Technical characteristics
Carriage 3200 mm with double rollers
Blade Ø 400 mm, hydraulic tilting
Scoring machine
2vauey
Transverse guide
Double stop
Rip fence 1300 mm
Fine adjustment rip fence
Motor 5.5 kW
Machine in very good condition Power and Motors
Pluging: Three-phased Overall dimensions
second hand
Make Altendorf
Type F 90
Year of construction 1970
Machine no. 70-3-13
Engine 5.5kW
Trolley length approx. 2500 mm
Cutting width approx. 800 mm
Extraction connection D 120 mm
Space requirement approx. 2500 mm x 1400 mm x 1000 mm
Cgx9ss8sbx
Weight approx. 900 kg
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guarantee
Technical characteristics
Carriage 3200 mm with double rollers
Blade Ø 400 mm, hydraulic tilting
Transverse guide
Double stop
Rip fence 1300 mm
Da0gcwq2
Fine adjustment rip fence
Motor 5.5 kW
Machine in very good condition Power and Motors
Voltage: 380 V Pluging: Three-phased Power: 6 Kw Motor: 7,5 CV Overall dimensions
The document holder directly on the control at eye level is practical.
Bnd2ifum
The parts lists are fixed by a clamp. so you have a permanent overview of your orders.
M62003
Double-sided mitre fence DUPLEX
Year of manufacture approx. 2004
cutting to length up to 1350 mm
in very good condition from school use
for machines type F 45 year of construction from March 1998 with double carriage guides made of steel.
The DUPLEX fences allow angle cuts from 0 - 90° very fast,
precise and infinitely variable.
When set to 45°, the mitre can be cut on both sides of the workpiece without adjusting the two stops.
on both sides of the work piece without adjusting the two stop...
Sliding saw
Qynsz
Altendorf F45
Machine no. 94-01-225
Year of construction 1994
Saw blade 350mm
Roller table 3200mm
45 degrees tiltable
415V
5,5kW Motor
With scoring unit
Technical characteristics
Carriage 3200 mm with double rollers
Blade 350 mm max
Clulyjv
Manual tilting 45°.
Manual raising/lowering
Parallel fence 1000 mm
Swivel cross fence
Old quality machine Power and Motors
Overall dimensions
used, good condition
Make Altendorf
Type F 90
Year of construction 1985
Ncp32beh
Machine no. 85-8-172
GS tested
Motor boosted 5.5 kW
Trolley length approx. 2800 mm
Cutting width approx. 800 mm
max. blade diameter 450 mm
parallelogram protection
table top extension
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guarantee
Sliding Table saw
Altendorf C90 CE
Machine no. 97-10-611
Year of construction 1997
Saw blade 315mm
Roller table 3200mm
Ce2ga8bejr
415V, 10.5Amp.
4kW Motor
With scoring unit
-New-
CE version
- The WA 6 is the smallest Altendorf sliding table saw,
that exist.
- Despite its smaller dimensions, it impresses
great achievements.
- She trumps herself with her strong equipment
big in the smallest space.
- The cutting quality and flexibility are outstanding
in daily use.
Technical specifications:
Double trolley length 2000 mm
Motor 4 kW, speed 4200 rpm.
Scoring unit 0.37 kW
Cutting height max. 100 mm, at 45° max. 72 mm
B93vesd9xy
manual height and swivel adjustm...
Altendorf format saw with carriage
320cm carriage,
undercutter on separate motor 0,75KW
up and down saw electrically adjustable
culaga on the right side motorically adjustable
Cf7a9cuq2j
motor 5.5KW
4 cutting speeds
saw max 350mm
380V power supply,
solid saw for both board and wood
Sliding saw
Altendorf F45
Year 1990
Roller table 2800mm
Main motor 5.5kW
380V
Max saw blade diameter 350mm
Rbzzl
Motor bearing needs to be replaced.
