ca. 2500 t
Ogut9
dimensions of the machine ca. 230x185x245 m
9
I am selling spare parts for Emcoturn 120 ąnd emcoturn 220 both with Emcotronic T2 controller.
-Spindle motor
- Axis motors
Dmk02kl
- Spindle encoder
- housing with guides spindle and pneumatic cylinder
- revolver
- x and z axis spindle
- tailstock
- rohm chuck (for 120)
- emcotronic t2 controller with all components
- other accesories
Manufacturer Emco
Machine type PC-Turn 120
Control Siemens Sinumerik 810D / Fanuc Series 0
Swing over bed 180 mm
Swing over cross slide 75 mm
Turning lenght max. 121 mm
Z- travel max 172 mm
X- travel 55 mm
Spindle bore 20,7 mm
Main spindle 150 – 4000 U/min
Tool turret 8-position
Tested and fully functional
Options/accessories:
tool holders
chuck
documentations
control panels (Siemens/Fanuc)
Bnyd72z
tool trolley
collets
etc...
Under power in ouor warehouse.
14
EMCO - EMCOTURN 320 - 1990- control system: SINUMERIK 810T/GA 1, FANUC OTB - X axis: 56 mm - Z axis: 176 mm - height of spindle from floor: 1100 mm- height: 1580 mm - installation area: 2200x1000 mm - weight: 750 kg
Bmwj8ikwco
4
Emcoturn 342
with Siemens SInumerik control
fully functional, very good condition
few hours
very much accessories (tool holder, collets)
Bpzw2gvvpz
6
Whether prototype construction, maintenance or, most importantly, training - EMCO's conventional and cycle-controlled machines manage the balancing act and offer maximum accuracy in the smallest possible space and flexibility down to the last detail. Highlights of the EMCOMAT 20D- Main spindle DIN55029- Tailstock (eccentrically adjustable)- Simple steel holder (clamping claw)- Belt drive for feed gear- Chuck protection with electric limit switch- Optional equipment such as coolant device, slidin...
6
angetriebene Werkzeuge, 2-Spindel,2- Gegenspindel
Spindeldurchlass: 38 mm
Max Stangendurchmesser: 20 mm
Abstand zwischen den Spindeln: 408 mm
Spindeldrehzahl: 5 000 U./min
Arbeitsbereich X1/X2: 78 mm
Arbeitsbereich Z1/Z2: 210 mm
Revolverkopf: 2 x 12 St.
Bjxxtaijxw
Gesamtanschlussbedarf: 15 kVA
Gewicht: 2 600 kg
Stangenlader: FMB Doppellader ET 425
Ölnebelabscheider Bristol „EF“ David, mini, R1S 670
Steuerung: Siemens 840 D
2
EMCOMILL 1200 SIEMENS 12,000 rpm
VERTICAL 3-AXIS MACHINING CENTRE
Control: SINUMERIK 828D
Most modern control technology included
ShopMill dialog programming!!
Digital drive system
Spindle: Mechanical spindle
Speed: 50 - 12000 rpm
Output: 15 kW / S6
Torque: 100 Nm / S6
Bmu3v2yh0s
Tool holder: ISO 40 DIN 69871
Tightening bolts: ISO7388/2 Type B
(not included in the basic machine)
Travels: X=1200mm, Y=610mm, Z=500mm
distance spindle nose table: 175-675 mm
Rapid traverse speed X, Y, Z:
30 m/min
Mac...
- CNC-lathe -second hand-
- EMCO-PADOVANI Typ EMCOMAT E200 x 1000
- center hight app. 200mm
- distance between centers app. 1000mm
- spindle hole app. 55mm
- bal screw, central lubrication
- electrical power app. 17KVA
- accessories: SCHUNK - 3-jaw chuck DIA 200mm, MULTIFIX "B" with 5 holders
- control: FAGOR 8055T
- weight app. 3t
Bocojpsrnq
7
EMCO - TURN 332 MC - 2008 - REF 332-4
Stsihc
3
CNC vertical lathe
Manufacturer: EMCO
Machine model: VT 250 MY
Control: Siemens 828 D
Year of construction: 2014
TECHNICAL SPECIFICATIONS
Travels
- Y axis: (mm) +/- 90
Tool carrier
- tool places: 12
- Tool holder: VDI
Oe2tt
EQUIPMENT FEATURES
- High pressure pump for cooling system 14 bar
- Clamping means blow-off device
- Chip flushing system
- Drag frame belt
- Foot switch
- Electronic handwheel
4
The EMCOMAT E-200 MC primarily addresses production-oriented users. The machine is characterized by high cutting performance, high precision and universality in application. The generously dimensioned working area enables the machining of large workpieces. For precise positioning of the axes, the EMCOMAT E-200 MC is equipped with backlash-free recirculating ball screws. The machine can be used manually with the handwheels or feed buttons and also as a cycle controlled lathe with Sinumerik 828D f...
