Used All-Wheel Drive for sale (47,342)

Condition: excellent (used), Interroll roller conveyor 0.99m with drive The Interroll roller conveyor element is in a very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400mm Length: 990mm Iasdpfx Abjhvmi Tsvsu Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, For sale: Band-All BA32-102 Banding Tool The Band-All BA32-102 is a high-quality, durable banding tool designed for heavy-duty applications. It efficiently secures bundles with precision, offering ease of use and long-lasting performance. Perfect for industrial and commercial use, this tool ensures a tight and secure band every time. In excellent condition and ready for immediate use. Isdpsv Sq Hyjfx Abvoau Contact for more details or to arrange a viewing! For sale: Band-All BA32-102 Banding Tool

Year of construction: 2007, condition: like new (used), Offered from a bankruptcy is a ready-made punch Iasdpfx Abod En Nfeveu Manufacturers all mecanic Model 994592 Built in 2007 Masch.Nr. 905245 The punch is still unused. pneumatic foot switch + 3000mm fence Art.Nr. 994895 + 2000mm stroke Art.Nr. 994894

Condition: new, functionality: fully functional, empty load weight: 4 kg, in original packaging, without any warranty whatsoever Iedpjyftbwjfx Abvsau

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Iasdpeyxz Rhofx Abvou

Condition: new, Board separator conveyor Outfeed after HewSaw Manufacturer / model: Drive experts UK CA Type: 3E100L4D-FC-A0-D36 Power: 3.0 kW RPM: ~1450 rpm (50 Hz) Iaodpfx Aboyknpmjvou ~1750–1760 rpm (60 Hz)

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. Iasdpfx Absq Nf S Rovou 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2024, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Iajdpehwrlxjfx Abvsu Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Iaodpfxevtcvie Abvju Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: excellent (used), Year of construction: 2016, Ref: 11070 . 2016 ‘Heidelberg’ Stahl TH82/644-PFH Folding Machine Iaedpjyk H H Rjfx Abvsu High performance all buckle folding machine with auto setting (no sound hoods). Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Digital microprocessor control with self-learning function for signature length & spacing with run monitoring, total and batch counter with memory. • Touchscreen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • VSA 56 vertical stacking delivery. Including compressor, tools, spares & manuals. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 52cm with 4 plates, perforating/scoring shafts Gate fold attachment Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Condition: good (used), mileage: 37,034 km, color: white, lifting height: 27,000 mm, Year of construction: 2020, operating hours: 133 h, Drivetrain Make of engine: Mitsubishi Weights Empty weight: 3.500 kg Functional Lifting capacity: 400 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Operates with deficiencies: Yes Front tyres / undercarriage remaining: 85 Rear tyres remaining : 85 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information Ijdpfx Aezd Rymobveau Böcker HL27 Agilo Furniture lift mounted on a Mitsubishi Fuso 3513 construction year 2020 with only 133 hours and 37.034 kilometers. The lift is like new and has a capacity of 400 kg and is equipped with a rotating XXL basket, top/down movement, retractable rear support legs, remote control and a big storage box. Changes and typographical errors reserved.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Iedpfx Aszdny Rsbveau Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, machine/vehicle number: X336W00755E30, Year of construction: 2008, operating hours: 15,254 h, load capacity: 3,000 kg, lifting height: 6,650 mm, free lift: 2,360 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork carriage width: 1,140 mm, fork length: 1,240 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: X336W00755E30 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 23x9-10 Ijdpjzdwibsfx Abvjau Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 18x7-8 Rear tire condition: 0 - 20% Battery voltage: 80V Battery Ah: 625Ah Battery year of manufacture: 2019 Battery condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, hire purchase, and financing at attractive rates are always possible for us. We would also be happy to buy your used equipment outright, even without you purchasing a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our facility. Side shifter, 3rd valve, half cabin.