With scoring unit
Technical characteristics
Carriage 3200 mm with double roller
Blade Ø 400 mm, hydraulic tilting
Scoring machine
Transverse guide
Double stop
Parallel fence 1300 mm
Digital angle display
Double control with start on rip fence side
Fine adjustment rip fence
Motor 5.5 kW
High quality machine in good condition
DUPLEX in addition (1 000 €) Power and Motors
Cigugpmxwe
Pluging: Three-phased Overall dimensions
- New -
Basic equipment:
- Electromotive height and Swivel adjustment 0 - 46 ° for the main saw blade
- Sliding trolley, trolley length 3000 mm
- rip fence with manual adjustment, adjustable via measure cocoa, including manual fine adjustment,
- cutting width, 1000 mm
- Angle stop with a fixed 90 ° position, manually adjustable using a measuring scale up to 3200 mm
- Saw blade protrusion max. 150 mm
- Saw blade diameter max. 450 mm
- Drive motor 4 kW (5.5 PS) with 1 speeds 4000 rpm
- AKE tool ...
sliding carriage length: 2250 mm
cutting width with rip fence: 1050 mm
cutting width at the cross cut: 2200 mm
cutting height: 150 mm
scoring unit: yes
height adjustment: electrically
tilt adjustment: electrically
rip fence adjustment: manual
display saw blade tilt: digital
display saw blade height: digital
display rip fence: scala und digital
display at the cross cut: digital
saw blade diameter: 550 mm
Drehzahlen:
motor power: 5,5kW
suction connection: 120 mm und 80 mm
D0bqsm
ma...
Altendorf F45 sliding table saw
Manufacturer: Altendorf serviced by factory service department
Type: F45
Year of manufacture: 1996
carriage length: 2.800 mm
cutting width: 1.000 mm
cutting height: up to 150 mm
power: 5,5 kW
saw blade diameter: 300 - 450 mm
Rfa0r
speeds: 3/4/5/6000 rpm digital display
table top extension 800 mm
cutting width adjustment: manual, digital display
Height adjustment: hydraulic
Angle adjustment: hydraulic, digital display
Motor brake: Yes
For sale due to liquidation...
Altendorf f45 prodrive sliding table saw
Dvvddl0
First 24 H
2,6m carriage
CNC paralel fence
Condition maintained
Scorer with Led
Year 19
On off switch on sliding carriage
Price net
Second hand machine
Year of manufacture 1994
Cutting length 2800 mm
Cutting width 1000 mm
anodized finish
automatic brake
motor 5,5 kW
Scorer pre-machining
Ci2buc320v
digital speed display
digital display swivel
HYSH hydraulic lifting, lowering and tilting of the saw aggregate
Parallelogram protection device
table top extension 800 mm
Availability: approx. March/April 2023
Storage location: Hochheim
- New -
Basic equipment:
- Electromotive height and Swivel adjustment 0 - 46 ° for the main saw blade
- Sliding trolley, trolley length 3000 mm
- rip fence with manual adjustment, adjustable via measure cocoa, including manual fine adjustment,
- cutting width, 1000 mm
- Angle stop with a fixed 90 ° position, manually adjustable using a measuring scale up to 3200 mm
- Saw blade protrusion max. 150 mm
- Saw blade diameter max. 450 mm
- Drive motor 4 kW (5.5 PS) with 1 speeds 4000 rpm
- AKE tool cl...
Altendorf format saw with carriage
undercutter 0,75KW on a separate motor, electrically adjustable
format table 340cm on rods
inclination 0-45 electrically adjustable
top and bottom saw electrically adjustable
culaga on the right side manually adjustable with electric readout cutting width, max width 1300mm
main motor 5.5KW
4 cutting speeds
max blades 450mm
tested machine, good condition
Hs7rcdpru
Here we sell an Altendorf WA 6 in very good condition.
Chwwdomlkr
Technical data:
Engine power 4,0 kW
carriage length 2000mm
Cutting width 1000mm
Cutting height 90° 100mm
Cutting height 45° 72mm
(Internal part number 395274)
Available immediately!!!
Sizing saw Altendorf F45
Prodrive
One-sided swiveling
Electric height and tilt adjustment
7,5kw motor
Cutting height 204mm
300cm table
Front support roller
130cm Paralel fence
Angle miter fence
Extended cutting height
20450 €
Plus 19% VAT
New and original packed
0jzce0xr
Immediately available
Altendorf F45 Elmo Drive Saw
Electrically lifted and tilted
Motorized fence on the right side
Digital dimension readout on the ruler,
Main motor 5.5kW, selectable speeds
Speeds: 3,000 / 4,000 / 5,000 rpm.
Disc / blade: 250-450mm
Bkbpzpis
Undercutter / Shooter: YES
Undercutter motor 0.75 kW
Rotational speed 8,500 rpm.
Blade: 120 mm
Working range:
Format table length: 3200 mm
Parallel cutting width: 1300 mm
Crosscut fence with telescope: 3200 mm
special features:
5 digitally controlled axes
elect...
