Used Air Cushion Table for sale (40,939)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Iodpfetttafox Ac Eetk Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Itsdpfx Acjzmnyie Esk Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° Itedozcpixepfx Ac Eok - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Itedpfx Aoy Iwy Dec Esk Optimized saw blade extension PC operator interface in English

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Machine attachments: - Roller table at the rear: 3982 mm - Support beam at the rear: 9 pieces, 40 x 4056 mm Iedpjzuy Egsfx Ac Eotk - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm - Clamps: 9 pieces, adjustable - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation. Main Advantages of the Machine High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials. 5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades. Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels. Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability. Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit. Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels. Automatic blade lifting system – improves convenience and safety during setup. Construction and Technology The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy. The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications. High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes. Precision and Working Efficiency The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds. The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces. With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications. Standard Equipment Main motor 5.5 kW and scoring motor 1.1 kW Cutting unit with tilt and height adjustment Sliding table 3200 × 420 mm Crosscut fence and rip fence with precision adjustment Tilting upper blade guard Integrated dust extraction system with Ø100/80 mm outlets Blade angle and height indicators Complete technical documentation Technical Specifications Parameter Specification Main saw blade diameter / bore 350 / 30 mm Saw blade tilt range 0°–45° Main blade speed 2800 / 4000 / 4800 rpm Scoring blade diameter / bore 125 / 20 mm Scoring blade speed 7500 rpm Work table dimensions 945 × 720 mm Sliding table dimensions 3200 × 420 mm Maximum cutting height 100 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3200 mm Dust extraction outlet under table Ø100 mm Isdpfx Aovuf Iqec Eetk Dust extraction outlet on blade guard Ø80 mm Minimum air velocity 20 m/s Minimum air flow 565 m³/h Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 1.1 kW / 1.8 HP Weight 850 kg

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 Itsdpjy Iplfjfx Ac Eok 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection Isdey Tp E Aspfx Ac Eetk - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing Isdpfx Aoy Ryrbsc Estk - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total length: 6,700 mm, working width: 650 mm, total width: 1,100 mm, table length: 5,200 mm, Canol Make-Up-Line "Canolino" 5.2 (with about 670 cm overall length) Make-up-table / -line / dough-processing-line "Canolino" 5.2 with about 65 x 520 cm working belt, year 2004, designed to produce a wide variety of products like puff- pastry products with odr without filling, yeasted products and other pastry specialities. The "Canolino" line is easy to use and mounted on wheels, it comes with a dough-belt calibraion head, a huge varity of different cutting rollers (incl. croissant roller or special roller for "Stutenkerle" (=sweet-yeast-dough / gingerbread-man), a water-drop humidification station, a volumetric filler (V4 F) / electric screw-depositor with 4 outlets, suitable for dosing creamy products with spot, continuous or intermittent dosing, a motorised winding roller, for example for snails or other wound products, various winding and folding tools and pressure rollers as well as a motorised guillotine knife for cross-cutting. Perfect for the use in small and medium-sized bakeries. The wide range of easy-to-use and also easy to mount accessories can be changed in a short time nearly without tools. The electric guillotine can also be moved on the desired position. The make-up table is manual controlled for very simple operation and managing the various work functions. All components and accessories are electrically operated (also filler, guillotine knife) so there is generally no need to use compressed air. The make-up-line and all accessories (as shown in the photos) are in good "bakery-condition" and are offered for sale fully cleaned and ready for use. Dimensions: approx. 670 cm in total length, approx. 110 cm in width and approx. 195 cm in height (control unit and filling station) Iedpfx Acoy Na T Nj Ejtk

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Itedpfswwlk Nsx Ac Ejk

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Itedpfjzgh Tvex Ac Eok The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Itjdpfxjy H Errs Ac Ejk Front support roller 2 pneumatic quick clamps Digital mitre gauge L CNC parallel fence

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale – Itsdpszviaijfx Ac Eok

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Itodeztkfbjpfx Ac Ejk Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, Year of construction: 1991, Technical details: feed pressure: 10 bar volume capacity: 4,05 m³/min Isdou Nz Dnjpfx Ac Ejtk liter capacity: 4050 l/min Number of working hours: 16160 h total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar *

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Iodpjzvb E Djfx Ac Estk - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Iodsyq R E Repfx Ac Eotk