13
The machine is really in good condition.
a year ago new X and Y axis ball screws
completely new module.
new coolant emulsion pump
new Z-axis cover
New windows
grippers hand grips,
pulley.
about 50 holder and collets, keys are included with the machine.
the machine is quiet, it doesn't throw anything, it doesn't whistle, the spindle doesn't hum !!
Bncp8ssfdd
X - 1200
Y - 600
Z - 600
spindle 8000rpm
ISO SK40
tool magazine - 25
Heidenhain iTNC 530
4
EMCOTURN E 25 TCM - SINUMERIK 828D
2-AXIS CNC LATHE WITH TAILSTOCK
AND DRIVEN TOOLS AND C-AXIS
5.5 kW drive power, 60-6300 min-1
Speed, rod passage: ø 25mm, lin.
guide system, digit. drive system.
Control technology SINUMERIK 828D with
ShopTurn dialog programming.
Includes:
o 12-station tool turret VDI 16 axial
with directional logic for up to 6
driven tool holders!
max. drive power 1,2 kW
max. torque 4 Nm
Speed range: 0-6000 rpm
o C axis for main spindle
o Spindle connection ø 70 h5
o...
3
Didactic computer-controlled CNC machining center with interchangeable control, added licenses FANUC 21, Siemens 840 and Heidenhain 426 Basic technical data: • Workbench dimensions (LxW) 420x125 • Workbench design with "T" grooves • Workbench load 10 kg • Stroke on the 'X' axis 185 mm • Stroke on the 'Y' axis 100 mm • Stroke on the 'Z' axis 200 mm • Art. spindle speed from 150 - 5000 min-1 • Fast movements along the 'X', 'Y', 'Z' axes • N...
8
EMCO - TURN 332 MC - 2006
Bhg78z9v2y
9
CNC double spindle turning-milling centre HT65DT SM2Y-BigBore / Siemens 840SL ShopTurn
Options:
-BigBore spindle passage 76mm
-Shopturn extension package
-Energy Management
-OPC-UA interface / BDE signal
-Installation and fixing material
Bmchnk0ikp
-parts catching device
-Emco Bar Loader Interface
-machines Status lamp LED
-Fabricated part accumulating conveyor
-short bar loader 1200mm with interface connection
-25 bar high pressure coolant pump
-Cleaning gun Multiflow
-oil mist separator
-chuck...
13
Many EMCO Cnc multispindle cnc lathes are fore sale. Mfg from 2001 - 2005. barfeeder, FMB, subspindle, C axis, live tool turrets, 2 turret. main- and subspindle. Part catcher. Mist collector. The machinen will be sold becuase of company closing (the owner retires on pension). Loading on truck is possible within the prices.
Machines as following:
- EMCO Emcoturn 420 - Mfg. 2001, 2004, 2005 - 6x
Nvacb
The machines have many spare parts on stock and futher accessories. They can be purchased for ext...
6
CNC-Drehmaschine, gebraucht
CNC turning lathe
Hersteller/ make: EMCO
Modell/ model: EMCO Turn 325
Baujahr/ year: 2001
Steuerung/ control: Fanuc Series 21-TB
Umlaufdurchmesser über Schlitten /
swing over carriage: 75 mm
Umlaufdurchmesser über Bett/
swing over bed: 180 mm
Drehlänge / turning length: 140 mm
Spitzenweite / distance b/n centers: 233 mm
Werkstückgew./ weight of work: 3 kgs
Spindeldrehzahl/ spindle speeds: 0-6.300 U/min
Spinde...
3
CNC lathe EMCO 425 Sinumerik 810 (CNC double spindle with 2 main and 2 counter spindles) Year of manufacture: 1995 technical data: Operating hours: approx. 89756 h (switched on) prepared for bar guiding / magazine Bar capacity 26 x 120 mm Turning length Driving power: 11 kW Speed range 20-5000 rpm with EEZ up to 4000 rpm and spindle indexing 3° every 4 spindles Tools: VDI 16 (12 pieces) and/or 4 x EEZ Space requirement approx. 2,5 x 2,2 x 1,8 m Weight: 2600 kg
Oldu2
8
Emco 332 MC,
year of construction 2001
Siemens control system,
Turning length 480 mm,
Obyfx
Turn Ø 220 mm,
Revolver 12 times VDI 25 all stations driven,
C axis 0.01°,
Main spindle up to 6,300 rpm
Bar machining up to 32 mm,
Accessories,