Second hand machine
Used sliding table saw Altendorf type F 45
year of manufacture 1993
Technical data:
Engine power 5,5 kW
saw blade speed 3000 / 4000 / 5000 / 6000 rpm.
max. saw blade diameter 450 mm
Ci2b0lfr9k
cutting length 3200 mm
saw width 1250 mm
with scoring unit
anodized finish
parallelogram guard
table top extension 800 mm
Availability: short term
Location: Hochheim
The Altendorf F 25 offers everything in a small space,
what a sliding table saw must be able to do. And that in
uncompromising Altendorf quality.
A machine for beginners and professionals alike.
Basic equipment:
- Manual height and swivel adjustment 0 - 46 °
of the saw blade, with digital display
- Drive power 4 kW (5.5 HP) with one speed,
4200 rpm.
By9cvudwed
- Sliding trolley, trolley length 3200 mm
- Crosscut-miter fence, lengths up to 3450 mm
- Braking device, illuminated button
- ...
Saw blade height and tilt adjustable
sliding table 2800 mm
motor power 5,5 kW
4 speeds manually adjustable
Cilasjgsne
Cutting width to the right of the saw blade 880 mm
Rip fence to extend 3000 mm
Table widening
F 45 POSIT 45H sliding table saw with tilting saw unit, CNC-controlled height and tilting adjustment of the saw unit and rip fence, CE version.
Digital display of the tilting angle (DIGIT 45), Digital display of the cutting width at the rip fence (DIGIT X), Digital display of the cutting height of the main saw blade, Double roller carriage with hard fabric guides, Cutting to length up to 3800 mm, Cutting length 3200 mm, Format 3200 x 3200, Anodized design of the double roller carriage and the ri...
I sell the format sliding table saw with scoring Altendorf F90, year 1989.
Sliding table length 2800mm.
Max. cutting width on cross fence 2850mm.
Max. cutting width on parallel fence 1250mm.
Motor 7,5 kW.
4 speeds 3000-4000-5000-6000 rpm.
Condition good. Avialable immediately.
Please contact for more photos and details.
Cazlboc0lx
format pia with carriage Altendorf
Undercutter 0,75KW on a separate motor,
format table 320cm on rods
inclination 0-45 electrically adjustable
top and bottom saw electrically adjustable
culaga on the right side manually adjustable max width 1300mm
main motor 5.5KW
3 cutting speeds
Hypqpmz
max blades 400mm
machine in original very good condition
- New -
Basic equipment:
- The new F 45 is a masterpiece in technology and design. The one from the ground up
on newly designed machine frames exceeds all previous values
in terms of torsional rigidity and low vibration. The smooth one
The front and the footroom on the ground let you get closer to that
Sliding table saw and on the workpiece. The constructively adapted,
legendary smooth sliding sliding table is still the measure of all
Things when it comes to precision cuts and freedom ...
The Altendorf F 25 offers everything in a small space,
what a sliding table saw must be able to do. And that in
uncompromising Altendorf quality.
A machine for beginners and professionals alike.
basic equipment:
- Manual height and swivel adjustment 0 – 46°
of the saw blade, with digital display
- drive power 4 kW (5.5 hp) with a speed,
4200 rpm.
- Double trolley, trolley length 3200 mm
- Miter stop, cutting to length up to 3450 mm
- Braking device, illuminated button
- saw blade diame...
A machine for beginners and professionals alike.
basic equipment:
- Manual height and swivel adjustment 0 – 46°
of the saw blade, with digital display
- drive power 4 kW (5.5 hp) with a speed,
4200 rpm.
- Double trolley, trolley length 3200 mm
- Miter stop, cutting to length up to 3450 mm
- Braking device, illuminated button
- saw blade diameter max. 315 mm,
- Saw blade overhang max. 104 mm
- Cutting height 100 mm, 70 mm at 45°
- Machine height 88 cm
Bsjhzk7fpg
Package 5 including:
...
-New-
CE version
- The WA 6 is the smallest Altendorf sliding table saw,
that exist.
- Despite its smaller dimensions, it impresses
great achievements.
- With her strong equipment she trumps herself
the smallest space.
Bwe737t93n
- The cut quality and flexibility are excellent
in daily use.
Technical specifications:
Sliding table length 2600 mm
Motor 4 kW, speed 4200 rpm.
Scoring unit 0.37 kW
Cutting height max. 100 mm, at 45 ° max. 72 mm
manual height and swivel adjustment 0-45 °
Cu...
We make it easier for you to find: "altendorf edition 500"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 250,000 inquiries per month
Olympic Games: Machineseeker sponsors Team Germany
Sample sales contract for used machines in nine languages
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.