Used Altendorf F 45 for sale (58)

Condition: excellent (used), Year of construction: 1990, ALTENDORF F45 tilting circular saw with scoring unit Fjlhezipw Ieccqkogd Scoring unit Double roller carriage, tilting, parallel fence Extension table, table extension, anodized aluminum, table widening, anodized aluminum, upper guard, narrow and wide ----- Technical data ----- Tilting range: 45°, carriage length: 3,200 mm, cutting width: 1,250 mm, max. saw blade diameter: 450 mm, motor power: 5.5 kW, 3 speeds dust extraction port diameter: 80 / 120 mm Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), CATALOGUE NUMBER 8006 TECHNICAL DATA - max. diameter of the main saw blade with scoring blade: 350mm - max. diameter of the main saw blade without scoring blade: 450mm - cutting height with installed 350mm blade: 100mm - electric adjustment of the main blade up/down + angle - electric angle display - electric adjustment of the scoring blade up/down, left/right - spindle diameter: 30mm - spindle locking - with a rip fence carriage - cutting length on the carriage: 3400mm - cutting width with the guide: 1300mm - with a side carriage - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 22mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 4 types of blade speed - electronic speed display - dust extraction port diameter: 120mm, 80mm - table dimensions: 1220x730mm - table dimension with extension: 1440mm - table dimension with extension: 2060mm - blade guard - dimensions (L/W/H): 3550x3400x1500mm - weight: 1140kg ADVANTAGES – electric adjustment of the blade and scoring blade – with original angle guide – carriage length: 3400mm – made in Germany – unpainted – used saw, very good condition Felhccqszh Izpsksgd Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Felhcjy Icbgscqkegd Manual parallel fence LAP laser system Mitre fence (small) Saw blade diameter 250 - 450 mm

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Fgelowrb U Tshccqkod

Condition: ready for operation (used), Connection voltage 380V Main motor 7.5kW Scoring unit 0.75kW Variable drive Double roller carriage 3000mm Fslhccqoy Hq N Aokogd Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Saw blade diameter max. 500 mm Control panel at eye level Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - with electric height and swivel adjustment for the main saw blade, dimension input via keyboard - digital display of the swivel angle and cutting height - CE version - Cutting length 3000 mm - with center and end position locking - Cutting width 1300 mm - Fine adjustment on the parallel fence - Saw blade diameter max. 450 mm - Cutting height max. 150 mm - Cutting height at 45° max. approx. 106 mm - Motor 5.5 kW with 4 speeds 3000/4000/5000/6000 rpm, manually adjustable - with automatic brake and digital display of the speed - 2-axis scoring saw with electric height and side adjustment - RAPIDO scoring system - DUPLEX double-sided miter fence Feljzk N Szshccqkjgd Availability: short-term Location: 63934 Röllbach in age-appropriate condition

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - With electric height and swivel adjustment for the main saw blade, dimension input via keyboard - Digital display of the swivel angle and cutting height - CE version - Cutting length 3000 mm - With center and end position locking - Cutting width 1000 mm - With digital display and fine adjustment - Cutting height up to 175 mm with a saw blade diameter of 500 mm (in this case, the scoring saw must be removed) - Motor 5.5 kW with 4 speeds 3/45/6000 rpm, manually adjustable - With automatic brake and digital speed display - 2-axis scoring saw with electric height and side adjustment Availability: short-term Folhccqezk N Ngsksgd Location: 63934 Röllbach Well-maintained

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - with electric height and swivel adjustment for the main saw blade, dimension input via keyboard Felhsy Ih R Teccqksgd - digital display of the swivel angle and cutting height - CE version - cutting length 3000 mm - with center and end position locking - cutting width 1000 mm - with digital display and fine adjustment - cutting height up to 175 mm with a saw blade diameter of 500 mm (in this case, the scoring saw must be removed) - motor 5.5 kW with 4 speeds 3/45/6000 rpm, manually adjustable - with automatic brake and digital display of the speed - 2-axis scoring saw with electric height and lateral adjustment Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - with electric height and swivel adjustment for the main saw blade, dimension input via keyboard - digital display of the swivel angle and cutting height - CE version - cutting length 3000 mm - with center and end position locking - cutting width 1300 mm - fine adjustment on the parallel fence - saw blade diameter max. 450 mm - cutting height max. 150 mm - cutting height at 45° max. approx. 106 mm Fgslhcoy Siz Iscqksd - motor 5.5 kW with 4 speeds 3000/4000/5000/6000 rpm, manually adjustable - with automatic brake and digital display of the speed - 2-axis scoring saw with electric height and side adjustment - RAPIDO scoring system - DUPLEX double-sided miter fence Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2022, machine/vehicle number: 22-10-12-042, functionality: fully functional, saw blade diameter: 450 mm, height adjustment type: electric, actuation type: electric, table height: 910 mm, Equipment: documentation/manual, saw blade guard, scorer, Altendorf F45 - Pro-Drive Year of manufacture: 2022 Accessories: 2-axis scoring unit Rapido (with pivoting function), safety device, LED lighting, table extension 840 mm, double roller carriage with a length of 3000 mm, miter fence 3200 mm PAK, parallel fence DIGIT x 1000 mm, DUPLEX 1350 mm, single tilting fence Due to a change in production, the machine was no longer put into operation and is therefore new. An identical model is still in use. The machine has never been used in production and was only stored. The machine is being sold as part of the closure of our carpentry business. Collection price - delivery possible upon request. Fslhcsziu Rtscqkogd The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates: July 18 or August 1, from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: good (used), Year of construction: 1994, Sawblade tiltable 45 ° Length of the rolling table 2800 mm cutting width 1250 mm Motor output 5,5 kW Cutting height 150 mm weight of the machine ca. 1100 kg Folhccjzfqkuoqkjgd