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm Iedpjxuv Udofx Abvsau grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: new, Screw gear RTP 502-000-8 GROB 40:23 240/01 00000 Screw gear GROB RTP 502-000-8 Iajdpfx Aozd Ny Sjbvsu Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: Screw gear Drawing number: 90010016737 Packaging: Wooden crate Condition: unused, packaged

Condition: used, FIDIA SLU 2 Platine Iedpfx Ajzdvfuobveau

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 148 h, load capacity: 5,000 kg, lifting height: 4,885 mm, free lift: 2,270 mm, fuel type: electric, mast type: triplex, construction height: 3,300 mm, empty load weight: 8,835 kg, drive type: Elektro, Electric four-wheel forklift Ijdpfx Aezdwbwebveau Load center: 600 Mast type: Triplex Technical condition: very good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2017 Battery condition: 80 - 100% Description: The vehicle will be inspected according to UVV regulations. Before delivery, the machine will undergo servicing and cleaning. Upon request, the machine can be repainted for an additional charge. Side shifter, 3rd valve, rear work light, front work light, full cabin, full free lift.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 817 h, load capacity: 3,000 kg, lifting height: 6,430 mm, free lift: 2,044 mm, fuel type: electric, mast type: triplex, construction height: 2,824 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Iodpsy N E Ekofx Abveau ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 625Ah Battery type: PzS Battery year of manufacture: 2019 Side shifter, 3rd valve, rear work light, front work light, heater, full cabin, full free lift, joystick, seat.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,723 h, load capacity: 2,000 kg, lifting height: 4,765 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, fork carriage width: 980 mm, fork length: 1,100 mm, empty load weight: 3,416 kg, drive type: Treibgas, LPG Forklift Load centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Non-marking Iedpfezdl Dmox Abvoau Front tyre size: 200/50-10 Rear tyre type: Non-marking Rear tyre size: 18x7-8 Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our units are workshop-inspected and certified according to FEM 4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we will also buy your used equipment, even if you do not purchase a machine from us. Lease-purchase and financing options available upon request at attractive rates. We are happy to offer expert and detailed advice on our vehicles. Specifications: Side shifter, 3rd hydraulic valve, rear work light, front work light, heater, load guard, full cabin, full free lift, safety light, non-marking tires, interior mirror, joystick, beacon, windscreen wiper, single pedal, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 5,028 h, load capacity: 1,600 kg, lifting height: 3,620 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, fork length: 1,400 mm, empty load weight: 3,186 kg, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Electromechanical Technical condition: very good Front tire type: Non-marking Front tire size: 18x7-8 Rear tire type: Non-marking Rear tire size: 16x6-8 Battery voltage: 48V Battery capacity: 625Ah Battery year of manufacture: 2013 Description: Includes charger Isdpfx Ajzdl Dgsbveau Side shifter, 3rd valve, front work light, roof protection, windshield, full free lift, safety light, multi-function lever, single pedal operation.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,170 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 – 4,999 kg Mast type: Triplex Transmission: Automatic Condition: New equipment Technical condition: New Battery voltage: 80V Iaodpfjy Hyk Nox Abvou Battery type: Lithium-ion Battery year: 2026 Description: Brand-new machine including 12 months warranty. Anton is a collaboration with EP Forklift (China) and is suitable for light-duty applications. Battery: New Li-ion including integrated charger. Affordable transport can be arranged on request. Lease-purchase is generally possible! We are an official Jungheinrich partner. Sideshifter, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,599 h, load capacity: 2,000 kg, lifting height: 4,400 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Iaodpozdlvpefx Abveu Battery year of manufacture: 2019 Description: Price includes a new UVV inspection. Paintwork in very good condition (original). The 2019 battery will be regenerated using a power cycler including a Kappa test. Charger included with connector. We will gladly arrange cost-effective transportation for you. A lease-to-own option is generally available! We are an official Jungheinrich partner. Side shifter, 3rd valve, rear work lights, front work lights, STVZO compliant, full free lift, CE certificate, safety light.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 419 h, load capacity: 1,800 kg, lifting height: 6,075 mm, free lift: 2,069 mm, fuel type: electric, mast type: triplex, construction height: 2,671 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Iasdpfxey Nt Tie Abveu Condition: Ready for use and fully functional Technical condition: good Front tire type: Non-marking Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Battery year of manufacture: 2021 Side shifter, 3rd valve, rear work light, front work light, windshield, half-cab, heater, full free lift, joystick, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, load capacity: 1,600 kg, lifting height: 5,650 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 3,450 mm, drive type: Elektro, Electric 4-wheel forklift Ijdpfjzdltzjx Abvsau Load center: 500 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: 80 - 100% Side shifter, 3rd valve, rear work light, front work light, full cabin, joystick, LED, seat.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,162 h, load capacity: 2,000 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric four-wheel forklift Mast type: Triplex Condition: Ready for use and fully functional Iedpfx Abezc Slvoveau Technical condition: good Battery voltage: 48V Battery type: PzS Battery year of manufacture: 2018 Side shifter, 3rd valve, partial cabin