Condition: ready for operation (used), Year of construction: 2021, operating hours: 4,225 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 0i-MF, total height: 3,570 mm, total width: 3,523 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 3,700 mm, number of axes: 5, This 5-axis HWACHEON D2-5AX 12k was manufactured in 2021. It features an X-axis travel of 600 mm, Y-axis travel of 550 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 places. If you are looking to get high-quality machining capabilities, consider the HWACHEON D2-5AX 12k vertical machining centre we have for sale. Contact us for further details. - Control Unit: Fanuc 0i-MF with 15" Color Screen, Manual Guide i / TWP, Data Server 4 GB- Max. Feed Rates (X/Y/Z): 24,000 mm/min- Rapid Speed (X/Y/Z): 36 / 30 / 30 m/min- Rapid Speed (B/C): 25 U/min- Table Diameter: 600 mm- Max. Workpiece Weight: 500 kg- Table Height: 500 mm- T-Slots: 14x100 mm- Spindle Speed: Up to 12,000 rpm- Spindle Drive Power: 37 / 18.5 kW- Spindle Torque: 250 Nm- Spindle Taper: SK-40 DIN6359 / DIN69872A- Tool Magazine Places: 30 places (Optionally 40 places)- Max. Tool Length: 300 mm- Max. Tool Diameter: 80 mm (130 mm adjacent empty)- Max. Tool Weight: 8 kg- Tool Change Time: 1.8 sec- Internal Coolant Supply (IKZ): 30 bar, 13 l/min- Coolant Tank Capacity: 250 L- Measurement Systems: Renishaw OMP40-2 tool measurement with IR transmission, Blum tool setter- Software Options: HTLD, HTDC, Optima, HAI 400 Block, Fanuc Helical Interpolation, Program Restart, HRCC- Total Electrical Power: 70 kVA- Rated Voltage: 3 / 220 V, 50 Hz- Operating Air Supply: 0.5 - 0.7 MPa- Control On Time: 16,460 h- Operating Time: 5,550 h- Machining Time: 4,225 h Technical Specification Taper Size SK 40 Iedpfx Ajzu Rqajc Ejtk

Condition: used, Year of construction: 1994, - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW Panel dividing saw Manufacturer: Panhans Type: 693 / EURO 30 Year of manufacture: 1994 Technical data: - Cutting length: 5800 mm - Cutting width: 5150 mm - Main saw power: 11 kW - Scoring saw power: 1.5 kW - Rear support table (divided): 1 piece, 370 x 4910 - Rear support beams (with rollers): 9 pieces, 40 x 4910 mm - Front sliding support table (with 3 infeed rollers on the end): 3 pieces, 600 x 1800 - Miter table: adjustable - Air cushion miter table: adjustable - Angle table: left - Air cushion table left: up to 2020 mm - Clamping jaws: 7 pieces, floating Scoring jaws: 4 pieces Special accessories: Color screen, graphics, online I Itodpfx Aozuy D Ajc Esk Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,189 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430PB, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Matec HV30 was manufactured in 2004. It features an X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Heidenhain TNC 426/430PB control and a maximum spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec HV30 universal machining centre we have for sale. Contact us for further details. - Rotary Table Diameter: 800 mm- Axes: 3-axis (X/Y/Z)- Swivel head: ±110°, 1° indexed positioning- Head indexing: Incremental, 1° steps- Coolant / Compressed Air Supply: 40 bar through the spindle- Number of Spindles: 1- Tool Magazine Slots: 36- Input Power Type: Three-phase current- Additional Equipment & Features: D800mm rotary table installed, chip conveyor, paper band filter unit, documentation/manual, continuously variable speed Itedpfjzvc Awex Ac Eok Technical Specification Taper Size SK 40

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) Ijdjillukopfx Ac Eotk OPTIONAL: Optimisation software: HPO