Condition: used, Year of construction: 1998, Sliding carriage: 5000 mm Motor: 11 kW / 15 hp Fgolhcey Tl Exocqksd Cutting width: 1050 mm, without scoring blade, prepared for scoring blade Tip Servo Drive Laser-cut seam indicator Electromotive height and swivel adjustment Dimensions: 5000 x 1400 x 1900 mm Weight: approx. 1100 kg Location: Nattheim

Condition: ready for operation (used), Year of construction: 2007, cutting length (max.): 3,000 mm, Panel saw manufactured in 2007. This Altendorf F 45 features a cutting length of 3000 mm, a main saw with a power of 5.5 KW, and a maximum main saw blade diameter of 500 mm. If you are looking to get high-quality cutting capabilities, consider the Altendorf F 45 panel saw we have for sale. Contact us for further details. • Main saw motor power: 5.5 kW Fgelhccqezc I Sfjked • Main saw blade diameter: max. 500 mm • Scoring saw motor power: 0.75 kW • cutting length 3000 mm

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2010 Operating hours: approx. 761 h Sliding table length: 3,000 mm Cutting width: 1,000 mm Cutting height: 197 mm Max. saw blade diameter: 550 mm Speed: 2,000 - 6,000 rpm Speed adjustment: Vario - stepless Fjlhccszdqwloqkjgd Cutting width display: DigitX Scoring saw: No Motor brake: Yes

Condition: good (used), Year of construction: 1984, functionality: fully functional, Offered from a workshop for people with disabilities is a fully functional panel saw. Altendorf F45 Tiltable up to 45° via handwheel Year of manufacture 1984 With scoring saw (no saw blade included) Max. saw blade diameter 400 mm A 350 mm blade is installed Max. cutting height with a 350 mm blade = 98 mm at 90° – 75 mm at 45° With motor brake (approx. 2.5 seconds to stop) Carriage length 2500 mm Cutting width to the right of the saw blade 850 mm Fgolhccqjzdqxvekod Speeds 3/4/5/6000 rpm With cutting line laser Gresser HEnE 632.8 nm 380 Volts Weight 990 kg Emergency stop button + used and new saw blades as shown in the picture

Condition: excellent (used), Format circular saw F45 - Year of manufacture 1994 - Tilts to 45° Fgslhcey Tm N Secqked - Duplex miter stop - Laser with 5mW power, red - Control panel on top - Scoring saw - Digital angle display - 5.5kW main motor - 2800mm sliding table length, 1m to the right of the blade - Electric height and swivel adjustment

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,000 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 45 °, Equipment: CE marking, documentation/manual, saw blade guard, Screen control; parallel fence; storage for 20 programs; double roller carriage 3000 mm; cutting width 1000 mm; cutting height 200 mm; table extension 840 mm; three selectable speeds: 3, 4, 5 rpm. Fgelhoy Nyuaeccqksd

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Scoring unit: Prepared Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Fgelsy Sbvkehccqkjd Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, rotational speed (max.): 5,000 rpm, cutting width at rip fence: 1,300 mm, TECHNICAL DETAILS Saw blade diameter max.: 450 mm Cutting width at CNC parallel fence: 1,300 mm Max. speed: 5,000 rpm Infinitely variable adjustment Double roller carriage length: 3,000 mm Mitre angle stop length: 3,200 mm Digitally adjustable Table extension: 840 mm Pneumatic quick-clamp range: 0-90 mm 2 quick clamps MACHINE DETAILS Power: 7.5 kW EQUIPMENT CE marking Saw blade guard Double roller carriage with TIP-SERVO-DRIVE Air cushion table Spray device with remote control Front support roller 2 pneumatic quick clamps Fjlhccqoy H Errskjgd Digital mitre gauge L CNC parallel fence

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 Folhswrfmajccqksgd S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: reconditioned (used), Year of construction: 2023, machine/vehicle number: GM010.0396, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, table length: 840 mm, Factory-refurbished Altendorf F45 with ProDrive control system! TECHNICAL DETAILS Cutting Data Cutting length: max. 3,200 mm Cutting width at rip fence: 1,300 mm Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Carriage length, double roller carriage: 3,200 mm Table Data Table length: 840 mm Performance Data Power output: 5.5 kW MACHINE DETAILS Machine height: 910 mm Motor power: 5.5 kW (7.5 HP) Dust Extraction Connection Extraction, top: Ø = 80 mm Extraction, bottom: Ø = 120 mm Negative pressure: 1,200 Pa at total suction port, Ø = 140 mm Folhccqexc Uq Hoksgd Air consumption: v_min = 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Lighting Continuously variable speed control Scorer unit LED lighting 3-axis scorer including park position On/off switch on the double roller carriage Angle/miter fence Parallel stop DIGIT X 1,300 mm Front support roller Second support on the double roller carriage

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm Fgsloxuqulehccqked - Front support roller - Duplex 1350

Condition: good (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, table length: 1,400 mm, Types:F 45 ,Machine nr:90-8-86 Fjlhcstxh Niscqkogd

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder Fgjlouh R R Eehccqkod - On/Off switch on the double roller carriage - Front support roller

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Fgjlhcew Ix Alecqksd