Condition: used, Year of construction: 2022, functionality: fully functional, BASIC TECHNICAL SPECIFICATIONS: Working dimensions: - X-axis: 3000mm (practical maximum length is unlimited), - Y-axis: 950mm, - Z-axis: 80mm (maximum workpiece thickness), 250mm from the console. Travel of working axes: - X-axis: 1475mm (1200mm without workpiece handover), - Y-axis: 1550mm, - Z-axis: 225mm; Axis drive system: X-axis: gripper movement via toothed rack, Y-axis: via toothed rack, Z-axis: lead screw Travel speeds: - X axis: 90m/min (with open grippers) / 25m/min (with closed grippers) - Y axis: 90m/min - Z axis: 18m/min. - Required compressed air pressure: 8 bar (at the inlet), 6 bar (min. operating) External dimensions: - Length 2075mm (one module) x Width 2400mm x Height 2274mm Ijdpezp Nzgefx Ac Eotk Construction: Monolithic steel frame. Machine weight: 1950 kg. MILLING UNIT: - Motor power 12kW (S6 class, max. power at 12,000 rpm) - Spindle speed 1,000-24,000 rpm (controlled via a frequency converter), - Motor cooling is air-cooled. Bearings are ceramic. - Pneumatic tool clamping, HSK-F63 type, via a tool magazine (collets with a diameter of 0-20mm, ERG-32 type). - Pneumatically controlled extraction hood in 2 positions - Maximum tool weight is 7.5kg (depending on the spindle speed). Drilling unit with built-in saw in the X-axis, model DH-17 6H 1S. - UPS system for uninterruptible power supply - Barcode reader - wireless - Device for automatic tool length measurement - Optical display of machine status on the console - Additional sealing on all guides - Air cushion on the inlet and outlet table - Workpiece placement at the rear of the machine - Larger drilling unit DH25 8H 1S (25 drills) - Additional pneumatic front support for longer workpieces

Condition: new, Year of construction: 2026, DT2200M Downdraft Grinding Table The DT2200M is a professional downdraft grinding table designed to provide a safe and efficient workspace for metal grinding applications. Equipped with a high-performance filtration system and dual extraction fans, it is ideally suited for demanding industrial and workshop environments, effectively reducing airborne dust while improving operator safety and comfort. Key Features Dual-stage filtration system efficiently removes grinding dust and airborne contaminants High extraction capacity – two centrifugal fans rated at 4,000 m³/h each provide continuous operation with reduced filter replacement frequency Large working surface – the 2060 × 530 mm worktable accommodates larger workpieces with ease Heavy-duty construction – robust steel housing with spacious metal waste drawers on both sides of the table Construction and Technology The DT2200M features an 11-section work surface, providing flexibility for securing and processing various workpieces. An integrated downdraft and side-draft extraction system captures dust directly at the source, significantly improving air quality within the workspace. The high-temperature-resistant filter cartridges are designed for extended service life in applications involving elevated heat generation. Please note that the filters are heat-resistant but not fire-resistant. Precision and Performance Itjdpszqy Rujfx Ac Esk Thanks to its high static pressure and two centrifugal extraction fans, the DT2200M achieves a filtration efficiency of over 99.9%. Independent filtration units and a quick filter replacement system reduce maintenance time while ensuring consistently high extraction performance. Applications The DT2200M is suitable for use in: Metal fabrication workshops Industrial paint shops Maintenance and repair departments Manufacturing facilities specializing in metalworking Standard Equipment Two centrifugal extraction fans Four filter cartridges (395 × 495 × 24 mm) 11-section work surface Metal waste collection drawers on both sides Integrated workpiece clamping fixtures Technical Specifications Specification Value Work Surface Dimensions 2060 × 530 mm Motor Power 2 × 1.0 kW Airflow Capacity 2 × 4,000 m³/h Filter Size 4 × (395 × 495 × 24 mm) Power Supply 230 V Weight 130 kg Overall Dimensions 2200 × 600 × 850 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FlatCom M30 DoppelFlat 75-35 was manufactured in 2016. It features a complete sound-insulated safety enclosure with sliding viewing doors and a swivel-mounted CNC control console. The machine is equipped with a top-mounted multi-port suction hood and integrated pneumatic pressure regulators. If you are looking to get high-quality milling capabilities, consider the ISEL FlatCom M30 DoppelFlat 75-35 gantry milling machine we have for sale. Contact us for further details. Iedpfxozu Rtuj Ac Estk • Machine Type: CNC Gantry Milling (Double Flat / Twin Table Station) • Enclosure: Complete sound-insulated safety enclosure with sliding viewing doors • Control Unit: Swivel-mounted CNC control console with monitor, keyboard, touchpad, status indicator lights, and key switch • Operator Controls: Standalone two-hand safety control pedestal equipped with palm switches and emergency stop button • Extraction System: Top-mounted multi-port suction hoods with 4 flexible extraction hoses • Cooling & Climate Control: Cabinet-mounted enclosure air conditioning/cooling units • Pneumatic System: Integrated pneumatic pressure regulators, air filtration assembly, manifold block, and coiled hose connection • Safety Equipment: Red/Green signal tower light mounted on the frame